Wireless Irradiance Sensor

The RainWise solar irradiance sensor is an excellent add-on to the MK-III weather station. This small, precise sensor is hand tested and calibrated at our factory.

DAQ-SP-X4G is a solar-powered RTU wireless collector launched by Shanghai Shucai IoT Technology. It supports various series of 485 interface sensors and supports 4G wireless communication by default. It can remotely monitor and connect various sensors or probes based on RS485 communication, such as submersible liquid level sensors, temperature and humidity sensors, light intensity sensors, wind speed and direction sensors, inclination sensors, electronic water gauges and other outdoor scene sensors.
The product has a built-in rechargeable lithium battery, is rainproof for outdoor use, and is equipped with a universal bracket for easy outdoor installation. The built-in 4G IoT SIM card can be directly connected to the IoT cloud platform , and data information can be viewed directly on WeChat or the website . It is suitable for various remote monitoring scenarios where it is inconvenient to power supply outdoors.

The multi-circuit AC wireless voltage and current sensor /electricity collection monitor is equipped with a multi-channel open-type transformer, which can monitor and collect three-phase voltage, current, power, electricity and other information, and can be used for energy consumption collection and monitoring. It supports RS485 and 4G network interfaces, and the data can be connected to the third-party cloud platform specified by the customer. This product can realize single-phase/ three-phase electricity consumption information monitoring, and is equipped with a 4G network interface that can be directly connected to the Internet of Things, and electricity consumption information can be directly viewed on WeChat or websites on mobile phones. It is suitable for scenarios where online remote monitoring of electricity information is required , easy to install, and beautiful in appearance .

The sensor temperature measuring of the steel equipment or axle bearing is designed to measure the temperature of axle boxes with the transferring data to wagon controller. The temperature sensor is attached directly to the axle box cover with a bolted connection. The power element of the temperature measuring sensor is a built -in battery.
Fastening type bolted joint;
Range of working temperatures 40 + 85 C
Range of measured temperatures 40 + 125
Accuracy of temperature measurement 0.5
Frequency plan EU433 ;
The period of communication is adjusted;
Type of antenna built-in ;
Sensitivity -114 dBm ;
Radio communication range in the tunnel up to 100 m ;
Transmitter output power up to 20 mW ;
Built-in battery capacity 2700 mAh ;
Continuous battery life p to 2 years ;
Dimensions, mm not more than 119 x 32 x 32 ;
Weight, g, not more than 300 ;
Total service life, years, not less than 10 ;
The operating mode is long ;
Dust and water protection rating IP65.

Wireless Analog Sensor System
With G7 wireless analog sensor and Base Station, you can start monitoring sensor measurement online remotely.
Wireless sensor G7 transmits measurement of any industrial analog sensor with 4-20mA/0-5VDC signal to Base Station via wireless signal. Base Station collects all the wireless sensors readings and uploads to central server in interval via Modbus protocol.

[In the Package]
1 x Base Station & RF Antenna
1 x AC/DC Adaptor
1 x Ethernet Cable
Up to 64 x Wireless Sensors in one single system

G7-AD Wireless Analog Sensor
Analog Sensor 4 -20mA signal input
0 - 5VDC signal input
Transmission Interval: User Programmable 5s - 4 hours
Sensor ID: Unique 8 digits
RF Wireless: 433MHz, 4.8Kbit/s
RF Power: 10dBm
Wireless Distance: 1200 meter (unblock)
Operation Rating: 80mA (data transmission)
Standby Rating: 3.0uA (sleep mode)
Operating Voltage: 7- 10V DC
Battery Life: Average 1- 2 year
Dimension: 115 x 90 x 55 mm
Base Station
Protocol: Active
Modbus
Network Port: 10/100M Ethernet
Data Packet: Instant on incoming data of connected sensors
RF Wireless: 433MHz, 4.8Kbit/s
RF Address/Band: 255/15
Operating Voltage: 5 - 20V DC
Rating: 130mA
Operating Temperature: -35 - 75 C
Dimension: 70 x 65 x 35 mm










water pipes network real time monitoring flow rate or pressure sensor
oil/gas pipes network, pump stations flow rate or level sensor
underground water level real time monitoring
environmental monitoring system - wind/CO2/pressure/light sensors
remote Industrial equipment monitoring
wide area equipment monitoring e.g. power plant, antenna tower
measuring equipment data capture and report via Wi-Fi
food chain, storage, transport industry, building management
agricultural, farming, laboratory, medical industry load cell, CO2, light sensors

DAQ-GP-TLL4G wireless liquid level sensor terminal is a wireless liquid level measurement product launched by Shanghai Shucai IoT Technology Co., Ltd. The principle is to use a Wheatstone bridge on a diffused silicon wafer . The measured medium (gas or liquid) applies pressure to change the resistance value of the bridge wall (piezoresistive effect), generating a differential voltage signal. This signal is converted into a standard analog signal or digital signal corresponding to the range by a dedicated amplifier , which can then be converted into the pressure corresponding to the liquid level of the measured liquid. Since there is a certain coefficient proportional relationship between different liquid level depths and liquid pressure , the water level of the measured liquid can be obtained by using this coefficient proportional relationship. This product has strong anti-interference, overload and shock resistance, small temperature drift, high stability, and high measurement accuracy. It is an ideal liquid level measurement instrument in the field of industrial automation .
The sensor terminal supports 4G/WiFi/LoRa and other communication methods by default , as well as MQTT, HTTP and other communication methods. It can overcome the wireless communication obstruction caused by the special on-site environment, greatly simplifying on-site deployment time and reducing construction costs .

DAQ - GP- CO24G wireless infrared carbon dioxide CO2 sensor terminal is a wireless carbon dioxide concentration measurement product launched by Shanghai Shucai IoT Technology Co., Ltd. The principle is to use the non-dispersive infrared (NDIR) principle to detect CO2 in the air. Since different types of gases absorb infrared light of specific wavelengths, the relationship between gas concentration and absorption intensity (Lambert-Beer law) is used to identify gas components and determine their concentrations . Compared with chemical sensors , it is not easily affected by environmental interference.
This device is mainly composed of an optical sensor consisting of an infrared light source, an optical path, an infrared detector, and a software algorithm , and its supporting wireless transmission protocol processing part. This product can be widely used in carbon dioxide concentration monitoring in gas pipelines, smart agricultural breeding, chemical plants, production workshops and other fields.
The sensor terminal supports 4G /WiFi/LoRa and other communication methods by default , as well as MQTT, HTTP and other communication methods. It can overcome the wireless communication obstruction caused by the special environment on site, greatly simplifying the on-site deployment time and reducing construction costs .

SC-GP- PH4G wireless temperature and humidity sensor terminal is a universal wireless PH sensor based on 4G wireless transmission and DC wide voltage power supply launched by Shanghai Shucai Internet of Things Technology Co., Ltd. It can collect pH data in the environment.
Wireless PH sensor terminals support 4G communication , which can greatly simplify on-site deployment time and reduce construction costs . They are widely used in industrial, agricultural and other pH measurement scenarios.