Stainless Steel Filter Elements

Stainless Steel Filter Element Feature
1. Stainless steel filter element is surface filtration
2. Stainless steel filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth
3. Stainless steel filter element has uniform pore size distribution
4. Wire mesh will not shed in filtration process
5. High compression strength
6. High mechanical strength
7. High rigidity
8. High abrasion resistance
9. Good durability against most liquids, gases and aggressive steam
10. High temperature resistance
11. High filter rating accuracy
12. High filter efficiency
13. Good corrosion resistance
14. Washable and Cleanable
15. Reusable
16. Long service life

Stainless Steel Filter Element Technical Parameter
Raw Material: SS 316L, SS 304
Filter Media: ZWEN Sintered Wire Mesh
Filter Rating: 0.5-300 Microns
Filter Efficiency: > 99.99 %
Operation Temperature: â?¤ 816
Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others
Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector:
1. DOE
2. 220
3. 222
4. 226
5. Thread (NPT,BSP,G,M,R)
6. Flange
7. Special customization

Application
Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry

Stainless Steel Filter Cartridges/Elements

Stainless Steel Filter Cartridges
Stainless steel cartridges are filters made of multiple layers of stainless steel 304/316 mesh with a protective stainless steel cartridge housing. The middle mesh layer determines the filtration efficiency and is covered with an outer and inner layer of coarser mesh to provide support and protection. These stainless filter cartridge can be designed in plain cylindrical or pleated configurations to increase the filtration area.

Working Principle
Stainless steel cartridges capture or block impurities (e.g., chemical and physical impurities) in the fluid as it flows through.

Wide range of applications
Power Generation
Water Treatment
Chemical Processing
High Pressure Differential
Corrosive oil and gas
High Temperature
Electronics
Factory equipment

The main filter material of the stainless steel corrugated filter element is SS304, 304L, 316, 316L, 904L etc. Stainless steel fiber sintered mat and stainless steel woven mesh are the main filter media. Stainless Steel fiber sintered mat is a porous and deep-shaped filter material made of stainless steel fiber through high-temperature sintering. Stainless steel woven mesh is woven from stainless steel wire. Each sealing surface of the filter element is welded by the arc welding process. The filter layer adopts a multi-fold folding process to form a complete filter element without leakage or medium shedding and with a large filtering area and high filtration efficiency.

The stainless steel filter element is a kind of filter material with high strength and overall rigidity, which is made of multi-layer metal sintered mesh, which is made of multi-layer stainless steel mesh after special laminated pressing and vacuum sintering. The pores are interlaced to form a uniform and ideal filtration structure.
The stainless steel pleated filter element is folded by special stainless steel wire mesh. The pleated process makes the filter element have a large filtration area, high dirt holding capacity and high flow rate. Each seal adopts argon arc welding process, no leakage, and can be used in high temperature and high pressure filtration environment. The stainless steel filter element has excellent performance, and the filter element can be cleaned repeatedly.
Products Parameters
Main filter material: SS316 SS304 SS316L SS304L
Main filter media: stainless steel fiber sintered felt and stainless steel woven mesh
Regular outer diameter: 25 30 35 50 60 63.5 65 100 150mm (customized)
Regular inner diameter: 25 30 35 50 100 150mm (customized)
Length: Generally 5", 10", 20", 30", 40" (customized)
Interface form: 222 226 215 M36 M28 M24 M22 M20 threaded interface
Maximum working temperature: 500
Filtration accuracy: 1-200um
Working strength: 0.1-30MPa
Processing: The sealing surfaces of the filter element are joined by argon arc welding process, and the filter layer adopts multi-fold folding process to form a complete filter element without leakage and medium shedding.
Features
1. The precision filter element made of stainless steel has high porosity, excellent air permeability, low resistance, and low pressure difference;
2. The stainless steel precision filter element's filter area and dirt-holding capability are both substantial after folding;
3. The high temperature resistance, corrosion resistance, and suitability of the stainless steel precision filter element for high viscosity liquid filtering;
4.Effective renewal;
5.All-stainless steel construction; broad chemical compatibility;
6.6. Reusable after chemical, high temperature, and ultrasonic cleaning.
Applications
Environmental protection, petroleum, chemical, medical, high temperature gas filtration, scientific research, metallurgy, food, machinery, and other sectors use stainless steel pleated filter elements extensively.
1. Filtration of various high temperature and corrosive liquids in the petroleum and chemical sectors;
2. Filtration and purification of various polymer melts in the chemical fiber and film industries;
3. Thorough filtration for mechanical equipment of different hydraulic oils and lubricating oils;
4. In the pharmaceutical, biological, beverage, and other sectors, the clarification and filtration of various liquids.

Stainless Steel Sintered Filter Element Feature
1. Stainless steel sintered filter element is surface filtration
2. Stainless steel sintered filter element is good for backwash because the pore passage of zwen sintered wire mesh aperture is very smooth
3. Stainless steel sintered filter element has uniform pore size distribution
4. Wire mesh will not shed in filtration process
5. High compression strength
6. High mechanical strength
7. High rigidity
8. High abrasion resistance
9. Good durability against most liquids, gases and aggressive steam
10. High temperature resistance
11. High filter rating accuracy
12. High filter efficiency
13. Good corrosion resistance
14. Washable and Cleanable
15. Reusable
16. Long service life

Stainless Steel Sintered Filter Element Technical Parameter
Raw Material: SS 316L, SS 304
Filter Media: ZWEN Sintered Wire Mesh
Filter Rating: 0.5-300 Microns
Filter Efficiency: > 99.99 %
Operation Temperature: â?¤ 816
Outside Diameter: 10 mm, 15 mm, 25 mm, 30 mm, 50 mm, 60 mm, 63.5 mm, 65 mm,100 mm,150 mm, 250 mm, 380 mm, 500 mm or others
Length: 40 mm, 90 mm, 127 mm, 254 mm, 508 mm, 762 mm, 1016 mm or others
Gasket: PTFE, Viton, Silicone, Buna-n, EPDM
Connector:
1. DOE
2. 220
3. 222
4. 226
5. Thread (NPT,BSP,G,M,R)
6. Flange
7. Special customization

Application
Polyester filtration, polymer filtration, high viscosity filtration, fuels and lubricants filtration, oil filtration, steam filtration, high temperature gas filtration, high temperature liquid filtration, steam filtration, potable and process water filtration, beverages filtration, detergent filtration, solvents filtration, pharmaceutical industry, chemical industry, chemical fiber industry, food industry

Polished stainless steel powder filter elements are manufactured using high-quality stainless steel powder that has been processed using advanced technology. These filters have a uniform structure with high porosity and pore diameter ranging from 0.2�¼m to 100�¼m, and porosity between 35% to 60%.

Polished stainless steel powder filter elements are available in various shapes and sizes, including cylindrical and disc-shaped. The cylindrical filter elements have a diameter ranging from 10mm to 1000mm, while the disc-shaped filter elements have a diameter ranging from 5mm to 300mm. The filter elements generate uniform filtration and have low resistance, which reduces energy consumption.

Products Parameters

Material: S304/SS316L
Outer diameter: 5~300mm
Length: 10~1000mm (more than 1000mm can be welded)
Filtration accuracy: 0.2um~100um
Surface treatment Polished
Inlet/outlet connection Screw thread, flange

Features
durability, corrosion resistance, and high-temperature tolerance
can be cleaned and reused multiple times
Additionally, the polishing process helps to create a smoother surface, which can improve the filter's efficiency and reduce the risk of clogging.
Compatibility: Polish stainless steel filters are compatible with a wide range of liquids and gases, including corrosive and high-temperature fluids. They are also resistant to many chemicals, making them suitable for use in harsh environments.

Products Applications
Food Industry: Polish stainless steel filters are commonly used in the food industry to remove contaminants such as bacteria, yeast, and sediment from liquids. They are used in various applications, including filtering wine and beer, filtering cooking oil, and clarifying juices and syrups.

Pharmaceutical Industry: In the pharmaceutical industry, Polish stainless steel filters are used to remove impurities and particles from liquids used in drug production. They are also used in sterile filtration to remove microorganisms and other contaminants from pharmaceutical solutions.

Water Treatment: Polish stainless steel filters are used in water treatment to remove impurities and particles from water. They are commonly used to filter drinking water, wastewater, and industrial process water.

Compatibility with Extreme Temperatures: Polish stainless steel filters are compatible with extreme temperatures, making them suitable for use in high-temperature applications. They can withstand temperatures up to 1000 F (538 C) and are commonly used in applications such as high-temperature gas filtration.

Product Introduction

The stainless steel filter element is a kind of filter material with high strength and overall rigidity, which is made of multi-layer metal sintered mesh, which is made of multi-layer stainless steel mesh after special laminated pressing and vacuum sintering. The pores are interlaced to form a uniform and ideal filtration structure.

The stainless steel pleated filter element is folded by special stainless steel wire mesh. The pleated process makes the filter element have a large filtration area, high dirt holding capacity, and high flow rate. Each seal adopts argon arc welding process, has no leakage, and can be used in high-temperature and high-pressure filtration environments. The stainless steel filter element has excellent performance, and the filter element can be cleaned repeatedly.



Products Parameters

Main filter material:

Main filter media: stainless steel fiber sintered felt and stainless steel woven mesh

Regular outer diameter: 150mm (customized)

Regular inner diameter:
Interface form: M20 threaded interface

Maximum working temperature: 500

Filtration accuracy: 1-200um

Working strength: 0.1-30MPa


Features

1. The precision filter element made of stainless steel has high porosity, excellent air permeability, low resistance, and low-pressure difference;

2. The stainless steel precision filter element's filter area and dirt-holding capability are both substantial after folding;

3. The high-temperature resistance, corrosion resistance, and suitability of the stainless steel precision filter element for high viscosity liquid filtering;

4. Effective renewal.


Applications

Environmental protection, petroleum, chemical, medical, high-temperature gas filtration, scientific research, metallurgy, food, machinery, and other sectors use stainless steel pleated filter elements extensively.

1. Filtration of various high-temperature and corrosive liquids in the petroleum and chemical sectors;

2. Filtration and purification of various polymer melts in the chemical fiber and film industries;

3. Thorough filtration for mechanical equipment of different hydraulic oils and lubricating oils.

Stainless Steel Filters Element

Filter Information:
Material,Stainless steel 304, 316, 316L
Job Stress,20 mpa
Efficiency,99%
Working Temperature,120 degree
Wire Diameter,0.02-2.0mm
Filteration Precision,1-100 u
Some P/N of replaced taisei kogyo hydraulic filter element:,,,
350-08-100K,350-A06-20UW,3501-2-100K,3501-3-40U
350-08-100W,350-A06-3M,3501-2-100W,3501-3-40UK
350-08-10M,350-A06-40U,3501-2-10M,3501-3-40UW
350-08-10U,350-A06-40UK,3501-2-10U,3501-3-50UK
350-08-10UK,350-A06-40UW,3501-2-10UK,3501-3-50UW
350-08-10UW,350-A06-50UK,3501-2-10UW,3501-3-5UK
350-08-150K,350-A06-50UW,3501-2-150K,3501-3-5UW
350-08-150W,350-A06-5UK,3501-2-150W,3501-3-6M
350-08-200K,350-A06-5UW,3501-2-200K,3502-2-100K
350-08-200W,350-A06-60UK,3501-2-200W,3502-2-100W
350-08-20U,350-A06-60UW,3501-2-20U,3502-2-10M
350-08-20UK,350-A06-6M,3501-2-20UK,3502-2-10U
PGUL10A50U,PGUL16A10M,PGUL08A50UW,PGUL06A10UW
PGUL04A10U,PGUL16A40U,PGUL12A50U,PGUL10A50U
PGUL08A10U,PGUH10A8C,PGUH06A3M,PGUH08A100W
TAISEIKOGYO,PGUL20A24U,PGUH06A100W,PGUL20A20U
PGUH10A50UW,G-UL-12A-50U-W-DV,,

Product Introduction

The parallel oil filter element is a reliable and efficient solution for oil filtration, especially in large-flow hydraulic lubrication systems. Its parallel configuration, composed of two or more filter layers, provides several benefits including increased filtration area, high porosity, and strong dirty holding capacity. This design also allows for easy installation and disassembly, making maintenance a breeze.

Customers can customize the filter element with two to five parallel filters, depending on their specific requirements. This flexibility and scalability make it an ideal choice for various industries including metallurgy, power, chemical, environmental, and more. It can filter various types of oil including crude oil, fuel oil, diesel oil, kerosene, gasoline, lubricating oil, hydraulic oil, machine oil, and gear oil. Moreover, it can also clarify the filtration of raw water, sewage water, white water, reclaimed water, and more.


Products Features

Large Filtration Area: The parallel filter element has a multilayer configuration that significantly increases its filtration area, resulting in more efficient and thorough filtration.

Long Service Life: With its durable construction and layered filtration design, the parallel filter element offers a longer service life, reducing the need for frequent filter replacements.

Easy to Assemble and Disassemble: The parallel filter element is easy to install and disassemble, with several filters connected in parallel from small to large and secured by bolts.

Suitable for Various Industries: The parallel filter element is suitable for various industries, including metallurgy, power, chemical, and environmental, and can filter various types of oil and fluids, such as crude oil, lubricating oil, and even wastewater.