Sc-B01 Solar Collector For Balcony System

Products intro

Sc-c01
Sc-c01(separate pressurized solar collector)
The pipeline is made of red copper and conducted by heat transfer medium liquid. Water cannot flow in vacuum tubes and operated when confined. The crust uses aluminum alloy mould material of high strength with air flow design. It is furnished in good style.
Can endure high pressure when it works.
Module design, optional combination, which can meet the demand of large water consumption.

Material: aluminum alloy

Solar vacuum tube with heat pipe
A) size: 58 x 1, 800mm
B) qty of tube: 15 / 20 / 25/30pcs
C) hail resistance: diameter 25mm

Insulation layer in chest
A) 50mm thickness imported polyurethane, machinery overall for keeping same temperature and high pressure foam
B) heat preservation: 72 hours

Max. Pressure bearing: 0.6mpa

Iso9001 / ce certificate/en-12975

3 years international responsibility for free repairing or exchange due to original quality problems

1, manifold : red copper
2, manifold casing: aluminum alloy
3, glass tube dimensions: 58mm x 1.8m / 47mm x 1.5m
4, heat preservation: 72hrs
5, hail resistance: 25mm
6, max pressure: 10 bar
7, working pressure: 6 bar
8, coating of vacuum tube: ss-c/cu
9, heat pipe: anti-freezing > -35pâµÆpåGÇÖpâGópóGÇÜG¼pàGípâµÆpóGé¼sípâGÇÜpéG¦c



Solar vacuum tube with straight copper heat pipe, there is anti-freeze liquid inside as medium transfering of heat. By the design the water never come into vacuum tube immediately so the tube will never be broken in low temperature in winter. We use this type for separate pressurized system or integrative pressurized system.
High quality of tri-elements as rose copper, stainless steel and aluminium nitride planting layers, heat absorption rate can reach more than 93%, certify enough power for hot water request.

The heat collectors and the water tanks are connected perfectly, the heat which the panels collected will be stored in the water tank, it guarantees 24 hours per day to provide the hot water, and the system can work even under the -30 degrees. It can supply with a few tons even more water, is an ideal hot water supply system. It is applied to the big hotels, restaurants and other large places.

1: The water tank should be placed higher than the heat collectors, while the models are isolated types and the heat collectors are not pressure-enduring; The water recycled freely by the height difference between the water tank and the heat collectors.

2: The water tank should be placed lower than the heat collectors, while the models are isolated types and the heat collectors are pressure-enduring, the water is recycled by the water pump between the water tank and the heat collectors, the specific pressure-enduring models, please see the information of the pressure-enduring models on the web.

Scm
Products detail:
This is a split pressurized thermal collector, adopting vacuum tube heat pipe technology, is widely used for residential water heating, it's easy to install the tubes.
Daily output of each tube is more than 2.6 gal per day. In some southern states, this number can be expanded.
Service life of this collector can be 20 years plus.
More technology data of this product please feel free to find on the products section or you can download our catalog and get more details.
Manifold size 120*105 mm
Pipe diameter / thickness 35/0.8 mm
Interface 32 mm/ 3/4 inch
Material aluminum alloy
Heat pipe 14*70/8*1650 mm
Vacuum tube 58/1800*1.8 mm
Thermal material rock wool
Absorption 94%
Exchange efficiency 42%
Max flux 0.58l/s
Running pleasure 0.6 mpa
Max idle temp 270 degree c
Model number number of tubes absorber area daily output(131 degree f)
Scm15-58/1800 15 pcs 1.95 m2(20.99 ft2) 105-150 l(30-40 gal)
Scm20-58/1800 20 pcs 2.60 m2(27.99 ft2) 140-200 l(40-50 gal)


Package volume: 0.288 cubic meter, gross weight: 58kgs

1. Inner tank: Import stainless steel SUS304-2B food grade; thickness:1.2mm
2. Outer tank: galvanized steel/Stainless steel SUS201, thickness: 0.4mm.
3. Vacuum tube: heat pipe 58x1800mm
4. The material of insulation:High-density polyurethane integrated foam-forming layer 50mm thickness
5. Frame(Bracket): galvanized steel/Stainless steel
6. Angle: As customer requirement
7. Heat preservation: 72hrs

Solar Syetem
Free-energy high pressure stand alone model is a new type of solar water heater
which adopts advanced heat pipe and all glass vacuum tube technology. High
efficient vacuum tube absorbs heat to the condenser end of itself. Condensor
indirectly contacts with water through a copper cap and it boils water by
releasing heat gained from vacuum tube. The available size of the tank ranges
from 150L to 500L. It has the following features:
1. High pressure storage tangk ( testing pressure = 9bar )
2. No vent and less heat loss as compared to low pressure model
3. Highly efficient heat pipe technology
4. No water introduced into vacuum tube
5. No sealing rubber is needed and hence no leaking problem
6. Easy plug-in installation
7. Freezing resistance
WHOLE PACKAGE
we have solar keymark-En12976 certificate

whole packaging
21 sets fit in a 20" container
43 sets fit in a 40" container

Harness the power of the sun with our cutting-edge Solar Products viz. solar panels, solar Photovoltaic modules (PV modules), Mono Crystalline, Poly Crystalline, grid tied, off grid, hybrid and solar water heater system include storage tanks and solar collectors. Discover eco-friendly solutions for energy generation and consumption, paving the way for a sustainable future.

This system consists five parts: solar collector, work station, expansion vessel, pressurized tank and controller.

This system provides many advantages. It is the simplest and typically the least expensive active system to install. There is no heat exchanger, which allows efficient heat transfer directly to the water.

The system operates at a standard line pressure. It is simple to add capacity to the system if demand changes. The system integrates easily with exsiting system.

Solar heating system

1) once heat-exchange system
2)twice heat-exchange system ( single copper coil )
3) twice heat-exchange system ( double copper coil )



Products are put into cartons firstly. The samples are loaded into the plywood boxes. For the fcl goods, cartons can be loaded into the container directly.

Collector: 47-1500, 58-1800, 70-2000 the new unit triplet gradation membrane collector vacuum tube is efficient in heat absorption and temperature rising.
Inner tank material: sus304-2b imported food-grade stainless steel.
Outer covering material: imported high-quality aluminum-zinc coated steel plate and imported fluorine carbon plate.
Heat insulating layer: 50-65mm polyurethane integral pressure foaming.
Bracket material: high-quality aluminum-zinc coated and plastic-sprayed bracket, all kinds of color is available, the design is more reasonable, the color is more beautiful, it can be fixed flatly or scantly.




50kg per piece

Ke58s
Vacuum tube: 58x1800mm
Inner tank: stainless steel 304 2b food grade
Outer tank: aluminum galvanized sheet
Folded from mould with powder painting
Outer tank dia.460mm
Frame: aluminum with anti-oxidation treatment
Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3
Available sizes: 18, 20, 22, 24, 28, 30, 36
Tubes with capacity 135l up to 325l

In cartons