Can be applied directly on rusty steel( rust layer ¡ü45um)!
Color and appearance: grey or others
Coating thickness um: 50¡à5mm
Solid content % : 69¡à3%
Overcoating interval: minimum: 4 hours max: unlimited
Recommended substrate conditions and temperature:
1.Remove all oil or grease, soluble contaminants and other foreign matter. All surfaces to be coated should be clean, dry and free from contamination.
2.If applied on the rusty surface, the rusty layer thickness should be below 45 um
3.Apply in good weather, don¡¯t let coating contact any liquid like water or other solvent before completely dry. No painting be carried out in rainy day outdoor , if the humidity is above 85%, please stop painting
4.The temperature of substrate should be above 5¡ãc, lower temperature might not dry or cause a long time to dry
Air spray:nozzle orifice: 1.5-2.5mm
Nozzle pressure: 0.3-0.5mpa
Airless spray:nozzle orifice: 0.4-0.5mm
Nozzle pressure: 12-15mpa
Brush : use soft bursh
Recommended finish: rsl series finish
Shelf life: 12 months
Over coating time
Substrate
Temperature 5¡ãc 15¡ãc 25¡ãc 35¡ãc 45¡ãc
Minimum interval 24hrs 7hours 4hours 3hours 2hours
Maximum interval Unlimited storage temperature : 5-30¡ãc in well ventilated warehouse
Acrylic Wood Sealer
Acrylic Matt Topcoat Clear
Acrylic Gloss Clear Full Gloss
Acrylic White Full Gloss
ACRYLIC WHITE MATT
ACRYLIC BLACK GLOSS
ACRYLIC COLOURS APS/RAL
ACRYLIC SEALER
ACRYLIC MAT TOPCOAT CLEAR
ACRYLIC WHITE PRIMER
ACRYLIC MATT TOPCOAT WHITE
The product is used for all objects required with golden surface coating like Buddha, crafts, etc.
The product is environmental friendly, non-harmful, thinning after adding water, and is used for all objects required with golden surface coating like Buddha, crafts, etc., featuring good gold-like gloss, good decoration.
PW 3305_Platinium Emulsion Silk (W+C)
Ritver Platinum Emulsion Silk is a luxury range emulsion paint specially formulated with a suitable acrylic emulsion with rich titanium dioxide and other high quality pigments. It exhibits good alkali resistance properties.
V300 Interior Acrylic Latex Waterbase paint White and light colors
Product origin : North America
Key Specifications/Special Features :
General Acrylic vinyl paint with a matte finish is characterized by developing its hiding power when dry, recommended To be applied with a brush and roller on plaster, concrete, wood and flat surfaces in general.
Solids BY Weight (%)41% +/- 5%
Viscosity 95 a 105 KU @ 25C
Density (g/ml) 1.31 +/- 0.035 a 25C
Brightness 0 to 5 Glitter Units at 60
Drying Time To the touch 30 minutes, at 25 C (77 F) and 50% humidity-relative. The drying time can be increased depending on the environmental conditions and the substrate
