Wdm Media Converter

Product name: 10/100m fiber media converter

Single fiber

Product intro:

The fiber media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.The media converter transform the transmission media of ethernet signal from cat5 to optical fiber. It can extend the transmission distance to several kilometer or hundred kilometer.Using media converter is a economical solution to achieve long distance transmission base on current status.

Main features:

Support ieee802.3u 10/100base-tx/fx ieee802.3x protocol.

With the function of automatic recovery to prevent system halt.

Indicate the working status.

Avoiding the interference of electromagnetic wave, radio frequency and terrestrial current.

Optional inside and outside power supply.

No adjust electrical and optical environment.

Led indicator light shows the working performance status.

Duplex mode:

Fiber media converter supports full duplex and semi duplex modes, 10/100mbps automatic protocol.

Inserting to 14 slots rack with play and plug.

Led status indicator light makes easy diagnosing network and checking troubleshooting.

Good flow control and reset fuction prevent system halt.

Transmission distance:

Mm(multi mode): within 2 km

Sm(single mode):20km, 40km, 60km, 80km, .100km

Single fiber 1310/1550 wdm

Environment parameters:

Working temperature: 0íµí½65íµ

Storage temperature: -40íµí½+85íµ

Humidity: 5%í½90%

Other parameters:

Inside power supply dimesion: 160mm*110mm*30mm

Outside power supply dimesion: 110mm*70mm*30mm

Rated voltage: ac220v/50hz

Inside power supply: ac 220v/1a

Inside power supply: dc 5v/1a

Technical paramter
1. Accord with IEEE802.3 IEEE802.3u IEEE802.3x IEEE802.1q 100Base-T, 100Base-TX, 100Base-FX standard.
2. Support TCP/IP PPPOE DHCP ICMP NAT protocol
3. Flow control mode: Full duplex adopt IEEE802.3X, half duplex adopt Backpressure's standard.
4. Electricity port support auto-negotiation function, autoregulation transmit mode and transmit speed.
5. Prot supply Auto-MDI/MDIX automatic reverse.
6. Support storage transmit mode

7. Support electricity port's 10M 100M mode or self-adapt mode's switch.
8. Afford of state indicator, external power(output 5V-50Hz 1A)
9. Interface: Electric port RJ-45 fiber port: SC
10. Twisted-pair: CAT. 5 CAT. 6
11. Singlemode fiber: 8/125, 8.3/125, 9/125uM
12. Working temperature: 0~50degree
13. Storage temperature: -20~70degree
14. Humidity: 5% ~ 90%(noncondensing)
15. Size: 26*70*94mm(H*W*L)

Specification
Connect type: SC
Fiber type: Singlemode
Wavelengh: 1310/1550nm
Typical distance: 20KM
Min TX PWR: -18.0dBm
Max TX PWR: -8.0dbm
Sensitivity: <-30dbm
Link budget: 12.0dbm


1KG/pair

1.Product Description

Gigabit Fiber Media Converter with 10/100/1000M single mode Single Fiber Converter is the conversion equipment of Ethernet optical-electronic signals between 10/100/1000M UTP interface (TX) and 1000M Fiber interface (FX). The traditional 10/100/1000M Ethernet can be extended to the distance of 100km through Single Optical Fiber link. The performance and quality of the products are excellent because of adopting latest IC from Taiwan. It must be used in couples, because the transmitted optical differs from the receive optical in wavelength. 6 Group LED indicated lights could fully monitor the working conditions of Converters. It is easy for end-users to observe the conditions of network. The Series product with reasonable price is especially designed for network end-users. There are also many other advantages such as isolation protection, good data security, working stability and easy maintenance.

2.Technical Parameters
Technical Parameters for 10/100/1000M Adaptive Fast Ethernet Optical Media Converter

Number of Network Ports1 channel
Number of Optical Ports1 channelFTTH 10/100/1000M WDM Gigabit Ethernet Fiber Optic Media Converter
Transmission Rateself-adaptive 10/100/1000M
Protocol supportedIEEE802.3/IEEE802.3U etc.
Fiber TypeSingle Fiber
Optic modeSingle Mode
Transmission modehalf / full duplex
Overall Power

Media converter

Parameter
Specifications
Access mode
10/100mbps
Standard
Ieee802.3 10base-t ethernet, ieee802.3u, 100base-tx/fx fast ethernet, ieee802.3x flow control, ieee802.1q vlan, ieee802.1p qos, ieee802.1d spanning tree
Wavelength
850nm/1310nm/1550nm
Transmission distance
Single-fiber single-mode: 25/40/60/80/100km ; category-5 twisted pair: 100m
Port
One rj45 connector, connected to stp/utp category-5 twisted pair one fiber port: multi-mode - sc or st (fiber size: 50, 62.5/125µm) single mode - sc/fc fiber port (fiber size: 9/125µm) single-fiber single-mode - sc/fc fiber port (fiber size: 9/125µm)

Conversion mode


Medium conversion, storing and forwarding

Mac address table


I k

Buffer space


1mbit

Flow control


Full duplex state: flow control; half duplex state: back pressure mode

Delay


9.6us

Bit error rate


<1/1000000000

Mtbf


100, 000 hours

Led


Power tx link ( fiber link action ), tp link1000, tp link100, tp act ) fdx (fx full duplex mode), fx100 (fiber, with a transmission rate of 100m) tp1/2/3/4 link/act (1/2/3/4-port twisted pairs connection action) tp1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100m)

Power


Ac220 0.5a/pc-48(builtin)

Power consumption


5w

Operating temperature


-10~55ºc

Operating humidity


5%~90%

Storage temperature


-40~70ºc

Storage humidity


5%~90% (non-condensing)



Dimensions


140mm * 111 * 30mm(in) 95 x 70 x 26mm(out)

Media converter

Two 10/100m electrical ports, one single-mode or multi-mode optical port
Multi-mode transmission distance: 2km, single-mode transmission distance: 120km, single-strand double-directions /double-strand double-directions.
Set - in 1m cache, supporting 2k mac address self-learning and self-updating capability
Supports forcible execution the cross of 10m, 100m, full-duplex, half-duplex, twisted-pair and automatically adapt to connect auto mdix function directly
Supports rate control function and the rate can been controlled between nx64k (n=1~1600) to 100mbps
Supports renovate system automatically function, support system regular refresh automatically via setting time, protect from system halted
Supports management based on web, snmp, telnet or local console
Supports lld(search disconnected link automatically), llr(return alarm message when disconnected link found)
Supports llcf(report the disconnected alarm message to local network administration)
Detect and control the operational states of electrical port and optical port of the near end and the far end via interface of management
Supports open or close electrical and optical ports through via the far end network management
Supports legal maximum packet size up to 1912 bytes, support cisco, isl and vtp
Physical property:
Input power: ac 100v~220v or dc 48v
Dimension: 191mm x 110mm x 25mm
Environment requirements:
Operating temperature: 0¦-50¦
Storage temperature: -40¦-70¦
Environment humidity: 5-90%(non-condensing)


Export carton with inner box

10gbps media converter, 90 to 240v ac, 12v dc adapter power source type
Specifications:

Interface:

Left side:

One 10gbps rj-45 port
One 10gbps sfp + port (mini-gbic)

Right side:

One rs-232 console port (rj-45 connector)
One power jack

Wire speed cable length: up to 100m cat6a cable for wire speed transmission
Transceiver (phy), teranetics chip for 10gbase-t and net logic chip for 10gbase-r
Temperature:

Main features
In conformity to IEEE 802.3 10 Base-T standard. In conformity to IEEE 802.3u 1000 Base-TX, IEEE802.3z, IEEE802.3abstandard
Built in high efficiency SRAM for packet buffer, with 1K-entry lookup table and 4-way associative hash algorithm
Half duplex: back pressure flow control
Full duplex: IEEE802.3x flow control
Automatic identification of MDI/MDI-X cross line
Technical parameter:
Standard protocol: IEEE802.3 10 Base-T standard, IEEE 802.3u 1000Base-TX and IEEE802.3z standard
Connector: one UTPRJ-45 connector, one SC/ST connector
Operation mode: full duplex mode or half duplex mode
Power supply parameter:
Adapter(External): 110-265V AC input, 5V1A DC output
Power(Internal): 110-265V AC input, 5V1A DC output
Environmental temperature: 0 - 50
Relative humidity: 5%-90%
TP cable: Cat5 UTP cable
Transfer fiber:
multi-mode: 50/125, 62.5/125 or 100/140ª¦m
single mode: 8.3/125, 8.7/125, 9/125 or 10/125

Dimensions:
Power external: 94mm(L)x 71mm(W) x 26mm(H)
Power internal: 150mm(L) x 110mm(W)x 28mm(H)

Technical parameter
1. According with ieee802.3ab/z, ieee802.3u, ieee802.3x, ieee802.1q, 10base- t, 100b ase-tx, 1000base-tx, 1000base-sx, 1000base-lx standard.
2. Support tcp/ip, pppoe, dhcp, icmp, nat protocol.
3. Flow control: full-duplex adopt ieee802.3x, half-duplex adopt backpressure standard.
4. Eletricity port support auto-negotiation function, autoconditioning transmit mode and transmit speed.
5. Port support auto-mdi/mdix automatic reverse.
6. Support storage transmit mode, cache capability is 256k.

7. Support electricity port 1000m mode and self-adapt mode's switch.
8. Afford the state indicator, external power(output 5v~50hz 1a).
9. Interface: electric port: rj-45 fiber port: sc
10. Twisted-pair: cat. 5 cat. 6
11. Singlemode fiber: 8/125, 8.3/125, 9/125um
12. Working temperature: 0 ~ 50degree
13. Storage temperature: -20 ~ 70degree
14. Humidity: 5% ~ 90%(noncondensing)
15. Size: 118mm*86mm*27mm(l*w*h)

Specification
Connect type: sc/fc/st
Fiber type: singlemode
Wavelength: 1310nm
Typical distance: 40km
Min tx pwr: -6.0dbm
Max tx pwr: 0.0dbm
Sensitivity: < -24dbm
Link budget: 18.0dbm


0.5kg/pcs

Media Converter, 10/100M 1310nm SM 5km
Fiber optic media converter

Skype:wirenettehnology

Features :

Surporting : Full duplex and half duplex transmission and capable of automatic negotiation. efficient builtin switching core ,to implement flow control and reduce broadcast packets.

Surporting : The transmission of extra-long packes over VLAN

Surporting : The selection of mutiple types of fiber ports such as dual-fiber multi-mode .dual-fiber single mode and single fiber single mode, to satisty the extended requirements of users.



Technical specifications

Parameter
Specifications

Access mode
10/100Mbps

Standard
IEEE802.3 10Base-T Ethernet,IEEE802.3u,100Base-TX/FX Fast Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS,IEEE802.1d Spanning Tree

Wavelength
850nm/1310nm/1550nm

Transmission distance
Dual-fiber multi-mode: 2Km; dual-fiber single-mode: 25/40/60/80/100/120Km; single-fiber single-mode: 25/40/60/80/100Km

Category-5 twisted pair: 100m

Port
One RJ45 connector, connected to STP/UTP category-5 twisted pair

One fiber port: Multi-mode - SC or ST (fiber size: 50,62.5/125¦m)

Single mode - SC/FC fiber port (fiber size: 9/125¦m)

Single-fiber single-mode - SC/FC fiber port (fiber size: 9/125¦m)

Conversion mode
Medium conversion, storing and forwarding

MAC address table
I K

Buffer space
1Mbit

Flow control
Full duplex state: flow control; half duplex state: back pressure mode

Delay
9.6us

Bit error rate
<1/1000000000

MTBF
100,000 hours

LED
Power TX link ( fiber link action ), TP LINK1000, TP LINK100, TP ACT )

FDX (FX full duplex mode), FX100 (Fiber, with a transmission rate of 100M)

TP1/2/3/4 LINK/ACT (1/2/3/4-port twisted pairs connection action)

TP1/2/3/4100 (1/2/3/4-port twisted pairs, with a transmission rate of 100M)

Power
AC220 0.5A/PC-48(builtin)

Power consumption
5W

Operating temperature
-10~55¦C

Operating humidity
5%~90%

Storage temperature
-40~70¦C

Storage humidity
5%~90% (non-condensing)

Dimensions
140mm * 111 * 30mm(in) 95 + 70 + 26mm(out)








140mm x111 x 30mm(in) 95 x 70 x26mm(out) , 0.5KG/pc