Selector switch
Stage with many difference panel and button, which are widely used to change position of ammeter and voltmetr, to control the direction of motor and other circuit.
Model number: H15
Application: Guitar
Mounting type: PCB mountable, Welding/Soldering
Poles: 1-2 Poles
Voltage proof: Check data sheet
Timinal strengh: 1 kgf for 1 minute
Stopper strengh: 5 kgf.cm min
Life Cycles: 10,000 cycles
Short handle stay put black short handle selector switch stay put 2-position switch push button
type : XB2-BD21 / XB2-BD25 / XB2-BD41 / XB2-BD45
place of origin : Zhejiang Province,China(Mainland)
brand name : NIN
protection level : IP40,IP65 is available on request
max. current : 10A
max. voltage : 380V
material : metal and plastic
self restoration : 2 position self-lock / 2 position Key 1 spring return to centre
IP rating : IP 40,IP 65 is available on request
black short handle stay put 2-position selector switch
place of origin : Zhejiang Province,China (Mainland)
brand name : NIN
type : XB2-BD21 / XB2-BD25 / XB2-BD41 / XB2-BD45
self restoration : 2 position self-lock / 2 position Key 1 spring return to centre
IP rating : IP 65
Piano type switch
Specifications of piano type switch
2pos, 3pos, 4pos, 5pos, 6pos, 7pos, 8pos, 10pos, 12pos.
Mechanical
1.Operation force: 800g max
2.Stroke: 2.00mm
3.Operation temp: -20degree~70degree
4.Storage temp: -40degree to 85degree
Materials
1.Base: engineering plastics, black.
2.Cover: engineering plastics, red or blue.
3.Button: engineering plastics, white.
4.Terminal: alloy copper, gold plating.
Electrical
1.Electrical life: 2000 operations cycles per switch.
2.Non-switching rating: 100ma, 50vdc
3.Switching rating: 25ma, 24vdc
4.Contact resistance: 50mª+ max, at initial;100mª+ max, after life test.
5.Insulation resistance: 100mª+, 500vdc
6.Dielectric serength: 500vcd/1 minute
7.Capacitance: 5pf max.
8.Circuit: single pole single throw.
Soldering and cleaning processes
1.Keep all switch contacts in their "off" position for all operation .
2.Wave soldering: recommended solder temperature at 260degree max.5 seconds for ic type.
3.Hand soldering: use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds, while applying solder.
4.Reflow soldering: reflow zone 240degree for 20 seconds.(for smt type, see the picture)
5.Cleaning process: flux clean using force rinse, high agitation or triple bath cleaning mathod.
Freon tf or te give excellent results.When vapor methods are used do not subject the switch to solvents at temperature above 51degree.
Packing
All dip switches are packed in standard ic tube.
TERMINAL: Alloy copper,Tin plated
Our company manufacturer has developed itself of the designing, production and development of cabling products on logical network.
ELECTRICAL
1.Electrical Life: 2000 operations cycles per switch.
2.Non-Switching Rating: 100mA,50VDC
3.Switching Rating: 25mA,24VDC
4.Contact Resistance: 50mª+ Max,at initial;100mª+ Max,after life test.
5.Insulation Resistance: 100mª+,500VDC
6.Dielectric Serength: 500VCD/1 minute
7.Capacitance: 5pF Max.
8.Circuit: Single pole single throw.
SOLDERING AND CLEANING PROCESSES
1.Keep all switch contacts in their "OFF" position for all operation .
2.Wave Soldering: Recommended Solder Temperature at 260degree Max.5 seconds for IC type.
3.Hand Soldering: Use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds,while applying solder.
4.Reflow Soldering: Reflow zone 240degree for 20 seconds.(for SMT type,see the picture)
5.Cleaning Process: Flux clean using force rinse,high agitation or triple bath cleaning mathod.
Freon TF or TE give excellent results.When vapor methods are used do not subject the switch to solvents at temperature above 51degree.
PACKING
Our company manufacturer has developed itself of the designing, production and development of cabling products on logical network.
ELECTRICAL
1.Electrical Life: 2000 operations cycles per switch.
2.Non-Switching Rating: 100mA,50VDC
3.Switching Rating: 25mA,24VDC
4.Contact Resistance: 50mª+ Max,at initial;100mª+ Max,after life test.
5.Insulation Resistance: 100mª+,500VDC
6.Dielectric Serength: 500VCD/1 minute
7.Capacitance: 5pF Max.
8.Circuit: Single pole single throw.
SOLDERING AND CLEANING PROCESSES
1.Keep all switch contacts in their "OFF" position for all operation .
2.Wave Soldering: Recommended Solder Temperature at 260degree Max.5 seconds for IC type.
3.Hand Soldering: Use a soldering iron of 30 watts, controlled at 320degree approximately 2 seconds,while applying solder.
4.Reflow Soldering: Reflow zone 240degree for 20 seconds.(for SMT type,see the picture)
5.Cleaning Process: Flux clean using force rinse,high agitation or triple bath cleaning mathod.
Freon TF or TE give excellent results.When vapor methods are used do not subject the switch
