Two Drums Pressure Screen

Material Stainless Steel
Color Grey
Usage Industrial

Driven Type Electric
Phase Three Phase
Frequency 50 Hz

GF480 Trommel DrumVibrating Dirt Screen Scrolling for filtering,
Width 190 Cm (0.9m)
48â?³ Drum Diameter with adjustable speed
Powered 480v / 60 hz 4kw Motor
Integrated coarse separator in hopper
Equipped with Vibration Motor
Versatile various materials wood chips , peat , topsoil , partials & compost
Capacity 20-40 Tons per hour
Mesh Sizes ready available in north america

Specs
Dimensions 7 ft 8â?³ x 6 ft 6â?³ x 8 ft 7.9â?³ (LXWXH)
Screening area 6.5M2
Max bucket width 5 ft 10.9â?³
Drum Diameter 48â?³
Power input 480v 4kw 60hz
Weight approx. 2400 lbs
Mesh opening 3/4
Drum Speed 1-240 per min

Huatao supply high quality pressure screen
1. Upflow presssure screen
Application: Used for coarse screening and fine screening of the deinking pulp,waste paper pulp.
2. Outflow presssure screen
Application: Outflow pressure screen used for coarse screening and fine screening of the chemical pulp,waste paper pulp
3. Inflow pressure screen
Application: Used for the screening of low consistency pulp before the paper machine.

Paper Mill Outflow Pressure Screen/Coarse Screen/Fine Pressure Screen
Used for fine screening waste pulp and all kinds of coarse and fine pulp.
1. The rotor is rotated outside of the sieve drum, and the heavy impurities flow away from the sieve drum to avoid clogging the screen cut and prolong greatly the service life of sieve drum.
2. It has low pulse, high screening efficiency and reliable operation.
Features:
This equipment can be fitted with energy-saving rotors: coarse screening.
Rotor, fine screening rotor and headbox screening rotor.
Corresponding shell body and screen cylinder can match each
Different rotor, thereby achieving screening different pulp kinds with
High screening efficiency and low power consumption.

Bath Soap Simplex Plodder Machine

Worm Screw Sizes: 3 Inch, 4 Inch, 5 Inch, 6 Inch, 8 Inch, 10 Inch, 12 Inch (Custom sizes available)

Raw Materials Used: Mild Steel, Cast Iron, Aluminium Silicon, Stainless Steel (if required)

Technical Specifications:
Machine Type: Simplex Plodder
Worm Screw Press: Single Worm, Diameter options available
Motor: 4 Inch Plodder runs on 5 hp, 3 Phase, 1440 rpm (As per plodder size & type)
Mouth Piece: Equipped with die heater and refining screen barrel
Cooling: Cooling tank and conical end pipe for optimal back pressure
Changeable Extrusion Die: Allows for versatility in soap bar shape
Refining Screen: Removes air bubbles, homogenizes soap
Heating Device: Maintains proper temperature, removes moisture and impurities
Electric Thermostat: Regulates temperature for optimal processing
Cooling Jacket: Prevents excessive heating, ensures solid soap bars

Capacity and Uses:

The Bath Soap Simplex Plodder Machine is designed for forming various types of soap bars, including toilet soap, bath soap, laundry soap, hotel soap, and medicated soap. It efficiently processes thin soap strips from the triple roll mill, strongly compresses and forwards them through a conical forepart, and forms soap bars of desired shape and width.

Benefits and Features:
Efficient Extrusion: Worm screw press ensures thorough compression and uniform extrusion of soap material.

Heating and Refining: Die heater, refining screen, and heating device maintain proper temperature, remove impurities, and create smooth bars.

Customization: Changeable extrusion die allows for different soap bar shapes.

Cooling Jacket: Prevents excessive heating during back pressure, ensuring solid soap bars.

Electric Thermostat: Precise temperature control for optimal processing.

Easy Maintenance: Smooth operation and easily maintainable components.

Space Efficiency: Requires minimum working space.

Ergonomic Design: Appropriate working height for comfortable operation.

Monoblock pumps -
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

salient features
- High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Inbuilt thermal overload protector in al single phase pumpsets upto 2.0 HP
- Specially designed for wide voltage operation
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life
- Back pull-out design for easy servicing and repair
- Double shielded ball bearings, so no need of external lubrication
- All Model fitted to Mechanical seal.

specification
- Power Range : 0.37Kw - 1.5 Kw (0.5 HP - 2.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 32 Mtr.
- Maximum Flow Rate : 940 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Method of Starting : Permanent Split Capacitor (PSC)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 25 X 25, 32 X 25, 40 X 32, 40 X 40, 50 X 40,
50 X 50, 65 X 50, 80 X 65, 80 X 80 (All size in mm)

characteristics of clear cold water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : EN-8
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Plastic

Monoblock Pumps
Falcon centrifugal monoblock pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

salient features
High operating efficiency resulting in lower power consumption
- Good suction lift characteristics
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- Mechanical seal is provided as per customers requirement

Specification
- Power Range : 2.2 Kw - 11.2 Kw (3.0 HP - 15.0 HP)
- Version : Three Phase, 380-415V, 50Hz AC Supply
- Speed : 2880 RPM
- Maximum Total Head : 65 Mtr.
- Maximum Flow Rate : 1450 LPM
- Maximum Suction Lift : 7 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Stuffing Box
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Three Phase, Electrically Reversible
- Nominal Pumpset Size (Suction X Delivery in inch) : 50 X 40, 50 X 50, 65 X 50, 80 X 65, 80 X 80
100 X 80 and 100 X 100 (All size in mm)

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 mÃ?/sec (max.)
- Ph Value : 6.5 to 8.5

Material of construction - motor
Part Name Material
Gland Dori : Graphite String
Motor Shaft : EN-19 with SS SLEEVE
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : FG-250
Cooling Fan : Aluminium

Falcon regenerative monoset pumpsets are powered by a totally enclosed fan cooled AC induction two pole motor. Motor stator is made of low watt loss silicon steel laminations assembled under pressure and rigidly locked in the
frame. The windings are of high-grade enameled copper wire offer excellent resistance and are varnish impregnated. Construction of motor frame and usage of quality materials result in high performance and low temperature rise
thereby increasing the life cycle of the motor.

Salient Features
High operating efficiency resulting in lower power consumption.
- Good suction lift characteristics.
- Specially designed for wide voltage operation.
- Dynamically balanced rotating parts including rotor and impeller ensures minimum vibration and longer life.
- Back pull-out design for easy servicing and repair.
- Double shielded ball bearings, so no need of external lubrication.
- All Model fitted to Mechanical seal.

specification
Power Range : 0.37 Kw - 0.75 Kw (0.5 HP - 1.0 HP)
- Version : Single Phase, 220-240V, 50Hz AC Supply
- Speed : 1440 RPM
- Maximum Total Head : 18 Mtr.
- Maximum Flow Rate : 4200 LPH
- Maximum Suction Lift : 8 Mtr.
- Degree of Protection : IP 44
- Class of Insulation : B0
- Maximum Ambient Tem. : 40 C
- Sealing : Mechanical Seal
- Type of Duty : S1 (Continuous)
- Direction of Rotation : Single Phase, Clockwise from driving end
- Nominal Pumpset Size (Suction X Delivery) : 25mm X 25mm

Characteristics Of Clear Cold Water
- Maximum liquid temperature : 33C max
- Permissible amount of sand : 25 g/m
- Allowable solids : 3000 ppm (max.)
- Chloride ion density : 500 ppm (max.)
- Turbidity : 50 ppm silica scale (max.)
- Hardness (Drinking Water) : 300 ppm (max.)
- Specific gravity : 1.004 (max.) 6
- Viscosity : 1.75 x 10 m/sec (max.)
- Ph Value : 6.5 to 8.5

material Of construction - Motor
Part Name Material
Mechanical Seal : Carbon & Ceramic
Motor Shaft : SS-410
Motor Body : FG-250
Bearing : SKF
End Cover : FG-250
Bracket : FG-250
Flange : FG-250
Casing : FG-250
Impeller : Brass
Cooling Fan : Plastic