Low price and high reliability
105 output capacitor
Ac input power suitable for the world
Hight efficiency and low operation temperature
Soft-start current can reduce the ac input impact effecticly
With short-circuit and owwerload protection
Compact size, light weight
100% full-load burning test
Installed with emi filter, minimum wave
Mfrs. of Led Driver, Led Controller, SMPS Power Supplies for CCTV Camera / Security Systems, SwitchingPower Supplies, Battery Charger, DC/DC Converter, Transformer, Medical Power Supply, Switching Adaptors, Solar Products, E- Bike Charger, E. Rickshaw Charger, Car Inverter, UPS & Inverter, Cvt.
Load Change Over Switch ATS Power Switch for Generators
Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements.
RDS2 series Auto changeover switch mainly used for distribution or electromotor network under 50Hz, rated voltage 380V, rated DC voltage 220V, and rated current 16A to 3200A, change over between main power and backup power, mutual work as backup power system and city power and Generator power. At the same time, it can act as disconnector for the un-frequency ON and OFF circuit or lines.
Such product are widely used in the power transmission and distribution system and atomization system of important site which power off is not allowed, such as fire-fighting, hospital, bank, high buildings etc.
RDS2 Auto Transfer Switch Equipment (ATSE), is integrate the switch and logical control together, no need extra controller, is an electromechanical integration auto transfer switch, with voltage monitoring, frequency monitoring, communication port, electrical and mechanical interlock functions etc., can achieve auto control, remote motor control and emergency manual control.
Operation is achieve by logical control board with various logical commands to managing the motor, gear-box running, motor with spring energy storage, instant release accelerating mechanism, quickly open and close the circuit or make quick transferring, through visible status to make sure the safety isolation, greatly improved the every electrical and mechanical performance.
RDS2 ATS integral designed with metal case, compact and strong.
RDS2 ATS, the control part is with metal cover, switch part with DMC case, have strong dielectric performance, protection performance and reliable operation safety.
The switch suitable for auto transfer between main power and backup power system or two load equipment's auto transfer and safe isolation etc.
The switch has beautiful appearance, novelty, small size, complete functions, is the best choose among the similar products.
RDS2 series product have passed the EMC test.
Load Change Over Switch ATS Power Switch for Generators
Radin Electric provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements.
RDS2 series Auto changeover switch mainly used for distribution or electromotor network under 50Hz, rated voltage 380V, rated DC voltage 220V, and rated current 16A to 3200A, change over between main power and backup power, mutual work as backup power system and city power and Generator power. At the same time, it can act as disconnector for the un-frequency ON and OFF circuit or lines.
Such product are widely used in the power transmission and distribution system and atomization system of important site which power off is not allowed, such as fire-fighting, hospital, bank, high buildings etc.
RDS2 Auto Transfer Switch Equipment (ATSE), is integrate the switch and logical control together, no need extra controller, is an electromechanical integration auto transfer switch, with voltage monitoring, frequency monitoring, communication port, electrical and mechanical interlock functions etc., can achieve auto control, remote motor control and emergency manual control.
Operation is achieve by logical control board with various logical commands to managing the motor, gear-box running, motor with spring energy storage, instant release accelerating mechanism, quickly open and close the circuit or make quick transferring, through visible status to make sure the safety isolation, greatly improved the every electrical and mechanical performance.
RDS2 ATS integral designed with metal case, compact and strong.
RDS2 ATS, the control part is with metal cover, switch part with DMC case, have strong dielectric performance, protection performance and reliable operation safety.
The switch suitable for auto transfer between main power and backup power system or two load equipment's auto transfer and safe isolation etc.
The switch has beautiful appearance, novelty, small size, complete functions, is the best choose among the similar products.
RDS2 series product have passed the EMC test.
Deyang Dongfang Yoyik is a trade production company with many international brands. Our source is authentic, product is quality guaranteed, price is reasonable, welcomed by our new and old customers. We also sell all kinds of processing parts, non-standard parts for power plant dedicated.
YOYIK provides multiple types of spare parts and equipments for power plant :
#DF-PRESSURE SWITCH BPSN4KB25XFSP19-DF
OPC solenoid valve coil PAT5002253 130VDC 19W
thermocouple sensor TE-110
high pressure piston pump PVH74QIC-IS-10-C25-31
centrifugal pump suction YCZ50-250
pump coupling PVH74QIC-RSF-1S-10-C25-31
thermocouple k type WRNK2
OIL BAFFLE 3FK5F32M-06-04
Bearing NA5920-NTN
Counter Display CR0464 165
piston vacuum pump PVH074/PVH098/PVH131
glass mica tape 0.1*25mm
high pressure oil pump 50SDZ-45
M6 thread WRNK2-346
non-return valve S15A1/2
pump vacuum P-1758
thermocouple range TE-213
roots vacuum pump P-1825
k type thermocouple 1200c TE-205
one-way throttle valve DRV30-1-10/2
transfer pump fuel G25-1A1000single screw pump HSNH280-43N7
thermocouple thermometer WREK2-191
coupling XL3
screw pump stainless ACF080K41RBP
Thermocouple Cylindrical sensor TE-304
3 wire thermocouple TE-104
PRESSURE SWITCH BPSN4KB25XFSP19
Resistance Thermometers WRNK2-0901T �?5
mechanical seal 34 mm 15F4-IC-20
pressure gauge ABZMM63-400BAR/PSI-R/B-G
heater thermocouple WRNK2-191M
dongfang Nitrogen reducer YQD-II
thermocouple TE-303
Pt100 temperature probe WZPM2-001
axial piston pump PV29-2R5D-COO
thermocouple cable WRNK2-331T
radial piston pump PD060PC02SRS5AC00E1200000
high temperature thermocouple TC03A2-KY-2B/S15
Sealant MFZ-3Platinum Wire WH-5A421.575
dc screw pump ACF090N5ITBP
solenoid valve plug DG4V-3-2AL-VM
Thermocouple WRN2-0301T
rotary vane pump F3-SDV20-1P11P-1A
reciprocating piston pump PVH098R01AJ30A250000002001AB010
TC Sensor TE-105
hydraulic piston pump spare parts 50SDZLJ-40Ax1.3
thermocouple temperature sensor WRN-330
rotary vane pump F320V12A1C22R
furnace thermocouple WRNK2-321\8\K
Hot water Line valve actuator LR24A-SR
three screw pump 3GR30*4
mechanical seal pdf 104-45
mechanic seal water pump 104G-40
globe throttle check valve KJC25C-1.6P
screw pump working DLZB820-R67
thermocouple digital WRNK2-332
pressure regulating valve DB20-2-52/315E
thermocouple range TE-212
Solenoid valve 4WE10D50/EG220N9K4/M
twin screw pump DLZB820-R64A-8
Solenoid valve 8223G003\220VAC
PRESSURE SWITCH BPSN4KB25XFSP19
Radin Electric  provides ATS design, engineering, and full after sales support for a wide range of automatic transfer switch applications. We offer onsite electrical audits to assist in determining the correct product and installation to meet your exact needs and requirements.
Technical Specification
Model RDQ3-63
Working Voltage AC150-265V Â 50/60Hz
Operation Mode Auto and Manual
Transfer Mode Auto Transfer with Auto Recovery
Transfer time delay 0.2s Fixed / 0~30s adjustable
Rated Current 6A to 63A Â 3P and 4P
About ATS
RDQ3-63 is CB type dual power transfer switch,mainly apply to the two power systems with neutral line earthed and rated current below 63A, rated voltage 230V,50/60Hz, transfer between two power source when one power source fault,to ensure the power supply reliable and safety.
Product Structure
RDQ3-63 Series ATS usage category AC-33IB,electrical appliance grade CB class,its structure comprise with two MCB and accessories,mechanical interlock transmission mechanism,automatic controller,motor operation mechanism etc.Meanwhile the MCB inside the ATS have its original over load and short circuit protection function,can also used as ON/OFF and protection of the main circuit.
LIMIT SWITCH 802T-AP for Jojobera power
YOYIK knows that innovation is the core driving force of corporate development, so it continues to increase R&D investment and establish an advanced R&D center, focusing on improving product performance and efficiency, reducing energy consumption, and reducing environmental impact. The company has also carried out in-depth cooperation with many scientific research institutions and universities at home and abroad to jointly explore cutting-edge technologies in the power equipment industry and promote technological innovation in the industry.
Yoyik can offer many spare parts for power plants as below:
Experience seamless power transitions with the EATON ATC3C2X20200 transfer switch, designed for reliable and efficient operation in a variety of settings. With a robust 200A rated amperage, this switch is built to handle the demands of heavy-duty power generation systems. Crafted by the trusted brand EATON, this model is a testament to durability and quality in the realm of generators and power generation. The ATC3C2X20200 is engineered to provide a secure connection and easy switching between power sources, ensuring that your equipment remains powered and operational when you need it most.
