Mainly applied to vehicles (drive) type: Dongfeng Cummins 6CT, 6CTA, 6TCTA8.3, 6BT, on the 6114 diesel engine and all kinds of variations of the model.
Structural characteristics: mechanical drive, plunger-type structure
Caution:
1, the installation of size, and part of the joint drive as a whole must meet the requirements;
2, to ensure that clean diesel, in order to avoid plunger, the card-issuing valve so that the performance failure;
3, When the piston, valve or issuing an early reduction in fuel pump should be cleaned.
Our benefits: we are manufacturer, we can provide you the high quality products but with very competitive price.
Possessing advanced techniques, production and inspection equipmentand high ability to design, develop, produce, and please to manufacture products according to your samples and draught
Concrete transfer pump, also known as concrete pump, consists of pump body and delivery pipe. It is a kind of machinery that uses pressure to transport concrete continuously along the pipeline, and is mainly used in housing construction, bridge and tunnel construction. It is mainly divided into gate valve concrete transfer pump and S valve concrete transfer pump. Another is the pump body mounted on the car chassis, and then equipped with retractable or flexural fabric rod, and the composition of the pump truck.
To transfer the extract from storage tank to evaporator balance tank in Herbal and Solvent Extraction Plants. To transfer the liquid and process the liquid from one to other vessel in Pharmaceutical Plants and Chemical Plants.
Submersible sewage pumps are submersible sewage pumps that are particularly suitable for transferring liquids containing hard solids, fibrous materials, and particularly dirty, sticky and slippery liquids. There are two types: AS and AV submersible sewage pumps.
QW submersible sewage pump is a kind of pressure pump with large flow channel anti-clogging hydraulic parts design, which greatly improves the dirt passing ability.
1, before commissioning must ensure that the pump and pipeline full of water, so as not to damage the pump.
2, the pump is filled with water to open the pump bleeder valve for exhaust, so as not to cause unstable pipeline pressure can not be normal pressure regulation.
3, the cabinet door on the surface of the manual stop automatic transfer switch, hit the manual for the frequency start, automatic inverter start by the outlet pipe remote pressure gauge according to the set pressure automatic control.
4, due to manual and automatic power supply into the line is not the same, so the manual and automatic pumps are not the same, all pumps to work manually are adjusted to the positive, automatic reversal of the frequency converter output on the U2, V2, W2, any two-phase switching can be.
5, set the pressure to stop the pump (i.e., the maximum pressure) just press (ENTER) on the inverter panel into the display (REF) and then press (ENTER) into the display of 40% (i.e., 0.4MPa pressure), such as the need to increase and decrease the pressure according to the (Increase key) or (Decrease key) to set the required pressure value (i.e., the pressure stop the pump), set the value of the pressure and then press (ENTER) to save, then the After setting the pressure value, press (ENTER) to save it, and then press (EXIT) to return to the main interface to complete the setting; the pump pressure is based on the highest pressure to be converted by itself without setting.
A&S Fuel Injection System Company is a global proffesional supplier of fuel pumps, these pumps are widely applied in a variety of power equipment, including diesel engine, marine application, vehicle, generator set, air compressor, etc.
Part Name:� Bosch Fuel Pump for CUMMINS ISLe 9.5 INJECTION PUMP
Part Number: 4954200, 3973228, 5594766
Engine Series: Cummins Engine ISLe9.5, QSL9.3
QSX15 Engine is fixed on the equipment as below:
Terex Mining Truck
LIUGONG Excavator
ZOOMLION Rotary Drilling Rig
XCMG Rotary Drilling Rig
SUNWORD� Rotary Drilling Rig
Wirtgen� Asphalt Milling Machine
KEESTRACK� Milling Machine
HYUNDAI� Excavator
The rocker arm work with the camshaft to open or close the valve,
� so as to finish to exhaust.
Cummins engine is make up with engine cylinder block, two major mechanisms (crank and connecting rod mechanism, valve mechanism), and four major systems (fuel supply system, lubrication system, cooling system, and starting system).
The engine block is the frame of the engine, which is composed of a cylinder block and a crankcase. The crank connecting rod mechanism is composed of piston connecting rod group, crankshaft flywheel group and other parts. The valve train is composed of a valve group, a valve drive group, and a valve drive group. The fuel supply system includes a fuel supply device, an air supply device, a mixture forming device and an exhaust gas discharge device. The lubrication system consists of an oil supply device and a filter device. Cooling system includes radiator, water pump, fan, etc.Ã?Â
Which cummins series engine parts we are supplying:� NTA855, KTA19, KTA38, KTA50, QSM11, QSL9, QSB7, QSB6.7, QSX15, QSF2.8, QSF3.8, ISF2.8, ISF3.8, QSC8.3, B5.9, B4.5, B3.3, B3.9...
Price: Negotiate a price. Promise the most reasonable price on the whole internet, Ã? large favorably.Ã?Â
Qualityï¼?� Quality assurance, quality service.� We have a professional technical team 24h at your service. If you have problems with your cummins engine, please contact us freely, we must provide you with online help.
Delivery time:� Sufficient inventory,
Regular parts, shipped within 1-3 day,
Infrequent parts, delivery date depends on the order quantity.
Receiving precautionsï¼?� Before signing for receipt, please confirm that the accessory packaging is intact and then sign for receipt. If you find that the quantity is missing during the inspection, or the accessories are damaged, you can refuse to sign for it, meanwhile, please contact us.
