Opgw Splice Box

Product Characteristic

>Material selection of high quality cold-rolled steel sheet, electrostatic spray surface, stylish, sturdy, easy to use

>Inside the cable fixtures, splice and clamps

>Fully enclosed, protecting

>Suitable for outdoor armored, indoor soft cable

>Standard cell size, 19 inches in width, can be mounted both distribution frame cabinet/rack can also be used with equipment rack

>Structure the use of thicker passivation of galvanized cold rolled steel plate or surface coating technology, adapter works with the original Japan import ceramics core, guarantees excellent mechanical and optical properties

>Combines the advantages of the optical fiber distribution box, also available as cable terminal box; can be individually assembled into optical fiber distribution frame, also available with digital distribution units, audio accessories, bunding in a cabinet/rack which constitute an integrated distribution frame

>Flexibe configuration, installation and simple to use, easy to maintain, easy to manage, it is essential for line fiber/jumper fiber/splice fibr/optical fiber of the small and medium size communication room.

 communication engine room, jumping fiber, cable and splice one access the essential equipment

Technical parameters

>Several coupled interfaces

>Compact Optical is used for fiber splice, optical adjustment, cable protection and so on

>The height 1U is suitable for Cabinet or rack

>Conform to ISO/IEC11801 standards

-

Product Explanation

GHT Connector Box cable is production based on YD/T814.1-2004 standard, through a third partycertification, fully to meet and surpass these standards. This series applies to telecom networks, local are a networks, FTTx, TVs, test equipment, fiber-optic sensor CATV optical fiber and rescure, such as optical fiber transmission systems, achieve the middle joints, distribution, and protection of the realization of optical fiber cable line, doing a good job in a variety of harsh environments, and fully into account in the design of simplified operation, flexible configuration requirements.

Product Characteristic

>Housing made of high quality and special material, high strength, corrosion resistance, ageing resistance, 

 fire prevention, can be adapted to a variety of harsh environments


>Made of high quality stainless steel screws and hooks, imported sealing, the sealing property is reliable

>Horizontal or cap-style structure can meet the directly buried, pipelines(tunnel), wall-mounted or overhead installation environment

>Leniency splice tray designed to ensure fiber bending radius â?¥40mm, full protection device

>Set the perfect fiber-optic fixed and strengthen the core, stripping, grounding protection device

>Set the repeat opening device and embedded sealing strip, repeated opening convenient, labor-saving, good packing performance

>Applies to both single-core and multicore and fiber, can support a manximun number of cores 288 cores

>Operation and maintenance convenient and fast

Features:

Suitable for the protection of fiber cables, the scope of application includes aerial, underground, pipeline, and hand hole
Fixed and sealed by insert plates and bolts
Standard splice trays with single tray access and up to 192 fibers splicing
Up to six inlet/outlet ports, configured with one set plastic seal fittings
Adopts the turnover structure, convenient for fixing sleeve, winding fiber cable, enlarging and repairing
High quality PC material
Easy operation

Specifications:
Housing dimensions (L x W x H): 450 x 216 x 160mm
Cable inlets/outlets: six pieces
Diameters of cable inlets/outlets: ª+23 (2), ª+20 (2), and ª+16mm (2)
Splice trays available: 12 and 24 cores
Number of trays: one to eight pieces
Splice capacities: 12 to 192 cores

While straight-through fiber cable is for branching application, fibers uncut are for straight-through after being fixed and winded, fibers cut off are for branching after fusion splicing with fibers of other branching fiber cable.


standrd size

Fiber Distribution Box: FDB-16C-1
Feature:

Water-proof design with IP-66 Protection level
Integrated with splice cassette and cable management rods.
Manage fibers in a reasonable fiber radius condition.
Easy to maintain and extend the capacity
Fiber bend radius control more than 40mm.
Suitable for the fusion splice or mechanical splice.
1x2/1x4/1x8/1x16 Splitter Can be installed as an option.
Efficient cable management.
Entrance cable OD:6-12mm
Distribution cable of 16 ports for 2-4mm drop cable.
Wall Mount and Pole mount Install

Specifications:

Material : PC+ABS
Size : 303x236x109mm
Max Capacity : Splice 16/32 Fibers(1*8/1*16 mini type splitter)
Numbers of Adapter : 16 pcs SC/UPC or SC/APC
Weight : 1.5kgs
Color : Black

SC APC SC UPC Dual Round Duplex 2.0mm Single Mode Fiber Optic Pigtail PVC


Pigtails are used for splice applications when terminating outside plant cable. Its consists of a connector and a special length of fiber cable. Meets Telcordia GR-326 Core and ROHS requirements. All of OMC pigtails are factory inspected and tested, with available interferometer data upon request.

OMCs pigtails are manufactured and tested in compliance with TIA 604 (FOCIS), IEC 61754 and YD/T industry standards. OM1, OM2, OM3, OM4, OM5 or OS2 fiber types to meet the demand of Gigabit Ethernet, 10 Gigabit Ethernet and high speed Fiber Channel. Every termination through rigorous parameter test to ensure the highest in network performance.

SMA-SMA Simplex Optic Fiber Patch Cable Multi-mode OM1 OM2 High Quality PVC Patch Cord Jumper

Patch Cords are used to provide optical connection for fiber optic electronics. The use of the patch cord provides a quick and easy method for routing fiber patches in data centers, head-ends, cellular hubs and central offices. The patch cord can be used in interconnect or cross-connect path connecting the incoming fibers to the electronic equipment and providing patching within the fiber paths. Patch Cords include simplex, duplex and Multi-fibers assemblies.


OMCs Patch cables are manufactured and tested in compliance with TIA 604 (FOCIS), IEC 61754 and YD/T industry standards. OM1, OM2, OM3, OM4, OM5 or OS2 fiber types to meet the demand of Gigabit Ethernet, 10 Gigabit Ethernet and high speed Fiber Channel. Every termination through rigorous parameter test to ensure the highest in network performance.


Connectors Standard:

SMA: TIA/EIA, FOCIS10, GR-326 EIA/TIA-604-10, IEC61754-20 and JIS C5973.


Features

1.100% pre-terminated and tested in factory to ensure transfer performance.

2.Rapid configuration and networking, reduce installation time.

3.Supports 40G and 100G network applications.

4.Low insertion loss and added loss.

5.Supports up to 12F, 24F, 48F, 72F, 96F, 144F, customized products are available.

6.High back loss, small volume, light weight.

7.End-face geometry and quality superior than IEC and Telcordia standards.

8.LSZH, OFNP, OFNR cable jacket.

9.Mechanical performance: IEC 61754-20 standard.

10.RoHS and REACH materials compliant.

Structure:
Single fiber, double fiber, four fiber, six fiber and muti-fiber ctc.
Applications:
Apply to transnaision equipment telephone data processing equipment and communication, and it is optical transmission wire in transmission network.
Cable cross-section
Pdr chromatogram
Outer sheath:
Orang -- muti mode optical fiber
Yellow -- mode optical fiber
Lnner sheath:
Orang -- muti mode optical fiber
Yellow - - single mode optical fiber
Muti-cable:
Outer coating--orange
Cable specifications:
Attenuation coefficient and bandwidth level
Attenuation coefficient