Solar Water Heater - Pressurized

Solar Water Heater Pressure Temperature Valve (PT Valve)

Model NO.: UP-PTValve
Min order:100 pieces
Accept Min order:Yes
Supply Ability:1000000 pieces / Week
Country of Origin:China
Stock Time:20 Days
Size: 3/4
Temperature Rating: 90 Degrees Celsius
Pressure Rating: 8 Bars / 116 PSI
Material: Brass

Features
The Pressure Temperature (TP) Valve is designed to protect the users and tank of the solar water heater.
The PT relief valve controls the temperature and pressure of the system within safe parameters.
Preventing hot water from being able to reach temperatures of over 90°C and pressure in excess of 8 Bars (116 PSI).
On reaching these settings, the valve discharges a sufficient amount of water into the atmosphere so that the temperature and pressure return to within the systems safe operating limits.

1.Non-pressure one pipe inlet-outlet:
Characteristics:
This type uses the all-glass evacuated solar collector tubes as the heater-absorbing element. The high vacuum degree of the clearance between the out and inner tube reduces the heat emission. The layer films(coating) of all-glass evacuated tubes transfer the sun energy into heat energy. Depending on the different density between hot water and cold water, a water flowing cycle is created in the tube. Hot water flows automatically upwards while the cold water flows down,The water in the storage tank will be heated this natural circulation.
Material:
Ocean01
a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800
b. Inner tank: SUS304-2B,0.4mm
C. Out tank: SUS304-BA,0.4mm
d. Frame: SUS202,1.2mm
e. The material of insulation: polyurethane
Ocean02
a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800
b. Inner tank: SUS304-2B,0.4mm
C. Out tank: drawbench silver steel,0.4mm
d. Frame: coated galvanized steel-1.5mm
e. The material of insulation: polyurethane
Ocean03
a. Vacuum tube: GB-AL-N/AL-47-1500/58-1800
b. Inner tank: SUS304-2B,0.4mm
C. Out tank: drawbench silver steel,0.4mm
d. Frame: Aluminium alloy, 2.5mm
e. The material of insulation: polyurethane
Split pressurized flat plate solar water heaters
Characteristics:
a. Collector separates with the storage tank. The tank can be put anywhere of the house
b. And the collector can be put on both tilted roof and flat roof
c. Module design, arbitrary combination, harmony with the building perfectly.
d. Intelligent control and automatic operation
e. Anti-freeze: no water inside the tubes when it works
f. The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature.
g. Multifunction: bathing, washing, domestic heating
h. Working at any time and enjoyable.
Material:
Ocean04
a. Vacuum tube: GB-CU-SS-N/AL-58-1800
b. Inner tank: SUS304-2B,1.2-2.0mm
C. Out tank: Painted steel-0.4mm
d. Frame: Aluminum alloy,2.0mm
Integrated pressurized flat plate solar water heater
Characteristics:
a. It is completely made of copper, good performance under pressure; the black-chrome-plated copper-strip and copper-pipe is welded by ultrasonic welding machine
b. The black-chrome-plated coating has excellent quality, with high absorption efficiency and low emissivity
c. The coating is resistant to high temperatures of 220 centigrade., the performance and quality of collector will not be affected; materials and coatings can bear fierce weather and have long life span; endothermic copper-strip with Nickel-plated has excellent resistance to corrode, which can be used more than 15 years.
Material:
Ocean05
a. Inner tank: SUS304-2B,1.2mm
b. Core: black chrome
C. Out tank: Drawbench silver steel, 0.4mm / stainless steel,0.4mm
d. Frame: Aluminum,2.5mm
Flat plate solar water heaters.


Customized.

KES58
Vacuum tube: 58x1800mm
Inner tank: Stainless Steel 304 2B food grade
Outer tank: Aluminum Galvanized sheet
Folded from mould with powder painting
Outer tank dia.460mm
Frame: Aluminum with anti-oxidation treatment
Insulation: 50mm polyurethane total forming with pressure and best density 40kgs/m3
Available sizes: 18, 20, 22, 24, 28, 30, 36
tubes with capacity 135L up to 325L
Note: 1. with heater exchanger 12mm,max.pressurized 8bar;
2.state water supply direct enter into the inlet water hole, go through the heat exchanger hot water come out from the outlet water hole;
3.the air vent hole can connected with central heat supply pipe to heat the tank wate

Sunstar high pressure stand alone model is a new type of solar water heater which adopts advanced heat pipe and all glass vacuum tube technology. Highly efficient vacuum tube absorbs heat from sunlight and heat pipe transfers heat to the condenser end of itself. Condensor indirectly contacts with water through a copper cap and it boils water by releasing heat gained from vacuum tube. The available size of the tank ranges from 150l to 250l.

SYSTEM DESCRIPTION
VISION VPF series solar water heater usually incorporates a number of high efficiency flat panels, a top situated high pressure hot water tank, supporting bracket and accessories.
MAIN FEATURES
Reliable collector with average daily efficiency over 54.1%
High efficiency flat panels for fast direct water heating
System works without high temperature problem
High pressure hot water supply from storage tank
Compatible with electric or gas heating devices
Working all year round even in cold climate
Designed for 25 years working life
SPECIFICATION
Tank capacity: 100; 150; 200; 250; 300 Liter
Flat panel size: 2000*1060*82 MM ( L*W*H )
Cover glass: Low-iron tempered glass with transmittance =92%
Absorber coating: Selective black chrome or blue TiNOX coating
Header and riser: High-quality red TU1 copper tubes 22MM inlet outlet
Frame material: Anodized aluminum alloy with anti-aging elastic sealing
Inner tank material: Food-grade stainless steel SUS304-2B or SUS316L
Tank insulation: High-density PU foam with 80 hour heat preservation
Outer tank material: High-quality color steel or stainless steel
Bracket material: Galvanized steel; stainless steel; aluminum alloy
Accessories: Solar controller; electric heater; magnesium anode
Bracket angle: 25°; 38°; 45°
Working pressure: 6.0 bar
Working life: 25 years

Non-Pressurized Solar Collector Solar Water Heater (60L 80L 100L 140L 160L 180L 240L 300L 400L 500L)


Specialty
1. Economical type for most of area, common people can afford it
2. Simple product structure: Solar collector and water tank connected together directly, no need of pipe to connect, and no pump to push fluid
3. Mature technology and stable operation
4. Higher efficiency on photo thermal conversion. 
5. Accessory is popular and easy maintenance

Solar water heater Specifications: 

1) Inner tank thickness of solar heater: 0.4mm, 360mm/370mm/380mm
2) Outer tank thickness of solar heater: 0.4mm, 460mm/470mm/480mm
3) Inner tank of solare water heater: SUS304 food grade stainless steel. 
4) solar water heater Outer tank: Stainless steel, 0.4mm
5)solar water heater tank capacity: 80L/100L/120L/150L/180L/200L/240L/250L/300L
6) Thickness of solar water heater bracket: 1.5mm
7) Glass vacuum tube of solar water heater: 58mm X 1800mm

Remark: 
1. Solar heat storage tank diameter(mm): 460mm/480mm
2. Thickness, insulated(mm): 50mm
3. Vent connection(inch): 1/2''or /3/4''
4. Electric heater: 47mm 1500W, 3/4''
5. Water connection(inch): 1/2'' or 3/4''
6. Collector angle(degree): 25-45

Syc-h
Products detail:
Syc-h, integrated pressure system
Model nmber tube specs tube coating tank capacity (l/gal)
Syc-150h diameter:58mm*1800mm*15 heat pipe 150/40
Syc-200h diameter:58mm*1800mm*20 heat pipe 200/50
Syc-300h diameter:58mm*1800mm*30 heat pipe 300/80
Oem and customization are available.


27-42 sets inside a 20'gp

Sfct, split pressurized system for residential
A solar water heating system includes three parts, it is collector, water tank and pump station.
This system can do more than just producing hot water, in winter, it can also be used in a space heating system. Homeowners in ny, nj, mi and all northern states like this system so much, in fact, this is the most popular and reliable system for all families, and it also works great in ca, az fl...
Thanks to the intelligent controller and circulation pump, which help the system runs automatically, it is so easy to use, you will find it's a good assistant.
Model number collector model collector absorber area tank capacity(l/gal)
Sfct-01-150-15 scm15-58/1800 1 pc 1.92 m2(20.67 ft2) 150/40
Sfct-01-150-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 150/40
Sfct-01-200-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 200/50
Sfct-01-300-30 scm15-58/1800 2 pc 3.84 m2(41.33 ft2) 300/80
Sfct-01-300-40 scm20-58/1800 2 pc 5.14 m2(55.33 ft2) 300/80
Sfct-01-500-60 scm20-58/1800 3 pc 7.71 m2(82.99 ft2) 500/130




17- 33 sets in 20' gp

Sfct, split pressurized system for residential
A solar water heating system includes three parts, it is collector, water tank and pump station.
This system can do more than just producing hot water, in winter, it can also be used in a space heating system. Homeowners in ny, nj, mi and all northern states like this system so much, in fact, this is the most popular and reliable system for all families, and it also works great in ca, az fl...
Thanks to the intelligent controller and circulation pump, which help the system runs automatically, it is so easy to use, you will find it's a good assistant.
Model number collector model collector absorber area tank capacity(l/gal)
Sfct-01-150-15 scm15-58/1800 1 pc 1.92 m2(20.67 ft2) 150/40
Sfct-01-150-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 150/40
Sfct-01-200-20 scm20-58/1800 1 pc 2.57 m2(27.66 ft2) 200/50
Sfct-01-300-30 scm15-58/1800 2 pc 3.84 m2(41.33 ft2) 300/80
Sfct-01-300-40 scm20-58/1800 2 pc 5.14 m2(55.33 ft2) 300/80
Sfct-01-500-60 scm20-58/1800 3 pc 7.71 m2(82.99 ft2) 500/130




17- 33 sets in 20' gp