Polyphenylene Ether For Gears, Bearings

PPE material (called Polyphenylene Ether). PPE resin, exhibits low moisture absorption due to its inherent composition. Therefore, good electrical insulation properties will be achieved under temperature and humidity conditions. Chemical reaction from water, most salts, acids and bases is also minimal with PPE material.

MATERIAL: PPE regrind black
CATEGORY: PPE
TYPE: regrind
GRADE: black
SPECIFICATION: Grade V-0, engineering plastic
Origin: Japan
LOADING WEIGHT: 25 Ton
FOB (USD/Ton): 900$ - 1000$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days


PPE Plastic Provides:
Good electrical insulation properties
Long term dimensional stability
Outstanding impact resistance
Light-weight
Heat resistance
Good hydrolysis stability

POM Regrind from zipper Teeth, industry lump, industry runner

Definition of POM resin (polyformaldehyde resin): polyformaldehyde is a linear polymer without side chain, high density and high crystalline properties. According to different chemical structures in the molecular chain, there are two types of homoformaldehyde and copolymers. of both types of polyformaldehyde density, high crystallinity, melting point, but thermal stability, the treatment temperature range is narrow (about 10oC), slightly lower in acid and alkali stability; The density of formaldehyde, melting point, strength and copolymer is lower, but good thermal stability, not easy to decompose, wide range of treatment temperature (about 50oC), acid and alkali stability are good . Plastic has excellent all-round performance. Good physical, mechanical and chemical properties, especially with excellent friction resistance. It is commonly referred to as steel or strip, which is the general engineering plastic third. Suitable for reducing wear on parts, transmitters, chemicals, tools and other parts.

One of the synthetic resins, also known as polyformaldehyde resin, POM resin and steel, etc. This is a kind of white or black plastic resin with high hardness, high steel and high wear resistance. Used for gears, bearings, auto parts, machine tools, tools, etc.

MATERIAL: POM Regrind from zipper Teeth , industry lump, industry runner
CATEGORY: POM
TYPE: Regrind
SPECIFICATION: from zipper Teeth , industry lump, industry runner,Qty per month 52 mt
Origin: Bangladesh
LOADING WEIGHT: 24 Ton
FOB (USD/Ton): 650$ - 850$
Packaging: Jumbo Bag
Est. Shipping Time: 15, 30, 45 days

Injection grade polyphenylene ether (PPO) has a variety of uses, including the following:
Automotive: PPO has a wide range of applications in automotive manufacturing. Due to its excellent heat resistance and dimensional stability, PPO is commonly used in the manufacture of automotive wings, bonnet covers, wing panels, wheel covers, flow stops and other components. In addition, PPO's lightweight characteristics also help to reduce vehicle weight and improve fuel efficiency.
Electrical and electronic field: PPO also has important applications in the electrical and electronic field. Its excellent electrical properties and high temperature resistance make it an ideal material for the manufacture of high-precision electronic components.PPO's high dielectric strength, suitable for high-frequency electric field field, and its dielectric constant and dielectric loss in the engineering plastics is smaller, almost independent of temperature and humidity.
Other fields: PPO is also used in the manufacture of water treatment equipment, medical devices, and high-strength electrical enclosures. Its excellent high temperature resistance and mechanical properties make it an excellent performer in these fields. In addition, PPO's lightweight properties help to reduce product weight and improve the cost-effectiveness of products

The application of polyphenylene ether (PPO) in automotive parts is mainly reflected in its excellent performance, such as heat resistance, flame retardancy, dimensional stability and mechanical properties, etc. PPO plastic has excellent mechanical strength, stress relaxation resistance, creep resistance, heat resistance, water resistance, water vapor resistance and dimensional stability. Its non-toxicity and low relative density also provide advantages such as wear resistance, non-toxicity and pollution resistance.
Specific applications of PPO in automotive parts
The applications of PPO in automotive parts are very wide, mainly including the following aspects:
Electrical and electronic parts: PPO has good electrical insulation and water resistance, and is suitable for making a variety of electrical parts and electronic parts.
Industrial parts: Due to its excellent mechanical properties and thermal stability, PPO is also commonly used in the production of industrial parts1.
Automotive parts: PPO is particularly used in automotive parts, commonly used in the production of Gears, air blades, valves and other parts, and can even be used instead of stainless steel.
Processing characteristics of PPO
In the process, PPO injection molding is appropriate to take high-pressure, high-speed injection, holding pressure and cooling time can not be too long. The main flow channel of the mold is suitable for a larger taper or the use of pulling hooks, sprue to short and thick is good.
Comparison of PPO with other materials
Compared with traditional metal materials, PPO has lighter weight and lower cost, as well as excellent heat resistance and flame retardancy.

Replacing steel with plastic is suitable for fishing reels, bearings, diesel engine gears, pipe fittings, bank mechanical parts, and gas pump parts.
Gears, casters in non-lubricated environment, textile machinery, printer accessories

Flame retardant PC
Features: Good impact performance and weather resistance, reaching UL94-V0 and GWFI 960, complying with ROHS and REACH requirements
Applicable to: charging guns, power strips, charging guns, electrical casings, etc.

Material: Transparent nylon
Features: High temperature resistance 125, light transmittance >92%, water absorption 2%, good chemical resistance
Application: Oil cups, food containers, medical equipment, etc.

The Chinese factory supplies toughened and cold-resistant PA66, which has properties close to DuPont ST801 and is suitable for the production of auto parts, sports equipment and plastic ties.