Fusion splicer pt-660
Features
Color lcd monitor and 256x magnification
Compact and lightweight
Reversible monitor with control panel on each side
Maximum wind velocity: 15m/s
8sec splice time, 40sec tube-heat time
Simultaneous x and y views
Large capacity internal battery
System test: ensures the best working condition
User programmable
Auto check fiber end face
Auto calibrate parameters
Store 8, 000 groups of splice results
Multiple language options
Specification
Model Pt-660
Applicable fibers Sm (itu-t g.652), mm (itu-t g.651), ds (itu-t g.653), nzds (itu-t g.655)
Fiber cleaved length 12~16mmú¿coating diameterú¦250ª8mú¬
16mmú¿coating diameter: 250 ~ 1000ª8mú¬
Fiber diameter Cladding diameterú¦80 ~150ª8m
Coating diameterú¦100~ 1000ª8m
Fiber count Single
Fiber aligning method Core or clad aligning
Image processing method Digital
Actual average splice loss 0.02db ú¿smú¬, 0.01db (mm),
0.04db (ds), 0.04db( nzds)
Splicing time Typical 8 secú¼with standard sm fiber
Splicing mode 53(templet), 40(user)
Splice loss estimate More accurate
Return loss ú+60db
Storage of splice result 4000 resultsú¼20 parameter per result
Fiber display and magnification 300xú¿x or y viewú¬, 150xú¿x and y viewú¬
Tube heating time Typical 30 sec
Tube heating mode 8(templet), 24(user)
Tube heating temperature Can be adjusted
Applicable protection sleeve length 60mm, 40mm and a series of micro sleeves
Tension test 2n
Electrode life 2500
No.Of splice/heating with battery Typical 150 cycles (splice/tube heat) with inner li-battery
Display screen 5 inch color lcd monitor
Image change over The fiber image is turned upside down
Terminals Usb 1.1 and vga
Operating condition 0 ~ 5000m above sea level, 0 ~ 95%rh and -10í½50íµ, respectively, max. Wind velocity of 15m/s
Power supply Ac 100-240v with ac adapter; inner li-battery(6600mah)
Dimensions 170mm(l) x170mm (w) x140mm (h)
Weight 2.7 kg excluding battery, 3.3 kg including battery
