Straight Centrifugal Grinder(Vipeak)

High pressure suspension grinder

Key words: high pressure suspension grinder, high pressure medium speed grinder, high pressure suspension mill, pulverizer, pulverizing machine, grinding mill, grinder, grinder mill

(high pressure suspension mill)high pressure suspension mills are used to grind barite, limestone, kaolin, and ceramics and slag, whose moh's hardness is below 9.3 scales, non-inflammable and non-explosive material.

Features:
1) our patent product
2) product size is adjustable in the range of 80 - 425 meshes
3) better design which reduces cost

Models available:
1) ygm75 high pressure suspension grinder mill
A) number of roller: 3
B) diameter of roller: 260mm
C) height of roller: 150mm
D) inside diameter of ring: 780mm
E) height of ring: 150mm
F) max. Feeding size: 15mm
G) fineness of product: 0.613 - 0.033mm
H) capacity: 0.28 - 3.0mt
2) ygm85 high pressure suspension grinder mill
A) number of roller: 3
B) diameter of roller: 270mm
C) height of roller: 140mm
D) inside diameter of ring: 830mm
E) height of ring: 140mm
F) max. Feeding size: 20mm
G) fineness of product: 0.613 - 0.033mm
H) capacity: 0.35 - 3.4mt
I) dimensions: 5, 300 x 4, 100 x 5, 200mm

Gravel ultrafine grinding line
Our gravel grinding mills include Raymond mill, HGM ultrafine grinding mill (HGM80/ HGM90/ HGM100/ HGM100/HGM125). Raymond mill is the vertical grinding mill, which is popular in many countries and has very long history. HGM ultrafine grinding mill is special for super thin grinding. You can choose suitable gravel grinding mill depends on your gravel size, hardness, capacity and your cost budget.
Gravel ultrafine grinding line:
Clirik has the best gravel ultrafine grinding line. Under the same finished final size and the same motor power, the capacity of micro powder grinding mill is twice as much as jet mill, mixing grinder and ball mill. And the application of pulse deduster and muffler greatly alleviates dust pollution and noise. If you want to reduce the cost of production you can choose our gravel ultrafine grinding mill.
Raw gravel first enters jaw crusher to be crushed to smaller size. They are lift to storage room by elevator. Vibrating feeder will feed materials into grinding chamber evenly and gradually. After being grinded, the quartz powder will be blow to cyclone by blower. Then the gravel powder will be transferred to storage room through pipes, and then will be discharged as final products.
The Application of gravel ultrafine powder grinding mill:
HGM series gravel ultrafine powder grinding mill is mainly applied to non-inflammable, non-explosive and brittle materials with Moh hardness under six. Such as calcite, chalk, gravel, dolomite, kaolin, gypsum, etc, totally more than 100 kinds of materials. Product fineness can be controlled between 325~2500 mesh.
Working Principle of gravel ultrafine powder grinding mill:
The main bearing and each dial are driven by electromotor of main machine through reducer, and numbers of rollers, which are rolling in the ring, are driven by dial through plunger. After crushed by hammer crusher, the big materials become small ones and are sent to storage hopper by elevator and further sent to the middle of first dial evenly by the electromagnetic vibrating feeder and feeding pipe. The materials will be driven to the edge of dial by centrifugal force and fall down into the ring, crushed and grinded by roller, and become powder after production of three rings. The high pressure centrifugal blower will inhale air from outside and blow the crushed materials to classifier. The rotating turbo in the powder concentrator will make the coarse powder materials return to the mill and reground, while the fineness will mix with the air and go into the cyclone and be discharged in the discharge bin, which is at the bottom of it. The air, which mixed with very little fineness, will be purified by impulse duster and discharged by blower and muffler.
Performance and features of gravel ultrafine powder grinding mill:
1. High efficiency
Under the same final size and power, the product capacity of ultrafine mill is twice than jet mill and agitation mill.
2. Longer lifetime of spare parts
The roller and ring are made of special material, which improve the grinding efficiency a lot. For same material and final size, the lifetime of its wearing parts can reach to more than one year, about 2-5 times as long as that of vertical shaft impact crusher and turbo-mill. Especially when handling calcium carbonate and calcite, the lifetime can reach 2-5 years.
3. High safety and reliability:
There are no rolling bearings and bolts in grinding cavity, so problems caused by bolts shedding or wear of bearings and seal components will never happen.
4. High fineness of products
The product fineness can reach D97=<5um.
5. Environment friendly
The application of pulse dust collector and muffler reduce the pollution and noise of the dust, which has reached national environment protection standard.
Should you have any questions, please do not hesitate to contact us:

We Ultra Febtech - An ISO 9001:2008 Certified Company Engaged in Manufacturing of Guar Gum Plant Machinery to Convey the Material.The plant has been configured and designed in such a way that minimum work force will require. The guar split will be fed in to the pneumatic system to feed in to the turbo screen. The turbo screen is suggested at the high of plant. The screening will be employed for the removal of foreign matter. This screened material will be stored in a storage hopper. The guar splits will fall from the screens by gravity to the storage hopper, which is configured below the screen. From storage hopper material can be taken in to double cone mixer as and when required by gravity for the rehydrating of guar splits.
All the rehydrated guar split will be sent to the hopper of Flakers at a time by gravity. Flakers will crush the guar splits and crushed guar splits will go into the ultrafine grinder at the uniform rate.

Ultrafine grinder is proposed for the grinding of crushed guar splits. This grinder has ability to grind the material without generating too much heat. Material will be fed into the dryer. Oil will be the media to convey the heat and deliver to the air. This hot air will take the material into the dryer line where actual drying will take place. Attached cyclone system will separate the material and hot air. To heat the oil Thermal boiler will be used.

The material will be screened through centrifugal screen. Material passing through the screen will be again screened through turbo screens as additional control. This material will be sold as a premium product. Oversize of the centrifugal screen will be screened through turbo screen to separate another grade in terms of particle size followed by additional screening. The oversize will be screened through another turbo screen to separate another grade. Oversize will be passed through another grinder. The material will be passed through another screen. Oversize will be recycled to the same grinder.
Final material coming out from all the screens will be sent separately by gravity in to the Nauta mixer for the blending and to make a uniform lot. The products will be tested and packed.
The plant can be operated by 2 skill workers in a shift. The loading/unloading and the packing of the final product can be done on contract basis.

The plant has been configured and designed in such a way that minimum work force will require. The guar split will be fed in to the pneumatic system to feed in to the turbo screen. The turbo screen is suggested at the high of plant. The screening will be employed for the removal of foreign matter. This screened material will be stored in a storage hopper. The guar splits will fall from the screens by gravity to the storage hopper, which is configured below the screen. From storage hopper material can be taken in to double cone mixer as and when required by gravity for the rehydrating of guar splits.
All the rehydrated guar split will be sent to the hopper of Flakers at a time by gravity. Flakers will crush the guar splits and crushed guar splits will go into the ultrafine grinder at the uniform rate.

Ultrafine grinder is proposed for the grinding of crushed guar splits. This grinder has ability to grind the material without generating too much heat. Material will be fed into the dryer. Oil will be the media to convey the heat and deliver to the air. This hot air will take the material into the dryer line where actual drying will take place. Attached cyclone system will separate the material and hot air. To heat the oil Thermal boiler will be used.

The material will be screened through centrifugal screen. Material passing through the screen will be again screened through turbo screens as additional control. This material will be sold as a premium product. Oversize of the centrifugal screen will be screened through turbo screen to separate another grade in terms of particle size followed by additional screening. The oversize will be screened through another turbo screen to separate another grade. Oversize will be passed through another grinder. The material will be passed through another screen. Oversize will be recycled to the same grinder.
Final material coming out from all the screens will be sent separately by gravity in to the Nauta mixer for the blending and to make a uniform lot. The products will be tested and packed.
The plant can be operated by 2 skill workers in a shift. The loading/unloading and the packing of the final product can be done on contract basis.

Brief introduction and working principles:
The crusher/grinder is composed of feed hopper, upper and lower body, rotor, screen, fan, conveying pipe, etc. The user can equip the storage bag or bin according to their own needs. After entering the crushing chamber from the feed hopper, the materials are crushed by the impact of the high-speed rotating hammer.
Driven by the air flow, the crushed materials are continuously impacted, collided and rubbed with the hammer, toothed plate and sieve plate along the outer edge of the rotor, and are rapidly crushed.
Because of the centrifugal pressure of the rotor and the suction force of the fan, the crushed powder is quickly transported to the storage bag or storage bin through the mesh.

What is extra-virgin olive oil?

Extra Virgin Olive Oil (EVOO) is the natural oil that is produced when quality olives that have been picked straight off the tree are processed, as soon as possible, without the use of chemicals or excessive heat.

The extra virgin olive oil that is produced in this manner is clean and healthful exactly as nature intended and not adulterated or added to in any way. The oil has not been treated other than through washing, centrifuging and filtering.

Olive Groves of Extra Virgin Olive Oil
It is an all-natural food.

Advantages in Manufacturing and Extracting Olive Oil:
Very low fresh water consumption and a small amount of resulting wastewater
First-class oil quality and a high yield of raw materials
Low use of personnel because of continuous and automatic operation
Low energy and process costs
Long service life of the machines and comparatively low maintenance requirements

According to the product characteristics and production process, the main steps of the process design are: (1) defolate, (2) washing, (3) crushing, (4) fusion, (5) decantation, (6) separation, (7) ) storage, (8) filling and packing