Inconel 600 Round Bar

Classification : Inconel Alloy
Inconel Bar It has good high-temperature corrosion resistance and oxidation resistance, excellent cold and hot processing and welding process performance, and satisfactory thermal strength and high plasticity below 700. Alloys can be strengthened by cold working, and can also be joined by resistance welding, fusion welding, or brazing.

192 is the steel of carbon structural steel, which is a kind of alloy steel and carbon steel. The carbon content is about 0.05%~0.70%, and some can reach up to 0.90%. It can be divided into ordinary carbon structural steel and high-quality carbon structural steel.

Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.



Material

A192
Thickness

0.1mm-300mm or as required

Standard

AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique

Hot rolled,cold rolled

Surface Treatment

Clean, blasting and painting according to customer requirement

Thickness tolerance

�±0.1mm

Application

It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time

Within 7-15 workdays after receiving deposit or L/C

Export packing

Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity

250,000 tons/year



Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.

Performance and application of material ST37: the material has good performance, that is, through cold rolling, it can obtain cold rolled strip and steel plate with thinner thickness and higher precision, with high straightness, high surface finish, clean and bright surface of cold rolled plate in Taiwan Strait, easy to be coated, various varieties, wide application, high stamping performance, non aging, and low yield point.

Now the common round steel processes are hot rolling, forging and cold drawing. The steel quality and application scope of these three processing modes will also have some differences. For example, the specification of hot rolling is generally 5.5-250MM, and the appropriate steel can be selected according to the actual needs.
Generally, parts are manufactured by machinery or used as seamless steel pipe blanks, and steel is also used in some building construction.
Round steel has relatively high strength, high hardenability and very good toughness, so its pressure bearing capacity is also guaranteed. Even if it is used at high temperature, the creep strength is high and the durability is also guaranteed.



Material

ST37
Thickness

0.1mm-300mm or as required

Standard

AISI,ASTM,DIN,BS,JIS,GB,JIS,SUS,EN,etc.

Technique

Hot rolled,cold rolled

Surface Treatment

Clean, blasting and painting according to customer requirement

Thickness tolerance

�±0.1mm

Application

It is mainly used to make structural parts such as car girder, beam, transmission shaft and car chassis parts, which can reduce the weight of the parts.

Shipment time

Within 7-15 workdays after receiving deposit or L/C

Export packing

Waterproof paper, and steel strip packed.
Standard Export Seaworthy Package.Suit for all kinds of transport,or as required

Capacity

250,000 tons/year



Round steel belongs to carbon structural steel for construction and machinery, while square steel belongs to carbon structural
steel for machinery. Both of them are simple section steel, and their section shapes are respectively round and square. Low carbon is mainly used for
drawing wire, forging rivets, bolts, nuts and other metal products of raw materials. Medium carbon round steel and square steel
are generally used to make mechanical structural parts.

Inconel 625 Hex Bar, Alloy 625 Bar Inconel 625 Square Bar suppliers in Mumbai, India

Buy Inconel 625 Flat Bar from India, ASTM B446 UNS N06625 Round Bar, Inconel 625 Rod Stock at factory price in India

Buy Inconel 625 Welding Rod at low cost from Inconel 625 Round Bar suppliers in South Africa, UK, Houston, Australia, USA, Singapore, Canada and Indonesia.

Alloy 625 material is a corrosion and oxidation resistant nickel alloy that is used both for its outstanding aqueous corrosion resistance and high strength. Inconel 625 has a Specific Heat of 427 J/kg-C (0 100 C), 0.102 BTU/lb-F (32 212F). Inconel 625 has a Thermal Conductivity of 212F (100C) and an Electrical Resistivity of 128.9 Microhm-cm at 21C (50.8 Microhm-in at 70 F).Its outstanding strength and toughness is because of the niobium addition in it which perform with the molybdenum to stiffen the alloys matrix. Alloy 625 has excellent fatigue strength and stress-corrosion cracking resistance to chloride ions.The Melting Range of Inconel 625 is 12901350 C (2350 2460 F).

Inconel alloy 625 products are a type of Nickel based alloy with a high Chromium content (approx. 25wt%) with an addition of Aluminium.Inconel 625 has a Chemical Composition of: Nickel 58.0 min. Chromium 20.0-23.0. Iron 5.0 max. Molybdenum 8.0-10.0. Niobium (plus Tantalum) 3.15-4.15. Carbon 0.10 max. Manganese 0.50 max. Silicon 0.50 max. Phosphorus 0.015 max. Sulfur 0.015 max. Aluminum 0.40 max. Titanium 0.40 max. Cobalt a 1.0 max. Alloy 625 material has a density of 8.44 g/cm3 (0.305 lbs/in3). Alloy 625 is mainly used for high temperature oxidising applications in the heat treatment of metals and materials.The properties of INCONEL alloy 625 make it a material of broad utility in such fields as aerospace, chemical processing, thermal processing, power generation and pollution control. These Inconel 625 material are also used in waste flare gas stacks in petroleum refining.

Heubach international is Inconel 625 Round Bar Suppliers, We are one the dedicated supplier of Inconel 625 Flat Bar, Inconel 625 Hex Bar, Inconel 625 Square Bar at very low price in Mumbai, India. we are since 2004 Alloy 625 Bar suppliers in india in various sizes & threads.We manufacture Inconel 625 round bar, rods, bar, round bar, hex bar, square bar, flat bar, hexagon bar, hexagonal bar, rounds, hot rolled bar, cold rolled bar, cold drawn bar, bright bar, billets, bloom in India.

We maintain stock & supply Alloy 625 Round Bar to more than 60 locations worldwide.in our warehouse you find a large inventory of Inconel 625 Rod including Inconel 625 Welding Rod, Inconel 625 Filler Rod, Inconel 625 Threaded Rod and more than 100 types of UNS N06625 Bar. Offer A wide range of Inconel 625 Rod in all sizes including 3mm*20mm*20mm~12mm*100mm*100mm or as per clientsâ?? requirements

Standard
ASTM B166 / ASME SB166


Dimensions
ASTM, ASME and API


Round Bars Size
10 mm To 100 mm Dia in 100 mm TO 6000 mm Length.


Round bar Diameter
3-~800mm


Hex Bar size
2-100mm A/F


Square bar size
4 to 100mm


Flat bar Thickness
2 -100mm


Flat bar Width
10 to 500mm


Length
3 to 6 meter, Custom Cut Lengths


Form
Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,

We offer monel rods in different forms including pre-cut and custom forged. Thespecifications of these rods comply with International standards. Our range ofmonel rod can be availed in different sizes a per applicationrequirements.

Stainless Steel Wire Rod, Bright, Hex, Round, Flat, Hexagon, Triangle, Square Bar : ASTM / ASME SA 276 TP 304 , 304L , 309S , 309H, 310S , 316 , 316L , 316 TI , 317 , 321 , 347 , 410 , 420 , 430 ,431 , 440A ,B & C, 446

ASTM / ASME SA 479 TP 304 , 304L , 304H, 309S , 309H, 310S , 310H , 316 , 316H , 316L , 316 TI , 317 , 321 , 321H , 347 , 347 H , 410, 430 ,431 & 444.Duplex Steel Wire Rod, Bright, Hex, Round, Flat, Hexagon, Triangle, Square BarASTM / ASME SA 276 UNS NO. S 31803 , S 32205 , S 32550 , S 32750 , S 32760.