Teaching Meter

Function Measuring Range Accuracy
DC Voltage 200mV-500V +/-(0.5%+2dgt)
AC Voltage 200V-500V +/-(1.2%+10dgt)
DC Current 200uA-10A +/-(1%+2dgt)
Resistance 200-20MOHM +/-(0.8%+2dgt)
Battery Test 1.5V/9V/12V +/-(2.5%+2dgt)
Diode Test YES
Data Hold YES
Low Battery Indication YES
Back Light YES
Input Impedance 10MOHM
LCD Size 48*16mm
Power Supply 9V Battery (6F22)
Max. Display 1999
Dimensions 130*73.5*35mm
Product Net Weight 156g
Standard Accessories Test Leads, Battery, Manual

Sensitivity: (25 cents (USD)) 60mm; (Iron pipe-tube) 120mm
Operating current: <20mA
Operation Condition: -10~50 ípC below 75% RH.
Battery: 9V (6F22)*1
Dimension: ª¦135mm
Weight: 230g (including battery)

Model 5050T/1010T Resistance Meter
The Model 5050T/1010T is applicable for measuring insulating resistance of electronic motor cable, voltage transformers, domestic electronic facilities etc.
Model Measuring range
5050T 0~500
1010T 0~1000
Dimensions 205*120*145mm

Range:-50_1200 degree celsius
Accuracy: +/-3%
Low Battery Indication: YES
Overload Protection: YES
Power Supply: 6F22,9V
Max. Display:1999
Dimensions: 105*70*20mm
Standard Accessories: Test Leads, Battery, Manual, Thermocouple wire

Function Measuring Range Accuracy
DC Voltage 600V +/-1.0%
AC Voltage 450V +/-1.2%
AC Current 20-200-400A +/-2.0%
Resistance 200KOHM +/-1.0%
Diode Test YES
Data hold YES
Buzzer YES
Power Supply (AAA)1.5*2
Max. Display 1999
Dimensions 150*63*28mm
Weight 160g
Standard Accessories Test Leads, Manual.

What Is Servo Voltage Stabilizer

The Servo voltage stabilizer maintains the quantity of voltage in the power system, even in the case of voltage fluctuations. The control element basically converts the unregulated input to the regulated output.

GENERAL SPECIFICATION

The product range offered by us is inclusive of Servo Stabilizers, Electronics Plating Rectifiers and Electronics Rectifiers. Their longer serving life, compact design, less power consumption, easy operation and low working cost, makes these machines highly appreciated among our patrons. The offered range finds wide applications in various commercial, industrial and household applications. Offered by us at industry leading prices, these electronic and allied machines and equipment are highly appreciated among our patrons. We are Best manufacturer of Servo Voltage Stabilizer and Rectifier.

Rating: Up to 5000 KVA

Feature

1) There is high speed chip controller as brain behind the control board, 20x4 LCD to display instantaneous electrical parameter

2) Self teaching type Front panel for parameter setting

3) Smart and Intelligent to control overload based system

4) User settable Output voltage Upper and Lower voltage cutoff based on output set value

5) There is Individual message for each fault.

6) Single board for control and conditioning

7) For alarm On board buzzer

8) User settable Buzzer control

9) Very simple for wiring and maintenance

10) Fault history storage facility and can store No. of faults

11) System ON/OFF control through Front panel soft key for maintenance

12) Three phase separately can be controlled independently through single board In analog type servo voltage Regulator, it requires separate digital meter and overload facility is normally not provided All the settings are provided as factory setting, users have very less option to set.

Advantages & Benefits

1) Higher reliability and performance, easy for user

2) Easy to change output parameter as per customer need

3) System will not allow more than system power rating

4) Load will be always safe from the output over voltage

5) Very Easy to find out unhealthy status of servo or load. User can take preventive action based on this indication.

6) User will get buzzer for all kinds of faults to recognize system status without visualizing

7) Reduced wiring will increase reliability in the system, lesser probability of failure malfunction.

8) Very good feature of Digital controller, user will always be aware with load pe Conditioning. User himself can take preventive actions. This will reduce time to

9) This will provide correct information of how much maximum voltage and load c sustained by the System. From this preventive action can be taken for the load.