Automatic Section Cutter

The polyester staple fiber machine (PSF plant) takes virgin PET Chips, recycled Bottle Flakes, Popcorn and Lumps, etc., as raw material, with continuous drying (or batch drying through Vacuum Dryer), high pressure melt spinning process engineering and VFD controlled Spinning & Stretching process engineering to produce normal Staple Fibre, High Tenacity Low Elongation Staple Fibre and Hollow Fibre. Single plant capacity is 15T.P.D. to 80T.P.D.
Equipment Technical Data
Titer Range dtex 6.67-16.67
Spinning Pos. nos. 6-24
Spinning Pitch mm 700, 750
Plant Capacity TPD 15-80
Spinneret dia. mm 328, 358, 410
Spinning Mechanical Speed m/min 500-1,500
Spinning Processing Speed m/min 500-1,300
Stretching Mechanical Speed m/min 240
Stretching Processing Speed m/min 230
Total Tow Titer at Stretching dtex 600,000-3,000,000
Stuffer Box Width mm 160-410
Cutting Length mm 25, 32, 38, 44, 51, 64, 76, 101
Bale Weight kg 200-350
Application:
Cushions Pillows Quilts Toys Jacket Mattress Non woven carpet Automotive felts, speaker felts, geo textiles, polyfill wadding, filter fabrics and other acoustics as well.

Spinning Line: Continuous Dryer Hopper Screw Extruder Polymer Pipe Filter Spin Beam (Meter Pump System, Spin Pack, Spinneret) Quenching Unit Interfloor Duct Draw-off Wall Capstan Roller Sunflower Gearing Unit Automatic Fiber Can Device

Drawing line: Can Creel Inlet Thread Guide Tow Guide Stand Dipping Bath 1st Draw Stand Draw Bath 2nd Draw Stand Draw Steam Chest 3rd Draw Stand Tow Stacker Crimper Steam Box Crimper Silicone Oil Sprayer Machine Tow Tension Stand Cutter Fiber Spreading Machine Relaxer Fiber Blowing system Baling Press

12 " cutter section dredger
LOA - 24.5 M
Breadth - 5.2 M
Dredge depth - 8 M @ 37 deg
Main engine Cummins - 28 G ( 500 KW)
Main engine power - 666 HP @ 1800 rpm
Dredge pump - India made @ Daman pumps - 300 mm (sucton )
Pump output - 120 cubic meters solids/hr

12 " cutter section dredger
LOA - 24.5 M
Breadth - 5.2 M
Dredge depth - 8 M @ 37 deg
Main engine Cummins - 28 G ( 500 KW)
Main engine power - 666 HP @ 1800 rpm
Dredge pump - India made @ Daman pumps - 300 mm (sucton )
Pump output - 120 cubic meters solids/hr

Cycloid pin gear decelerates, gear end does not heat up, it is driven by the gear mechanism
2Functions of PLC control, many times of material feeding, automatic stopping at preset times
3 Floating feeding system that protects the workpiece from being damaged
4 It is able to classify scrap iron from the workpiece automatically, it also can be equipped with servo motor, this brings high precisionï¼?
5Short residual material, it is able to cut mutti pieces at one time

Automatic Precision Paper Tube Cutting Machine 
This machine is automatic tube cutting machine. It is used for cutting l paper tube into required length without changing tube shaft. It is equipped with PLC, servo motor, THK high speed screw and THK linear guide rail. 1 set less than 100mm diameter mold is with machine.

2. Technical parameter:
Model SAN-A
Tube inner diameter 30-250mm, 40-420mm
Tube Length 10-2000mm
Tube Thickness 0.8-20mm
Blade 2pcs
Speed 50times/min
Power  7.5KW/380V/50Hz
Weight ~1.2T
Dimension 4000mmX1000mmX1500mm

Automatic platen die-cutter

Brief description
Easy, quick and reliable setup
Heavy-duty mechanical structure capable of stripping 6, 500 sheets per hour
Smoothly treat even the irregular twisted and warped sheet
Characteristics & features
1. Heavy-duty and precise mechanical structure of production speed 6, 500 sheets per hour
2. Easy, quick and reliable setup without complex installation or configuration procedures.
Quick and easy change of the chase and convenient mounting of the die-board.
3. Even the unskilled operator can control the machine easily
4. Efficiency of occupation space requirements
5. Easy check and simultaneous control throughout the progress of operation
6. Creating high efficiency through precise and express processing
7. Silent running minimizing the electric shock and noise



Bm-1060st
Maximum sheet size 740 x 1, 060 mm
Minimum sheet size 340 x 450 mm
Nwt 15 ton

Gx-701-1 single-shaft automatic cutter

Uasge for cutting various types of adhesive tape
Feature: 1. High-automic, controlled by computer program·+it adopts 7" touch control panel, inputting the opearation by touching the panel, like talk with the machine.
2. Dropping cooling system
3. The cutter orientation is very accurate and the error rangef_f+0.1mm
4. The product rollerf+s end face is very flattening without the phenomenon of convexo or concave, the error range of the productf+s inside diameter and the outside diameterf_f+0.1mm

Standard lot size:
Weight:
Dimensions

Features of the Stone Machine:
1, Multi-blade Stone Cutting Machine
2,Cutting granite/marble/limestone block into slabs
3, Cutting with 1-10 pieces at the same time.
4, Giving each uniform thickness.
5,Spindle Motor:37-45kw
6,Max.Cutting Depth:950-1250 mm
7,Max.Cutting Length:3000-3600mm
8,Max. Cutting Width:2200mm
9,Logiverty: at least 15 years
10,Warranty: one year



Description of the Stone Cutting Machine
The multiblade blade stone block cutting machine is controlled by microcomputer and cuts stone automatically. It is able to cut big blocks into slabs with 4-12 blades. The long strong crossbeam of the block cutting machine is made of iron cast which provide excellent balance and ensure uniform thickness of each slab. The blade moves along with the crossbeam within left/right and up/down. Its movement (up/down) controlled by hydraulic system. the crossbeam moves forward and backward along with side beams. The multiblade stone block cutting machine cuts granite very efficiently. Working video on: There are four different models of the cutting machine which meet different production needs as well as covering wide budget. The four cutting machines mainly differ in max. cutting length and thickness. DQ2200A and DQ2200B are suitable for cutting the block as depth as 950mm, while 1100mm for DQ2500 and 1250mm for DQ2800. DQ2200A has the longest cutting length-3600mm. Then comes to DQ2500, its max. cutting length is 3300mm . The PLC controlled stone block cutting machine which is featured by precise cutting, stable performance and easy operation has won trust and reputation from our customers.

HWN-220

Focuses on compact design and high precision
Intuitive LCD panel for easy operation
30% more efficient than traditional models
Handles AWG16 to AWG32 wires
Adjustable cutting speed (0-9 levels)
Three-section stripping capability
Technical Specifications:
Dimensions: 450x450x360mm
Net Weight: 40kg
Cutting Length: 0.1-9900mm
Stripping Length: Front: 0.1-30mm, Rear: 0.1-50mm (material dependent)
Twisting Length: Front: 0.1-30mm, Rear: 0.1-50mm (material dependent)
Wire Diameter: AWG16-AWG32
Cutting Error: 0.2mm+Lx0.2%
Voltage: AC 110V-220V (50/60Hz)
Power: 20W (idle), 220W (max)
HWN-220+T

No additional information provided about the "+T" feature compared to the HWN-220.
It might be a taller version (dimensions: 450x720x360mm) and potentially heavier (net weight: 60kg) based on the provided specifications.
Without further details, it's difficult to determine the specific functionalities of the "+T" feature.