Properties
1. Its dosage lower than aluminum sulfate (based on Al2O3) and water treatment cost is lower than other inorganic flocculants.
2. The product can cause quick formation of flocs, big flocs formation and rapid precipitation. Its treatment capacity is 1.3-3.0 times of other inorganic flocculants.
3. It enjoys wide-range adaptability for different-temperature source water and a good solubility.
4. It is slightly corrosive and easy for operation.
5. The liquid product is suitable for automatic dosing. Furthermore, it will not block pipes over long-time Usage.
GRADES
PAC LS 01,White or pale yellow powder, spray dryer type, for dinking water, high purity raw water treatment , sizing agent for paper making.
PAC LS 02, light yellow powder, spray dryer type, high Sulphate content, for drinking water, high purity raw water treatment.
PAC LS 03, Yellow powder, spray dryer type, for drinking water treatment or waster water treatment.
PAC LD 01,yellow or brown powder, drum dryer type, for drinking water treatment.
PAC LD 02,Yellow powder, drum dryer type, for drinking water treatment or wastewater treatment.
PAC LD 03, Yellow powder, drum dryer type, formulated with cationic polymer, for treatment of high turbidity drinking water, raw water and waster water treatment.
PAC PAFC, Yellow or brown powder, drum dryer type, high Fe content (1.0-3.0%),for drinking water treatment or waster water treatment.
APPLICATION METHODS
1. The liquid product can be dosed directly or dosed after dilution. As for the solid product, dilution is necessary before being dosed. Water amount for dilution shall be determined based on the amount of the chemical to be dosed and the quality of water to be treated. Dilution proportion for solid product is 2%-20%, and for liquid product, 5%-50%(based on weight percentage).
2. The dosage of the liquid product is 3-40g/MT and the dosage of the solid product is 1-15g/MT. The specific dosage is based on the flocculation test and on the trial.
3. Its acidity is lower than other inorganic coagulants.
PACKAGE AND STORAGE
1. The solid product is packaged in 25kg polypropylene woven bagswith inner plastics bags.
2. The liquid product can be stored for one year without losing its effect, while the solid product, for two years. The product should be stored in a dry and ventilative room, but the effect will not be affected even if it gets wet.
Supplier: Atatic polypropylene (app), poly aluminium choride (pac)
Buyer: Atatic polypropylene ( app ), poly aluminium choride ( pac )
Supplier: Activated Carbon, Aluminium Hydroxide, Aluminium Sulphate, Calcium Hypochlorite, Caustic Soda, Cetyl Stearyl Alcohol, Citric Acid, Cocoa Powder, Corn/Maize Starch, Corrosion Inhibitor, Dextrose Monohydrate, Ferric Chloride, Ferro/Silico Manganese, Glacial Acetic Acid, Glycerin, Hydrated Lime, Liquid Chlorine Gas, MIBC, Phosphoric Acid 85%, PAC, Poly Vinyl Acetate, Polyelectrolyte, Polymer, Refined Glycerine, Soap Noodles, Soda Ash, Sodium Sulphate, Soya Lecithin, Sulphur Granular, Sulphuric Acid 98%, Talofloc, Taloflot, Titanium Dioxide, Urea Formaldehyde Resins, Xanthate. Beans, Chickpeas, Lentils, Maize, Millet, Pulses, Rice, Sesame Seeds, Sorghum, Soya Meal, Turmeric. Motors, Aluminium/Copper Wire Rods, Automation & PLC, Cable Accessories, CR/HR/Galvanized Steel, Conveyor Belts, Energy Meters, Generators, BESS Tenders, HMS/LMS Scrap, Industrial/Mining Equipment, Perforated/Structural Steel, Pumps, Sensors, Steel Coils/Pipes/Sheets, Transformers, Water Meters, Wires & Cables.
