Api Gate Valve

API 600 Gate Valve

API 603 Gate Valve

API 602 Gate Valve 8500

Body: wcb, cf3, cf8, cf8m, cf3m
Stem:1cr13, 2cr13, 304, 304l, 316, 316l
Packing, gasket: flexible graphite+stainless steel strip(net)
Applicable medium: water, oil, steam, nitric acid, strong oxidizing medium acetic acid urea category
Operation: spur gear transmission, conical gear transmission , electric transmission
Gate valve: pn1.6-32mpa dn15-800
150-2500lb 1/2"-42"



Package: wooden crate or according to customer's requirements

Nominal Diameter: 2 inch to 52 Inch (DN50~DN1300)
Nominal Pressure:150Lb 2500Lb, PN10 PN420 10K 40K.
Material: Cast Iron, Ductile Iron, WCB, WC6, WC9, LCC, CF8, CF8M, CF3, CF3M, CN7M, 20Alloy, 4A(SS2205), Bronze C95800,etc.
Drive mode: Handwheel, Bevel Gear, Pneumatic, Electric,etc

API 602 Gate Valve

Main features
* Bolted body-bonnet design for valves up to Class 800, 1500, 2500, 4500. Valves with welded bonnet also available on request

* Screwed with a seal-welded body-bonnet design for valves of Class 1500,2500, 4500.

* Bellows-sealed Gate and Globe valves available in Class 800

* Bolted body-bonnet joints provided with spiral-wound stainless steel gasket and graphite filler for maximum protection against leaks

* Die-formed graphite inner packing rings and braided graphite end rings with Inconel wire reinforcement and corrosion inhibitor

* T-head stem-disc connection of gate valve fully meets strength requirements of API 602 and API 598

* Rolled ACME thread on stem for smooth operation

* Tapered shoulder on the stem for back seating

* Self-aligning type gland assembly with stud-and-nut tightening

* Integral hard-faced body seat for globe and check valves

* Spring-loaded disc on check valves suitable for no horizontal applications too

* Gate and globe valves can be offered with electrical actuators

* Austenitic SS forging for body and bonnet of Cryogenic valves, resulting in excellent impact strength, minimal heat loss and resistance to corrosion

* Valves can be offered to NACE MR-0175 and other special NACE requirements

Products:
API 6A Valves (FC Valve, Ballscrew Valve, Hydaulic Valve),
API 6A valve parts(Gate, Seat, Stem, Body, Bonnet)
Size:1 13/16 ¨C 7 1/16¡±
Pressure: 3000PSI-15000PSI
Material: AA-FF.


Wood packing.

Gate valves can be interchanged with Cameron FC,FL series gate valve and fully in accordance with API Spec. 6A, made from modern materials and manufacturing techniques. They are robust, easy to maintain in ther field. Reasonable price and low cost of spares make them the most cost effective valve on the market.

Reliable hydraulic gate valves are complied with API Spec. 6A also.


Features
òManufactured and Tested in Accordance with API.6A and supplied with Full Certification
òSimple structure and renewable gate and seat assembly
òForged body and bonnet
òA True Bi-Directional Valve
òGate to seat, seat to body, bonnet seal and stem backseat are metal to metal sealing
òThe sealing surface of the gate and seat are hardfaced for wear and corrosion resistance.
òGrease fitting in bonnet for easy lubrication
òOne-piece and double-acting gate with long service life
òBoth thrust bearings with large load capacity and composite rubber-plastic stem lip packing reduces operating torque
òStem packing replaceable under full line pressure when valve is in closed position
Available

òNon-rising stem gate valve, rising stem gate valve and hydraulic gate valve.
òMedium: oil, gas, slurry and sour gas
òRated Working Pressure: 2,000psi ~ 20,000psi
òBore Size: all popular
òTemperature: K ~ U
òMaterial Classes: BB ~ HH
òEnd connections: flange, union
òProduct Specification Level: PSL1 ~ PSL4
òPerformance Requirement: PR1, PR2

Body materials:A216 WCB
Trim materials:13cr+AWS ER430
Size:36inch or DN900
Pressure:900lb
connection:flange end
Brand:European brand
in stock 2 pcs.