Bitumen Emulsion

Bitumen Emulsions

Types: Cationic, Anionic, Nonionic, and Modified
Grades: CRS, CSS, CMS, RS, MS, SS, etc.

Applications:

Surface dressing, tack coat, fog seal, prime coat
Slurry surfacing, microsurfacing

Packing & Transport Options
Packing Formats
Bulk (via tankers or ships)

Drums (150â??200 kg, suitable for long-distance)
Poly Bags (300â??1000 kg): safer, solid state transport, recyclable
IBC Containers: 1000 L rigid containers for emulsions

Regional Standards Covered
ASTM / AASHTO

European (EN)
Indian (VG)
Australian
Chinese
South African, Malaysian, British

Note: The prices provided are for reference only and may be subject to change.

Bitumen Emulsion Grade

Bitumen emulsions are usually dispersions of minute droplets of bitumen in water and are examples of oil-in-water emulsions.
The bitumen content can be varied to suit different requirements and is typically between 30% and 70%. The primary objective of emulsifying bitumen is to obtain a product that can be used without the heating normally required when using cutbacks and paving grade bitumen.
In the manufacture of bitumen emulsions, hot bitumen is sheared rapidly in water containing an emulsifying chemical (emulsifier). This produces very small particles of bitumen (the dispersed phase) dispersed in water (the continuous phase). The bitumen particles are stabilized in suspension and do not readily coalesce due to the presence of the emulsifier, which is concentrated on the surface of the bitumen particles.
During application, the water in a bitumen emulsion is either lost by evaporation, or it may separate from the bitumen because of the chemical nature of the surface to which the emulsion is applied. This process is referred to as breaking. Because bitumen has a density only slightly higher than water, sedimentation of the bitumen droplets in an emulsion during storage is very slow. Emulsions can usually be regenerated after long storage times by gentle stirring to re-disperse the bitumen droplets.

Bitumen emulsions are usually dispersions of minute droplets of bitumen in water and are examples of oil-in-water emulsions.
The bitumen content can be varied to suit different requirements and is typically between 30% and 70%. The primary objective of emulsifying bitumen is to obtain a product that can be used without the heating normally required when using cutbacks and paving grade bitumen.
In the manufacture of bitumen emulsions, hot bitumen is sheared rapidly in water containing an emulsifying chemical (emulsifier). This produces very small particles of bitumen (the dispersed phase) dispersed in water (the continuous phase). The bitumen particles are stabilized in suspension and do not readily coalesce due to the presence of the emulsifier, which is concentrated on the surface of the bitumen particles.
During application, the water in a bitumen emulsion is either lost by evaporation, or it may separate from the bitumen because of the chemical nature of the surface to which the emulsion is applied. This process is referred to as breaking. Because bitumen has a density only slightly higher than water, sedimentation of the bitumen droplets in an emulsion during storage is very slow. Emulsions can usually be regenerated after long storage times by gentle stirring to re-disperse the bitumen droplets.

Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water.

Therefore, bitumen emulsion is a dispersed liquid consisting of three products, i.e. water, bitumen and emulsion.

Bitumen emulsion is a mixture of fine droplets of bitumen and water. But as the bitumen is a petroleum product it doesn’t mix with water and as it is sticky in nature, it doesn’t easily gets disintegrated into fine droplets. To overcome this problem an emulsifier is used. Emulsifier can be defined as a surface-active agent. Emulsifier keeps the bitumen in its fine droplet state by disallowing it to mix with other droplets. As the droplets are very fine they suspend in water.

Uses
Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use and can be applied in a wider range of conditions. Advantages
a) Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry.
b) Lower costs are incurred due to a considerable saving on fuel for heating purposes.

c) Operating at lower temperatures for cold mixing gives a greater margin of safety, even though these emulsions may contain fluxing oil.
d) Not only may cold mix be stockpiled for long periods, but it may also be packaged in small containers and stored. This facilitates the treatment of very small areas quickly, cleanly and economically. Disadvantages
A regular water supply is required and this can be a great problem in very hot countries, where water can be in very short supply.


Price of Product (USD) : 432

Product Origin : Merco W.L.L Bahrain

Key Specifications / Special Features :

Type Viscosity  @25°C Penetration & Solubility Residue
Tack Coat K1- 40 25 Max 60- 200 & (97.5) 38%
Rapid Setting RS-1K 20-50 60- 200 & (97.5) 50%
Rapid Setting K1-60 -NA & (97.5) 57%
Rapid Setting CRS-160- 200 & (97.5) 60%
Rapid Setting CRS-2-60- 200 & (97.5) 65%
Rapid Setting K1-70NA & (97.5) 67%
Medium Setting K2-NA & (97.5)57%
Medium Settng CMS 2-60- 200 & (97.5) 65%
Slow Setting K3 20- 100 60- 200 & (97.5) 56%
Slow Setting CSS-1 20- 100 60- 200 & (97.5) 57%


Minimum Order size and packgaing detail

16.00(=/-3%) Metric tons per 20 Foot Container. 200 kgs(+/-3kgs) in one drum.Total no of drums in 1 container 80

Supplier Of Cationic Bitumen Emulsion K1-70 From Turkey and Dubai-UAE

Application of Bitumen Emulsion K1-70
Asphalt K1-70 has various applications in road construction:

Tack Coat: It can be applied as a tack coat to promote adhesion between layers of asphalt pavement. This helps in bonding the new asphalt layer to the existing pavement surface.
Prime Coat: It can serve as a prime coat, applied to the base course or granular subbase to waterproof the surface and improve the bond between the base and the subsequent asphalt layers.
Surface Treatment: It can be used in surface treatments such as chip seals or slurry seals to provide waterproofing, sealing, and skid resistance to the road surface.
Pothole Repair: It can also be used for patching and repairing potholes, providing a quick and effective solution for pavement maintenance.

Supplier of Cationic Bitumen Emulsion K1-60 from Turkey and Dubai-UAE
Cationic Asphalt Emulsion K1-60 Applications
Cationic Asphalt emulsion K1-60 has various applications in road construction and maintenance, including:

Prime coating: Used to prepare the base surface before laying asphalt or other road materials to enhance bonding and waterproofing.
Tack coating: Applied between layers of asphalt or pavement to improve adhesion and prevent slippage.
Surface dressing: Applied as a thin layer over existing surfaces to seal and protect against water penetration, oxidation, and wear.
Patching and repair: Used to fill cracks, potholes, and other surface imperfections in asphalt and concrete pavements.
Dust suppression: Applied to unpaved roads and surfaces to control dust and stabilize aggregates.
Recommended Rate of Application

Supplier Of Cationic Bitumen Emulsion K1-40 from Turkey and Dubai-UAE
Cationic Bitumen Emulsion K1-40 Applications
Cationic Bitumen Emulsion K1-40 is commonly used in various road construction applications, including:

Chip Seals: Applied as a binder for aggregate chips to create durable wearing surfaces on roads, providing protection against weathering and traffic abrasion.
Tack Coats: Used to promote bonding between pavement layers or between pavement and overlays, enhancing the overall structural integrity of the road.
Prime Coats: Applied to prepare the base course before laying the asphalt layer, promoting adhesion between the base and surface layers and improving waterproofing.
Surface Treatments: Utilized for surface treatments like slurry seals and microsurfacing to rejuvenate and protect existing pavements, enhancing skid resistance and prolonging pavement life.
Pothole Repair: K1-40 can be used for patching and repairing localized areas of distressed pavement, providing a cost-effective solution for maintaining road infrastructure.

Cationic Bitumen Emulsion CSS-1h
Cationic Bitumen Emulsion CSS-1h Applications


Cationic emulsions may be used at ambient temperatures with aggregates, which need not be completely dry. Emulsions are less hazardous to use in comparing with cutback, and can be applied in a wider range of conditions. Most CSS-1h applications are listed below:



Biturubber (Rubber)
Bitumalch (Malching)
Prepared cold Mixed Asphalt
Bituprime (Prime Coat)
Bitucoat (Fog Seal â?? Seal Coat)