Traxxas Slayer Pro 4Wd Rtr Nitro

Features:

Chassis: 6061-T6 aluminum, .16" (4mm) thick, blue in color, heavy duty braces
Drive: Four wheel shaft driven with Revo spec driveline including sealed driveshafts, pivot balls and axle carrier
Wheelie Bar: 4 snap-in adjustment positions to control degree of wheelie action, easily removable if additional control isn't needed
Radio: Traxxas TQ 2.4GHz Direct Sequence Spread Spectrum (DSSS) programmable system with Traxxas Link automatic model recognition that allows up to 20 Traxxas Link receivers and transmitters to be bound, transmitter automatically recalls settings for any previously bound receiver
Engine: Traxxas .20 cu in (3.3cc) racing engine w/Slide Valve Carburetor, 12mm diameter IPS crankshaft, high volume dual stage air filter
Starter: EZ-Start electric starting system with Traxxas's exclusive Smart-Start technology that monitors critical starting functions, sensing and diagnosing potential problems for easy starting every time
Battery: Traxxas Power Cell Battery
Charger: AC powered
Exhaust: Maxx Resonator dyno tuned dual chamber polished tuned pipe Brake: Semi metallic, giant 1.6" (42mm) diameter Tires: 6.3" (160mm) outer diameter, 3.8" (96.5mm) inner diameter all terrain
Maxx Wheels: Hurricane chrome wheels 3.8" (96.5mm) diameter, 2.75" (70mm) wide, 14mm hex size
Transmission: Revo-Spec forward only two speed autoshifting with skid plate, optional reverse kit sold separately
Differential: Revo-Spec sealed front and rear
Ball Bearings: Full set, rubber sealed
Fuel Tank: 4.2oz (125cc)
Body: Trimmed and painted
Shocks: Eight oil-filled Ultra with rubber pressure badders and double O-ring seals, up to ten shock mounting positions, nearly 4" (102mm) travel
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Suspension: Sealed pivot ball WideMaxx independent
Steering: Heavy duty bellcrank steering with integrated servo saver
Skid Plates: Heavy-duty plastic, front and rear.

Includes: New T-Maxx RTR 3.3 truck, TRX 3.3 engine, EZ Start electric starter, EZ Start battery, charger, fuel bottle, extra glow plug, metric hex hardware, air filter, two decal sheets setup DVD, antenna tube, painted body, illustrated instruction manual and 2.4GHz radio system.

Features:

Chassis: Nylon composite construction
Drive: Four wheel with lightweight extruded aluminum shaft
Radio: Traxxas TQ 2.4GHz High Output Traxxas Link with mini receiver
Electronic Speed Control: Traxxas Velineon VXL 3S

Motor: Traxxas Velineon 3500 with ultra high temperature Neodymium magnets and high speed ball bearings Spur Gear: 54 tooth, 0.8 module 32 pitch
Pinion Gear: 13 tooth
Battery: Traxxas Power Cell 8.4V 3000mAh 7-cell with high-current connector
Battery Charger: Body: Painted and trimmed

Bumpers: Front and rear, composite construction
Shocks: Traxxas Ultra oil filled with high-volume body, silicone bladders, dual X-ring seals and progrssive springs Suspension: C-hub design

Transmission: Ball bearing equipped with adjustable Torque-Control slipper clutch with finned aluminum alloy pressure plates
Differentials: Revo-spec sealed silicone filled planetary gear type
Ball Bearings: Rubber sealed
Caster: Adjustable caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Tires: Mud-Terrain, with foam inserts 1.7" (43mm) wide, 4.3" (109mm) diameter
Wheels: Beadlock style split spoke with chrome center and color molded outer rim to simulate beadlock, 12mm hex Steering: Dual bellcrank pivoting on rubber sealed bearings with integrated cam-type servo saver, waterproof digital high- torque (125 oz-in) servo.

INCLUDES: Traxxas Slash 4X4 Short Course Race Truck with 2.4GHz radio system, brushless ESC and motor, body, 7-cell 3000mAh NiMH battery, AC powered charger, decals and illustrated instruction manual.

Specifications:
Length: 530mm
Width: 405mm
Wheelbase: 380.5 to 383.5mm
Gear Ratio: 43:10

Needed To Complete:

2 High Torque Servos
2 Channel Radio System (minimum)
6.0V to 8.4V Flat or Hump Pack Receiver Battery & Charger
1/8 Scale Truggy Tires, Wheels, Inserts & CA Glue
Nitro Fuel & Fuel Bottle
Glow Igniter
Starting System For Engine
Tools for Assembly

Hug n Wag Tearless Puppy Shampoo gives a luxurious, gentle and fearless bathing. Olive oil, aloe vera and pro-vitamin B5 help in strengthening of hairs. Ingredients provide cleansing, conditioning, moisturizing and deodorizing action.

Categories - Veterinary Products, Veterinary Products > Pet Grooming Products

Product Description
Item name:Board Game Trading Card Sleeves
HS code:3923290000
Size:According to your requirements Customized
Material:OPP /VMPET/laminated material
Color:Gravure printing 1-8 colors
Application notes Imported high transparent CPP material, CPP material imported color matte, bright and smooth, feel good

Features
1. 50/60/75/100 individual sleeves per pack;
2. The clear side uses non-glare matte material for soft feel and smoother shuffle;
3. Made from heavy-gauge clear polypropylene for improved protection ;
4. We can accept custom printing pattern or logo, custom 63*90mm,66*91mm ,66*92mm, 69*94mm, etc.;

Applicable Range
We can custom sleeves for magic, Konami and various foreign TCG board game game card sleeves, card game cards all star coat liner.

Align T-REX 600 Nitro Pro 50size RC Helicopter Super Plus Version

1.Both the T-Rex 600 Nitro and 600 Nitro Pro include a Beautiful factory painted fiberglass canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.
2.Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.
3.+-14? collective pitch is possible for extreme 3D performance.
4.Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
5.Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
6.Pitch and All servos moved forward for CG.
7.Battery tray designed for easy and clean radio gear installation.
8.Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
9.Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
10.Heavy duty tail with thrust bearings.
11.95mm Tail Blades.
12.Torque Tube driven tail for incredible 50 sized performance.
13.Rigid frame design that can also handle hard crashes without damage.
14.Carbon Fiber frames, fins and boom supports.
15.Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.
16.Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
17.Ready to fly weight (no fuel) is an incredible 3.20Kg (7lbs).
18.Fuel Tank designed so that no additional header tank is required.
19.New main gear with one-way bearing design for high torque.
20.New flybar paddles feature light weight and sports.
21.New flybar control set design.
22.New tail boom supports.

Data Sheet

- Length:1160mm
- Height:410mm
- Main Blade Length:600mm
- Main Rotor Diameter:1350mm
- Tail Rotor Diameter:240mm
- Engine Pinion Gear:20T
- Autorotation Tail Drive Gear:180T
- Drive Gear Ratio:8.1:1:4.5(E:M:T)
- Flying Weight:Approx. 3200g

Items Included :

Model
- T-REX 600 Nitro Pro?50size RC Helicopter
- T-rex 600 Nitro Pro Landing Skid
- T-rex 600 Nitro Pro Canopy
- T-rex 600 Nitro Pro Manual

Motor
- OS Engine 50SX-H Ring Hyper Heli Engine
- Glow Plug for 600 N

ESC
- B6T 2 In 1 Voltage Regulator HE50H10

Servos
- Futaba BLS251 Digital Servo
- Futaba S9155 Servo x 3
- Futaba S3152 Servo

Gyro
- Futaba GY611 SMM Rate Gyro

Radio
- Futaba 9C Super Transmitter
- Futaba PCM R149DP 9CH Receiver

Battery & Charger
- 600 Carbon Night Blade Charger H60130

Bonus Parts
- Fuel tank HN6009
- 600N Fiberglass Canopy HN6035
- Mavrikk PRO Series Carbon Fiber 600mm Main Blades
- Trex600 EL Flashing Sticker
- 50 High Performance Muffler HE50H08
- 600 Carbon Fiber Night Blades/3K H60131
- Flying Cap BG61548
- Main Blade Holder/New (H60145)
- Radio Sling KX150006
- Flying T-shirt (White) BG61557
- Trex600 EL Flashing Sticker with tail boom

Metal Parts
- Align Metal Main Rotor Holder
- Align Metal Flybar Seesaw Holder
- Metal Tail Control Arm (HN6038)
- Align Metal Tail Pitch Assembly
- Metal Aileron Lever
- Metal Engine Fan
- Align Metal SF Mixing Arm
- Metal Elevator Lever

Crash Kit
- FiberGlass Stabilizer / 1.6mm
- 600 Carbon Fiber Flybar Paddle/3K (H60143)
- Skid Pipe H60137
- Servo Linkage Rod HN6037
- Tail Boom HN6063
- New Carbon Fiber Tail Blade
- New Landing Skid-Black(H60126)
- Align Feathering Shaft
- Align Main Shaft
- 600 Carbon Fiber Tail Boom/3K
- Flybar Rod/440mm (H60108)
- Main Drive Gear/170T H60019-03

Buy Redcat Vigilante 8S 1/5 RTR 4WD Electric Brushless Monster Truck from REALWORLDHOBBY Online Store one of the world's leading online retailers for a wide selection of RC Planes, RC Helicopters, Drones, Cars / Trucks RC, RC Boat, and RC Rock Crawler.

Brand : Redcat
Product Code : RER28035
Availability : In Stock
Price : $430.00
Payment Options : PayPal, Bank Transfer (T/T), Western Union (WU), Wise Transfer, World Remit, MoneyGram International, and Xoom
Shipping Service : FedEx/UPS/DHL
Delivery Time : 5 - 7 Days

Packing:4pcs/ctn ctn g.W.: 13.50

Length:350(mm) width:210(mm) height:115(mm) wheelbase:260(mm)
Gp car engine:taiwan vertex 18cxp/am track:185(mm)
Gp car gear ratio:5.428:1(h), 8.038:1 ground glearance:4.5(mm) weight: 1565g



Length:350(mm) width:210(mm) height:115(mm) wheelbase:260(mm)

Exercise the abdomenf=haunchf=arm muscles;
Can adjust the sport extend;
Exercise times:over 10000 times


1) g.W./n.W: 13/11kg
2) max loading: 100kg
3) measurement: 1160*200*430mm
4) container: 550pcs/40'hq