We supply reinforcing mesh in all standard sizes in a variety of wire gauges in both plain and deformed wire. In addition to this we manufacture mesh for tilt slabs , concrete tanks , commercial flooring components , and security purposes.We can customise sheet sizes and lapping requirements according to particular client needs. Talk to us about your reinforcing mesh requirements or check out the reinforcing mesh size options below.
Reinforcing mesh was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm.
the steel bar after drawing shape as below figure:
1. The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45. The angle scope is greater than 45 and is less than 70, the rib height is from 0.025d to 0.10d.
2. The reinforcing mesh panel includes transverse and longitudinal bar, pitch and overhang. The Australian and new zealand's market, the normal panel size is 2.4m*6m.Because of containers size, we always advise our cutomer to make the panel size to be 2.2m*5.8m. It can be easy to be load and save more USD1000 per container for packing and loading cost.
Steel pallet for reinforcing mesh size 2.4m *6m Loading container for reinforcing mesh sheet: 2.4m *6m
3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars, twin bars or combination of single bars and twin bars.
4.The technical data of reinforcing mesh panle is contained composition and characteristic mechanical porperties of reinforcing steels.
Notes:
1. Grade 250N is supplied as plain round reinforcing steel complying with AS 3679. 1, exceptthe tolerance of the diameter and roundness dosen't apply it.
2. For 500L steel bars, only requriement for wire diameter is less than 5.0mm is RekL 500
Material certificate of reinforcing mesh as below:
Common size of Squre reinforcing mesh panel for Austialian Market
Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6 x2.4 m sheets Cross-sectional area/m width
No. x dia., mm Pitch@mm No. x dia., mm Pitch@mm Unit area kg/sqm Sheet, kg Long'l bars sqmm/m Cross bars sqmm/m
Squre, with edge side-lapping bars
SL102 10 x 9.5 + 4 x 6.75 200100 30 x 9.5 200 5.6 80 354 354
SL92 10 X 8.6 + 4 X 6.0 200100 30 x 8.6 200 4.6 66 290 290
SL82 10 x 7.6 + 4 x 6.0 200100 30 x 7.6 200 3.6 52 227 227
SL72 10 x 6.75 + 4 x 5.0 200100 30 x 6.75 200 2.8 41 179 179
SL62 10 x 6.0 + 4 x 5.0 200100 30 x 6.0 200 2.2 33 141 141
Squre, without edge side - lapping bars
SL81 25 X 7.6 100 60 x 7.6 100 7.1 105 454 454
How can we conctrol our products quality for exporting Autralia?
Firstly, we purchase the material from Steel Factory and inspect chemical composition and mechanical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3.
Secondly, the panel size tolerances measure way as:
a. Panel Size dimensions 6m in length, there is 40mm tolerances.
b. Panel size dimensions 6m in length, the tolerance is �±0.7%
c. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract.
d. Weigh the each bundle weight to calculate each panel weight.
Reinforcing mesh was made by deformed bar after drawn, which is accorded to Australian/New Zealand Standard AS-NZS 4671-2001. The material is 250N, 300E, 500L, 500N and 500E, the mesh spaces is 200mm, there is two sides overhang which is 100mm.
1. The angle of the rib or inclined indentation of the reinforcing mesh panels' bar isn't less than 45°. The angle scope is greater than 45° and is less than 70°, the rib height is from 0.025d to 0.10d.
2. The reinforcing mesh panel includes transverse and longitudinal bar, pitch and overhang. The Australian and new zealand's market, the normal panel size is 2.4m*6m.Because of containers size, we always advise our cutomer to make the panel size to be 2.2m*5.8m. It can be easy to be load and save more USD1000 per container for packing and loading cost.
3.Each sheet of reinforcing mesh panel shall include number of bars,pitch,length,width, and overhang dimensions. And the bar arrangement of reinforcing mesh panel has single bars, twin bars or combination of single bars and twin bars.
4.The technical data of reinforcing mesh panle is contained composition and characteristic mechanical porperties of reinforcing steels.
Common size of Squre reinforcing mesh panel for Austialian Market
Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6 x2.4 m sheets Cross-sectional area/m width
No. x dia., mm Pitch@mm No. x dia., mm Pitch@mm Unit area kg/sqm Sheet, kg Long'l bars sqmm/m Cross bars sqmm/m
Squre, with edge side-lapping bars
SL102 10 x 9.5 + 4 x 6.75 200100 30 x 9.5 200 5.6 80 354 354
SL92 10 X 8.6 + 4 X 6.0 200100 30 x 8.6 200 4.6 66 290 290
SL82 10 x 7.6 + 4 x 6.0 200100 30 x 7.6 200 3.6 52 227 227
SL72 10 x 6.75 + 4 x 5.0 200100 30 x 6.75 200 2.8 41 179 179
SL62 10 x 6.0 + 4 x 5.0 200100 30 x 6.0 200 2.2 33 141 141
Squre, without edge side - lapping bars
SL81 25 X 7.6 100 60 x 7.6 100 7.1 105 454 454
How can we conctrol our products quality for exporting Autralia?
Firstly, we purchase the material from Steel Factory and inspect chemical composition and mechnical property of reinforcing mesh panel in our in-house laboratary according to AS 1554.3.
Secondly, the panel size tolerances meassure way as:
a. Panel Size dimensionsâ?¤6m in length, there is 40mm tolerances.
b. Panel size dimensionsï¼?6m in length, the tolerance is ±0.7%
c. Wire diameter and mesh size measure and weld shear resistance test conformance to AS NZS 4761-2001 and as per contract.
d. Weigh the each bundle weight to calculate each panel weight.
SE92/SE82/SE72/SE62 concrete reinforcing mesh for structural using
Heyou factory can produce concrete reinforcing mesh which is the specification of New Zealand standard AS-NZS 4761-2001.
Details of concrete reinforcing mesh:
Material:250N,500N,500L,300E,500E
Mesh Pitch:200mm
Wire:ribbed steel wire & plain steel wire
Overhang length of two sides:100mm
Wire diameter:6mm,7mm,8mm,9mm
Size:2.4m*6m or 2.2m*5.8m
Packing:1ton more or less per bundle
HS code:73142000
Production Standard: AS-NZS 4671-2001
More feature of concrete reinforcing mesh as below:
Signel-bar meshes Twin-bar meshes
Plain concrete reinforcing mesh Ribbed concrete reinforcing mesh
The ribbed is visible and deep notch.
high quality steel bar as raw materials Resposibility worker for drawing,straightened and cut
Electric resistance welding,the solder joint firmly and beautiful appearance Full auotamatic machine opreation,the panel size high accuracy,
Neatly packing Big place and enough warehouse for stocks
The specification of concrete reinforcing mesh as below
concrete reinforcing mesh specification
Mesh Type and reference number Longitudinal bars Cross-bars Mass for 6x2.4m sheets Cross-sectional area/m width
No. x dia., mm Pitch,@mm No. x dia., mm Pitch,@mm Unit area,kg/sqm Sheet,kg Longâ??l bars,sqmm/m Cross bars,sqmm/m
Structural and skatch
Heyou wire mesh factory as a professional factory for reinforcement mesh,which has 10 workshops,more than 200 workers,advanced production line,perfect production process, Strict production regulations.
We own ourselves laboratory for inspected chemical composition and mechnical property of raw material,drawn wire diameter measuring,cutting wire length measurement ,and full pieces of concrete reinforcing mesh which contained pitch of wire to wire,shearing resistance,tensile strength,yeild strength,elongation,bend test,weight tolerance,size tolerance,ribbed height,pitch of transverse wire ribbed,surface quality and etc. We are strictly to do everything in order to guarantee our concrete reinforcing mesh quality.
Therefore,Heyou Wire Mesh has a high reputation in our field as real manufacturer.
Welded wire mesh kinds :
electro galvanized welded wire mesh, hot dipped galvanized welded wire , PVC welded wire mesh ,
stainless steel welded wire mesh, BRC 3315 Mesh ( special welded wire mesh for Singapore and Malaysia Market .)
Welding characteristics:
Including galvanized before or after welding . It is divided into hot dipped , electro galvanizing , PVC coating , plastic sprayed . It has the characteristics of corrosion-resisting and oxidation-resisting .
Welded wire mesh Using :
Industry , Agriculture , Building , Transportation , Mine , Filed , Lawn , Cultivation , Fence Guade , Decorate , Machine Protection and etc.
According to the wire diameter and opening, we can offer standard welded wire mesh or heavy type welded wire mesh.
Differernt processing means we offer for your choice include: hot-dip galvanized welding wire mesh; hot-dip galvanized before welding wire mesh; electric-galvanised after welding wire mesh; electric-galvanised before welding wire mesh.
