Low Cost Pressure Sensor

Honeywell BW Solo is a easy to service single-gas detector with BLE connectivity that provides real-time visibility into the status and safety of hazardous-area workers, helping companies respond faster, more knowingly and decisively to safety incidents. The first single-gas detector with the 1 Series sensor for CO, H2S and O2

Features & Benefits:
User-friendly operation,
Easy-to-read display for multiple languages,
Lightweight convenience,
Ease of maintenance,
Serviceability,
The new 1-Series sensor for enhanced reliability,
Connected Bluetooth Low Energy (BLE) capabilities.

Application: CNG, LPG, LNG, AIR
Body Material: Aluminium
Pressure (absolute): 0~400kPa
Accuracy:1% for pres. & temp.
Thermal compensation:Yes
Pressure response time: 1ms
Temperature sensor:NTC 10KΩ (B25/50=3950)
Temperature response time:2s
Working Temp: -40~120
Socket Thread: M12x1.25 (defalt), M12x1
Connector type: C4
Mate Connector: AMP 1-967640-1
Burst Pressure:1600kPa
Protection: IP67

Humidity & Temperature sensor - HTU21D
1.Product Description:
HTU21D, the new digital humidity sensor with temperature output of MEAS is about to set new standards in
terms of size and intelligence: Embedded in a reflow solderable Dual Flat No leads (DFN) package of 3 x 3 mm foot print and 0.9 mm height it provides calibrated, linearized signals in digital, I²C format.
HTU21D digital humidity sensors are dedicated humidity and temperature plug and play transducers for OEM applications where reliable and accurate measurements are needed. Direct interface with a micro-controller is made possible with the module humidity and temperature digital outputs. HTU21D digital humidity sensors are low power consumption designed for high volume and cost sensitive applications with tight space constraints.
Every sensor is individually calibrated and tested. Lot identification is printed on the sensor and an electronic identification code is stored on the chip – which can be read out by command. Furthermore, the resolution of HTU21D digital humidity sensor can be changed by command (8/12bit up to 12/14bit for RH/T), low battery can be detected and a checksum improves communication reliability.
With made improvements and the miniaturization of the sensor the performance-to-price ratio has been improved – and eventually, any device should benefit from the cutting edge energy saving operation mode.
2.Main Application:
• Automotive
• Home Appliance
• Medical
• Printers
• Humidifier
• Multimedia: Smartphone, Tablet

3.Main Features:
• Full interchangeability with no calibration required in standard conditions
• Instantaneous desaturation after long periods in saturation phase
• Compatible with automatized assembly processes, including Pb free and reflow processes
• Individual marking for compliance to stringent traceability requirements.

4. PERFORMANCE SPECS :


5. ELECTRICAL AND GENERAL ITEMS :



6. SENSOR PERFORMANCE :


7. RELATIVE HUMIDITY ERROR BUDGET CONDITIONS AT 25° C :

The fuel rail sensor, commonly referred to as the Fuel Pressure Sensor, it is installed at one end of the oil rail to measure the fuel pressure in the common rail pipe.
Fuel Pressure sensor 4930429 is a part of vehicle s fuel system and designed to monitor the fuel pressure that is present at the fuel rail. It sends this signal to the ECU, which then uses it to make adjustments to the vehicle s fuel and timing. When the sensor has an issue it can cause problems with the performance of the vehicle.

Quality Guarantee :1 year, and strictly in accordance with the standard quality inspection
The products are 100% new and carefully packed.

1.Name: Fuel Pressure sensor,Fuel high Pressure sensor
2.Certification: CE, TS16949
3.Model NO.: 4930429
4.Function: Control emissions in combustion environments
5.Application: BOSCH CUMMINS DODGE KOMATSU
6.Ciondition: 100% NEW
7.Weight(g): 50.7g
8.Deliverytime: 7-15 days
9.Packing: Neutral packing Customize according to customer needs

PE coil pipes and tubes for water and wire cable conduit PL231


The PE coil pipes and tubes can be used:

water pipe 4 â?? 6 â?? 1-inch black coil with pressure 1.6mpa, OD 20-75mm, WT 2.3-6.8mm
pe conduit cable embedded wire cable and optical cable, OD 20-200mm, WT 1.8-3.5mm
weak current protection tube and communication tube, OD 20-200mm, WT 1.8-3.5mm


We use new 100% pure raw PE material


WHY NEW MATERIAL HDPE PIPES?

1. Health performance

PE pipe processing without adding heavy metal salt stabilizer, no scaling layer, and no bacteria.

2. Corrosion resistance

It can resist various chemical media erosion, with no electrochemical corrosion.

3. Service life

Under rated temperature and pressure conditions, PE pipes can be used for more than 50 years.

4. Impact resistance

PE pipe toughness, high impact strength, heavy objects directly pressed through the pipeline will not break.

5. Connection performance

The strength of the hot melt or electric melt interface of the polyethylene HDPE pipe is higher than that of the pipe body, and the joint will not be broken due to soil movement or live load.

6. Construction performance

It has a lightweight pipe weight, a simple welding process, convenient construction, and a low overall project cost.

Specifications:
1) Power Supply: 5V DC
2) Electric current: 2mA (max. 5mA)
3) Temperature operating range: 20 â?? 50 0 C
4) Humidity operating range: 0 â?? 100% Rh
5) Humidity measurement range: 20 â?? 80% Rh
6) Accuracy: 5% Rh (at 25 0 C and 5 V DC)
7) Temperature Storage range: -20 to 85 0 C
8) Humidity storage range: below 85% Rh
9) Size: 34.7 x 21.6 x 10 mm
10) Polarity Protection: Not Provided

-

OUTPUT : 4-20 MA
SUPPLY : 24 VDC
TYPE :2 WIRE
PRESSURE TRANSMITTER CAPSULE TYPE
PROTECTION CLASS : IP 65
PROCESS CONNECTION : 1/2 " BSP;1/2"NPT ;1/4"BSP;1/4"NPT
FIXED RANGE CAPSULE TYPE

Smp 6100 high stable oem sensor is the piezo-resistive pressure sensor with isolated construction and precise compensation. It uses mems silicon die, combined with our company's unique design and production process. Each product's production has adopted a strict aging, screening and testing processes, to ensure excellent quality and high reliability, and to provide high-quality products for the long-term use of customers.
This series of products can be reliably used in hydraulic systems, industrial process control and other application.

Features:
Measuring range: -100kp?¦0k10kp?¦100mpa
Wide temperature compensation: -0
Ss 316l
19mm*11.5mm standard oem pressure sensor

Application
Process control
Hydraulic system