Mixing Machine

Heating cooling mixing machine

Our horizontal mixers are suitable for mixing of various resins (pvc, pe, pp, and modified ptfe) with additives, auxiliary chemicals and fillers, dispersion, coloring, drying and homogenizing as well as for the removal of volatile components and drying of engineering plastics such as avs and pc before processing. Rational allocation for clients as per requirement, or individual purchase)
Model no.: srlw200/500, srlw300/1000, srlw500/1600, srlw800/2000, srlw800/2500, and so on.

Special features:
1) uniform and fast mixing
2) precision temperature control
3) high automatic degree
4) easy operation
5) packing: refer to international standard of export packing

Wooden cases

Plough-shear mixing machine

Ldh plough-shear mixer mainly consists of conveying system, horizontal body, shears and fly bars, with the function of the plough-shear, on one hand the material moving along the inner side of the drum body circumferentially and radially, on th other hand, the material was being splashed along the normal of the double side of the shears, when the material touched the fly bars.
It is thrown by the fly bars with high rotary speed, with the multiplex function of the plough shears and fly bars, the material is convecting, espanding and turning over, so that it could obtain a good mixing efficiency in a short time.
Its structure is suitable for mixing the solid at the same time adding the liquid, and also for mixing wet granules which diameter is ranging from 0.3-3mm.

china coal0001
18660760281
. Electric Dry Mix Shotcrete Machine
Introduction of Electric Dry Mix Shotcrete Machine
Electric Dry Mix Shotcrete Machine can be used for tunnels, hydro-power engineering, mines, underground engineering, civil engineering and slope stabilization, etc.
Artificial soil seeding for no soil surface, such as rock, sand, and for no fertility soil surface.
Refractory spraying and repair for industrial kilns or kilns?? inner liner.
The characteristics as follows:
(1)Efficient electric motor
(2) Perfect hermetic function and longer serviceable life
(3) Material flow uniformity stable
(4)Improved performance and high quality
Parameter of Electric Dry Mix Shotcrete Machine

Model PZ-7
Capacity (m3/h) 7
Max. Conveying Distance (Horizontal,Vertical m) 200,20
Use material ratio(Cement/Sand) 2001-3-5
Use material water-cement ratio ?¤0.4
Max. Aggregate Diameters (mm) 20
Feeding pipe inner diameters(mm) 64
Rotor Diameter(mm) 480
Working pressure (MPa) 0.4-0.6
Air consumption (m3/min) 8-10
Motor Model  Y132-6-7.5KW
Voltage(V) (according to customer's special requirement) 380,660,etc 
Overall size (mm) 1500*700*1280
Overall weight (kg) 700

WSZ3000E shotcrete machine is a universal concrete spraying machine for the processing of wet or dry mix.

The machine is suitable either for manual spraying or by means of a robotic arm.

WSZ3000 is developed for the application of shotcrete in tunnel building, mines and slopes. This machine has been designed especially for fibre spraying. And the dosing unit is combined with this machine.

Basic: Electric drive can be combined with tyre chassis.

Extended (optional): Air motor drive or diesel drive combined with Skid or Rail-wheel
We are the shfactory, we can customize according to your requirements. If you have any questions, please contact us and we will provide you with the corresponding product parameters and quotations. Contact us for more information.



Wode Heavy Industry Co., Ltd., short name Wodetec, is a manufacturer specialized is R&D, manufacture and sale of concrete shotcrete machine.

We have developed full series of dry-mix shotcrete machines and wet-mix shotcrete machines, output from 1.5m3/h to 9m3/h, electric motor, diesel engine, air motor and gasoline engine are available options for customization.

From years of experience Wode Heavy Industry Co., Ltd. has developed its own R&D and technician teams, which supports further development and customized service for clients.

We also produce grouting machine, grouting equipment, mixing equipment, foaming machine, concrete pump, hose pump and a series of products.

Wet mix wall plastering machine for sale

PRODUCT APPLICATION

The dry ready mix plaster machine (SX30) is designed for the application of any type dry ready-mixed mortar based on cement,gypsum and insulating mortar, it is a kind of machine with self-suck water device,mini compressor and rotor devices integrated, The machine consists of portable units,permitting easy and comfortable transport due to their small and handy dimensions and low weights.so the materials are just mixed by the machine automatically and it can supply water automatically,it operates very easy.
The wet mix plaster machine (SPT30) is suitable for spraying the wet ready-mixed motar, and their materials can also be the mixed cement ,sand and water or other available mortas that can be stired. No mater which of the material you use, you should mix them with water in advance .This kind machine also consists of portable units,and the material is sprayed out constinuously and evenly. but because of its special spares, the cost of the later maintenance will be a little higher.
The hose pump plaster machine (SHT38) is working by hose pump,its material just the same as SPT30. And it not only can be used for plastering but also for long distance pumping. Also compared with the wet mix plaster machine,the cost of the later maintenance is lower,but the continuity of the material pumped and sprayed out are not as well as the wet mix plaster machine(SPT30) .

If your material is the ready- mixed mortar, you can choose any kind of the three,
If you want use the cement and sand , you can choose the wet mix (SPT30) and hose pump plaster machine(SHT38).
Or you want to use it both for plastering and long distace pumping, you can choice the hose pump plaster machine(SHT38).
Is there any kind of machines you are interested ? Please let me know, If you don't know which kind of to choose, you can tell me your requirement. for example , your requirement of the composition of the material, the max grain size or the material ratio etc. and i can give you some suggestions.

Batch capacity:-to loader shaft is through a con clutch & chain the machine can be operated by diesel engine or electric motor
Transmission: - to loader shaft is through a con clutch & chain the machine can be operated by diesel engine or electric motor
Power requirement: - a: diesel 6.5 h.P 1500 r.P.M air or water cooled diesel engine
B: electric 7.5 h.P. 3phase 1400 r.P.M drive electrical motor
Handling: - 4 nos. Pneumatic tyre with roller bearing with excel shaft


Mechanical hopper
Model size:-king280ltr
Drum speed:-24-27 rpm
Production rate:-6 to 8 cu.Mt.
Weight:-1480

Specification (with Electric motor drive):
Rated Output 5m3 /h
Max. Horizontal Conveying Distance 200m
Suitable Mix Ratio(Cement/Sand) í_1:3~5
Water Cement Ratio <0.4
Max. Aggregate Size ª¦15 mm
Conveying Hose Inner Diameter 51mm
Operating air Pressure 0.2-0.4MPa(29-58PSI)
Air Consumption 8~9m3/min(285-325CFM)
Motor Power 5.5kW(7.5hp)
Voltage 220V,380V, 440V,660V,50Hz/60Hz
Material Charging Height 1.1m
Rotor Speed 11r/min
Overall Dimension(Lí-Wí-H) 1.35í-0.75í-1.2m
Net Weight 720kg.

Feature
(1)The mixing period is short, and the mixing degree of homogeneity is high: the general materials degree of homogeneity CVí_5% between 45 second and 60 second.
(2)The mixture doesnt lead to deviate: this machine continues to mix material cannot arise classification after one minutes mixture good.
(3)The discharging is fast and leftover is small: the base adopts double-pen long door structure, so discharge fast.
(4)Liquid charging quantity is big: the material can be mixed evenly when added 30% liquid.
(5)The chain of sprocket wheel adopts three-line chains structure, and the rotor circumvolving in opposite direction is driven by the colloidal speed reducer. The transmission organization special, run steady, transport torque big and wear is low.