Membrane Pleated Filter Cartridge

Pall Ultipleat Replacement
Filter Media: PP Melt blown,Pleated glass fiber,Pleated depth PP
Length: 20"(508 mm),40"(1016 mm),60"(1524 mm)
Outside Diameter: 6 inch (152 mm)
Filtration Rating: 1m,4.5m,6m,10m,20m,40m,70m,100m
Support/Drainage: Polypropylene (PP)
End Cap Material: Glass fiber reinforced Polypropylene (PP)
Seal Material: EPDM,NBR

Features:
1.Hongtek use outside pp plastic frame for longer service life, can bear higher pressure than original Pall Ultipleat filter use outer hard netting.
2.Beta Rating can reach 5000 (99.98% efficiency) & Highest flow rate 110 m³/h
3.Unique crescent shaped pleated geometry, combined with its large 152 mm /6in diameter, reduces the number of filters and size of housing required.
4.Absolute rated filter medium for reproducible performance.
5.Out-to-in filtration constriction of mass flow pleated cartridges ensure holding all impurities stay inside the filter

Pall Ultipleat Replacement
Filter Media: PP Melt blown,Pleated glass fiber,Pleated depth PP
Length: 20"(508 mm),40"(1016 mm),60"(1524 mm)
Outside Diameter: 6 inch (152 mm)
Filtration Rating: 1¼m,4.5¼m,6¼m,10¼m,20¼m,40¼m,70¼m,100¼m
Support/Drainage: Polypropylene (PP)
End Cap Material: Glass fiber reinforced Polypropylene (PP)
Seal Material: EPDM,NBR

Features:
1.Hongtek use outside pp plastic frame for longer service life, can bear higher pressure than original Pall Ultipleat filter use outer hard netting.
2.Beta Rating can reach 5000 (99.98% efficiency) & Highest flow rate 110 m³/h
3.Unique crescent shaped pleated geometry, combined with its large 152 mm /6in diameter, reduces the number of filters and size of housing required.
4.Absolute rated filter medium for reproducible performance.
5.Out-to-in filtration constriction of mass flow pleated cartridges ensure holding all impurities stay inside the filter

Hollow fiber UF filter cartridge

Item
UF-8040

Module size(mm)
Dia.ª¦201

Length 1016

Fiber materials
Polypropylene-PP Polyethylen-PE

Shell materials
UPVC

Fiber dimesions
OD. 0.5mm/ ID. 0.4mm

Fiber filtration model
External force (Outside-In filtration)

Fiber membrane area(¬O)
80.5

MWCO(Daltons)
10000-100000

Initial flux(t/h)
í¦7.0

Tab/Well water designed flux(t/h)
2.5-3.0

Surface water designed flux(t/h)
2.0-2.51

Grey/Waste water designed flux(t/h)
1.8-2.0

Feed turbidity required
<100NTU

Filtrate SDI
<2

Filtrate turbidity
<0.2NTU

TOC removal rate
5-40%

Removal>0.2um particles
100% Under MWCO 80000 dalton

Coliform removal
Not found in each 100ml water sample

Bacteria removal
Not found in each 100ml water sample

MAX.feed pressure
0.3Mpa

MAX.pressure drop
0.2Mpa

Recommendatory pressure
0.06-0.15Mpa

Operating temperature
5-45íµ

PH range
1-14

Operating model
End flow or cross flow

Bag filter housing

Model A
(mm) B
(mm) C
(mm) D
(mm) E
(mm) F
(mm) H
(mm) K
(mm) NO.Bags M3/H
400-2F 1346 1092 254 584 108 400 362 516 2 60
450-2F 1397 1143 292 660 120 450 362 516 2 60
500-3F 1575 1143 343 686 120 500 432 567 3 90
500-4F 1575 1143 343 686 120 500 432 567 4 120
550-4F 1580 1160 360 736 150 550 494 704 4 120
550-5F 1580 1160 360 736 150 550 494 704 5 150
600-4F 1626 1226 356 876 150 600 520 750 4 120
600-5F 1626 1226 356 876 150 600 520 750 5 150
650-5F 1750 1320 356 876 150 650 494 704 5 150
650-6F 1750 1320 356 876 150 650 494 704 6 180
700-6F 1780 1360 356 876 150 700 520 750 6 180
700-7F 1780 1360 356 876 150 700 520 750 7 210
750-8F 1880 1430 480 1050 200 750 672 960 8 240
800-9F 1900 1450 480 1050 200 800 710 1010 9 270
900-10F 2007 1510 533 1219 216 900 813 1163 10 300
1000-12F 2050

Polypropylene pleated filter is the product for large flow having maximum filtration area due to its continuous pleated structure, and not only has long service life by the precision filtration performance (more than 90%) and low differential pressure, but also does not have breakaway of the filter materials and matter erupted by making out perfect structure to prevent solution leak with structural stability through heat sealing.


Inner diameter:28mm
Outer diameter:70/83/130mm
Length:10"/20"/30"/40"

Description

The large diameter geometrical design of polypropylene pleated high flow filter cartridges enlarge surface filtration area, high dirt holding capacity to save the quantities of filter cartridges, high flow rate when filtration efficiency exceed 99%. high flow filter cartridges are wide range of chemical compatibility and applications, the ideal option for industrial high flow water filtration system to protect RO membrane.

Feature
1. Gradient pore structure of high flow filter cartridges provide layered filter function
2. Outer hard cage can withstand higher pressure than Pall Ultipleat high flow filters made by soft netting
3. High flow filter cartridges are high filtration efficiency, lower waste disposal costs and more economical
4. Inside to outside filtration pattern of high flow filters ensure holding all impurities stay inside the pleated media
5. The highest flow rate of high flow filters could get 110 M3/H and Beta 5000 rated (99.98% efficiency)
6. The reduction of filtration system space maximum 50% and lower maintenance costs when use high flow filters
7. Materials meet FDA requirements, wide chemical compatibility, no resins, binders, or adhesives and 100% integrity testing

Application
1.Paints and coatings
2. Microelectronic, film and resin
3. Water treatment in Power generation
4. RO Pre filtration and sea water desalination
5. Solvents, API and water filtration in Bio field
6. Bottled water, high fructose, edible oil, soft drink and milk