Stabilizer

High-speed copper plating of welding wire is brown brown liquid, which is used for non electrodeposition of high-speed copper plating film on iron to facilitate wire drawing process. It can make copper ions deposit orderly, make copper deposit compact, and have strong adhesion. At the same time, the complexing agent can also effectively complexe excessive iron ions in the tank solution, so that the tank solution remains stable. The deposition film is golden yellow and pink, which is loved by users. It can be used as immersion or continuous production line. The weight of copper film is 5-20g/m2

The Proven is a Proven Series Servo controlled stabilizer, that redefines the price performance ratio. Based on programmed logic circuit (PLC) technology. Servotech offers a whole new range of features.

» Servotech Servo stabilizer provides perfectly stable output under severe conditions of unbalanced voltage/current, because of its unique conditions single phase or three phase, distortion less solid state motorizes voltage controller conserves variable energy.
» No effect by any transient over voltage surge with fast correction speed (20V-55V per second)

» Higher Power at lower cost: rating of 10KVA-1000KVA

» Output voltage adjustable (110V output can also be provided)

» No effect on load power factor & overall efficiency above 96%

» Increased life of your equipment reduced heating and minimal losses.

» Optional features include surge suppression, Hi/Low voltage cut off, overload protection, single-phase prevention and bypass mechanism.

» Testing is computerized there by ensuring higher reliability.

Stabilizer

1 unit per box

Servo stabilizer.

Technical Specification Chart:

Parameter
1 - Phase
2 - Phase

3 - Phase
Unbalanced
Air Cooled

3 - Phase
Balanced
Oil Cooled

3 - Phase
Unbalanced
Oil Cooled

Energy
Conserved
Lighting Load

Centralized
Stabilizer for
offices &
residence

Rating (KVA)
1 - 20
0.5 - 20
3 - 100
3 - 200
3 - 250
3 - 500
3 - 500

I/P Voltage
range (V)

170 - 270
195 - 265

340 - 480

240 - 480
340 - 480
360 - 460

310 - 480
340 - 460
360 - 460

340 - 480
360 - 460

310 - 480
340 - 480
360 - 460

310 - 480
340 - 480
360 - 460

O/P Voltage
(normal)
230 V

415 V

415 V

415 V

415 V

208 V LN

220 V / 230 V
LN

Alternate
O/P setting
220 V /
240 V

380 V / 400 LL

220 V LN

220 V / 230 V
LN

O/P V
regulation

± 1% of nominal output voltage

O/P V
Indications

Digital voltmeter, accuracy 1% of FS ± 1 digit

LED
Indications

Front panel LED Indicators, Input ON, output ON, Input high / Low, output High / Low trip

Under over
voltage trip

Electronic cutoff circuit with graded time delay set @ + 5% / -10% of nominal voltage

Over Load
cut off

Electronic cutoff circuit with graded time delay set @ 110% of rated full load current

Short circuit
protection

HRC fuse / MCB at input

Single phasing
prevention

Not applicable

Provide

Individual phase cutoff only

Service
bypass

Not provided

Provide upto 100 Kva. 3 phase

Individual phase bypass
provided up to 50 kVA 3-ph

Resetting
mode

Automatic restart with time delay mode of 15 sec. (optional).

Technical Specification Chart
Parameter 1 - Phase 2 - Phase 3 - Phase
Unbalanced
Air Cooled 3 - Phase
Balanced
Oil Cooled 3 - Phase
Unbalanced
Oil Cooled Energy
Conserved
Lighting Load Centralized
Stabilizer for offices & residence
Rating (KVA) 1 - 20 0.5 - 20 3 - 100 3 - 200 3 - 250 3 - 500 3 - 500
I/P Voltage range (V) 170 - 270
195 - 265 340 - 480 240 - 480
340 - 480
360 - 460 310 - 480
340 - 460
360 - 460 340 - 480
360 - 460 310 - 480
340 - 480
360 - 460 310 - 480
340 - 480
360 - 460
O/P Voltage(normal) 230 V 415 V 415 V 415 V 415 V 208 V LN 220 V / 230 V
LN
Alternate
O/P setting 220 V /
240 V 380 V / 400 LL 220 V LN 220 V / 230 V
LN
O/P V regulation ¦ 1% of nominal output voltage
O/P V Indications Digital voltmeter, accuracy 1% of FS ¦ 1 digit
LED Indications Front panel LED Indicators, Input ON, output ON, Input high / Low, output High / Low trip
Under over voltage trip Electronic cutoff circuit with graded time delay set @ + 5% / -10% of nominal voltage
Over Load cut off Electronic cutoff circuit with graded time delay set @ 110% of rated full load current
Short circuit protection HRC fuse / MCB at input
Single phasing
prevention Not applicable Provide Individual phase cut off only
Service bypass Not provided Provide upto 100 Kva. 3 phase Individual phase bypass provided upto 50 kVA 3-ph
Resetting mode Automatic restart with time delay mode of 15 sec. (optional)

Standard : Certified Company with IS-9815 & ISO 9001-2000

Frequency : 45Hz - 50 Hz AC

Power Factor: Suitable for All

Input: As Above

Output : As Above

Cooling : Air Cooled

Type : Indoor Type

Technology : Microcontroller and Buck & Boost;DimmerType

Load: Unbalanced

Construction: MS Sheet Body, Power Coated, Low Noisy

Wave Form Distortion : Nil

Correction Speed : 20-40V/sec

Response Time : 10 m/sec

Correction Method : Step less correction using Dimmer

Control Circuit : Fully Microprocessor based circuit

Efficiency : Better than 98%

Duty Cycle : 100%

Operation : Auto/Manual

Load Loss : Less than 1 %

Operating : -15 ¦C to 50 ¦C

Servicing & Maintenance : Easley can be do by any technical known Person And from company side 24 hrs/ 7 Days

Components Available : Easley available in market or in company .

1.Servo Type Voltage Stabilizers
2.Electronic Type Voltage Stabilizers
3.Supervolt Power Voltage Stabilizers
4.Isolation Transformers

A Voltage Stabilizer maintains a constant voltage level automatically, offering protection to equipment against voltage surges, under-voltage, or over-voltage while smoothing impulsive noise.

WHAT ARE VOLTAGE STABILIZERS?
A Voltage Stabilizer has been created to maintain a constant voltage level automatically, offering protection to equipment against voltage surges, under-voltage, over-voltage, whilst smoothing impulsive noise. A Voltage Stabilizer is also referred to as an Automatic Voltage Stabilizer, AC Voltage Stabilizer or Voltage Regulator. An Automatic Voltage Stabilizer has been created to automatically maintain a constant level of voltage so that your electrical equipment would be protected at all times against over-voltage, under-voltage as well as surges, leveling impulsive noise.

Voltage Stabilizer is also called Automatic Voltage Stabilizer, AC Voltage Stabilizer or Voltage Regulator.

Specification
Size range: 8 1/2"~26"
Material: AISI 4145H/AISI 4145H mod/AISI 4340/AISI4140-4142/non-mag material
Forging process: Ingot---forging---heat treatment---rough machining---UT.MT---Q+T---inspection---finishing machining
Heat treatment: Normalized / Annealed / Quenched / Tempered
Hardfacing: HF1000, HF2000, HF3000, HF4000, HF5000