Features:
1, This product is a new type strong stone adhesive, applied to all kinds of low water absorption stone materials like large-scale artificial stones, culture stones, and natural stones
2, No need to wet the brick wall, effectively improve the efficiency
3, Strong bond ability, material-reducing, much safer and firmer than the traditional cement adhesive, also can reduce the construct trash and the quantity of the wall
4, Good anti-acid and anti-alkali and anti-infiltration and anti-aging function
5, Small shrinking rate, no cracking, can be used in cold and humid environment.
Application:
1, The adhesive for cement plaster, brick, smooth cement wall paste stone
2, The adhesive for low water absorption surface and light steel frame system board, like gypsum board and Eight board.
Surface Treatment:
The substrate surface should be firm, dry and clean, no grease, no wax, and other loose materials.
Operation Process:
1, The ratio: MB tough stone adhesive: water: 3.3: 1 (25kg powder, about 7.5kg water) mixed and stirred into paste, using an electric mixer to make particle paste, put it aside for a few minutes and then a little stirring to gain the better effect
2, Using tooth scraper to scrap the adhesive onto the surface evenly, control within 1m2, then push the stone above it
3, For the ceramic tile with deep ditch or stone material, expect for the surface, scrap the backside of the tile or the stone material.
Normal Amount:
Coverage areas differ according to the circumstance:
1, using 3*3mm tooth scraper about 1.8kg/m2
2, using 6*6mm tooth scraper about 3kg/m2
3, using 10*10mm tooth scraper about 4.8kg/m2
Note: the amount is related to the smooth, vertical rate, and thickness of the stone material
Cautions:
1, make sure the smooth and vertical rate of the surface before operation
2, never mix the dry slurry with water and use again
3, for the painting surface, make sure the initial bond strength and no flake
4, Finishing after 24h can be walked in or fill the crack.
Store Method:
Store in cool and dry place, unopened product can be saved for one year.
25kg/bag
Supplier: Urea 46%, n.p.k for agriculture, npk, glue, adhesive, lamination glue, water based glue, cardboard adhesive, bitumen, fishmeal, hot melt adhesive. pistachio, cattle probiotic supplement, poultry probiotic supplement.
Supplier: Pigment , binder, thickener, fixer for pigment printing.
Supplier: Soda ash
sodium sulphate anhydrous
sodium sulphite
diethylene glycol (deg)
fumed silica
menthol crystal
base oil 150n, bs 150, 600n
rpo (rubber process oil)
lioh (lithium hydroxide)
hco (hydrogenated castor oil)
12 hsa (hydroxy stearic acid)
additive for lubricant and grease
aromatic chemicals
pvp povidone iodine
pvp povidone k30
h2o2 (hydrogen peroxide)
Services: Exporting of industrial chemicals, petrochemical and ethylene glycol series
Buyer: Soda ash
sodium sulphate anhydrous
sodium sulphite
diethylene glycol (deg)
fumed silica
menthol crystal
base oil 150n, bs 150, 600n
rpo (rubber process oil)
lioh (lithium hydroxide)
hco (hydrogenated castor oil)
12 hsa (hydroxy stearic acid)
additive for lubricant and grease
aromatic chemicals
pvp povidone iodine
pvp povidone k30
h2o2 (hydrogen peroxide)
