Fuel Oil Cst 180

Fuel Oil is a fraction obtained from petroleum distillation either as a distillate or a residue Broadly speaking oil is any liquid petroleum product which is burned in a furnace or boiler for the generation of heat or used in an engine for the generation of power except oils having a flash point of approximately 40 C 104 F Oil is made of long hydrocarbon chains particularly alkanes cycloalkanes and aromatics The term Fuel Oil is also used in a stricter sense to refer only to the heaviest commercial fuel that can be obtained from crude oil heavier than gasoline and naphtha

Fuel oils are used as fuel for power generation marine bunkers and large industrial heating plants Fuel oil 180 CST also known as Bunker Fuel or Residual Fuel Oil is characterized by its viscosity which is measured in centistokes CST The number 180 indicates the maximum viscosity of the oil at 50 degrees Celsius This specification makes it a relatively thick and viscous fuel compared to lighter fuel oils Both CST 180 and CST 380 fuel oils are considered heavy fuel oils and are commonly used in the shipping industry They are often referred to as bunker fuels and are used in vessels like cargo ships container ships and oil tankers

Fuel oil CST (CST stands for Centistokes) 180, 280, and 300 are grades of heavy fuel oils used primarily in industrial applications such as marine vessels and power generation. CST 180 has a lower viscosity, making it suitable for engines with higher
operating temperatures. CST 280 and 300 are heavier grades with higher viscosities, often used in applications requiring more power output and in equipment with larger combustion chambers. These fuel oils are derived from crude oil refining processes
and are valued for their energy density and affordability, making them crucial in
various sectors reliant on reliable and cost-effective energy sources.

FUEL OIL CST-180
Minimum Quantity: 10,000 Metric Tons per month
Maximum Quantity: 500,000 Metric Tons per month
Price CIF: Gross USD$390.00/ USD$380.00 Net CIF
FOB Price: Gross USD $370.00/ USD $360.00 Net on FOB
Origin: AZERBAIJAN, GEORGIA
Payment: T/T, MT103

SOFT CORPORATE OFFER

ATTENTION TO BUYER/BUYER REPRESENTATIVES.
Here by issue this Soft Corporate Offer with presented term conditions and confirm our irrevocable corporate and legal responsibility, under penalty of perjury that we are ready, willing and able to supply the below mentioned products herein and issue a draft Contract then Sales Purchase Agreement upon acceptance of our term and conditions stipulated herein. The term and procedures stipulated herein is in accordance with the term and procedures of procuring Oil & Gas products from Russia Federation.

Terms of Negotiation
Origin: Russia Federation
Performance Bond : (Pb) 2% of the First Month Shipment Value Destination Aswp
Incoterms: Fob / Cif / Tto
Loading Port: Novorossiysk / Primorsk / Vladivostok / Rotterdam Ports
Payment Terms: Irrevocable Lc, T/t Telegraphic Transfer, Bg or Sblc Mt760, Mt103/23, Mt103
Inspection: Sgs, Ciq or Similar
Insurance: Paid by Seller, Covering 110% of Shipment Value

Fuel Oil Cst-180
Minimum Quantity: 10,000 Metric Tons Per Month Maximum Quantity: 500,000 Metric Tons Per Month
Price Cif: Gross Usd$290.00/ Usd$280.00 Net Cif
Fob Price: Gross Usd $280.00/ Usd $270.00 Net On Fob
Origin: Russia
Loading Port: Primorsk / Ust-luga/ Rotterdam

CI DIP AND PAY FOB ACCEPTED TERMS AND PROCEDURE

1. Buyer sends ICPO with full banking details CP, Passport Copy and Company registration.
2. Seller issues CI to Buyer.
3. Buyer Sign/endorse CI within 48 hours.
4. Seller issue to Buyer following Transaction Documents:
Tank Storage Receipt (TSR Valid 48 hours)
Authorization to inspect (DTA Valid 48 hours)
Authority to Verify (ATV)
5. Buyer upon receipt of the PPOP documents, buyer contact Tank farm for confirmation of the product and dip test within 48 hours. NOTE (BUYER'S FAILURE TO MAKE DIP TEST WITHIN 48 HOURS, BUYER WILL BEAR THE COST OF FURTHER EXPENSES)
6. Upon successful inspection, Buyer release payment for total product value.
7. Seller Transfer title and Trans-loading commence and issues NCNDA/IMFPA for commission payment.

Dear Sir/Madam I am Taufiqul Hakim Tsabit. We are direct with Russian refinery and we are ready to supply this product:
FUEL OIL CST-180
Minimum liftable quantity: 50,000 MT, Maximum: 400,000 MT.
Monthly price: Gross $350.00 USD / $340.00 USD Net on CIF
Gross $340.00 USD / $330.00 USD Net on FOB Origin: Russia
Commission: $5.00USD buyer side / $5.00USD seller side.

PRICE: USD 280/MT min order of 10K-500K MT per Month

Density @ 15 C max.... 991 kg/m3
Viscosity @ 50 C max.... 180 mm2/s
Water max... 0.5% (v/v)
Sulphur max... 3.5 % (m/m)
Flash Point min.... 60 0C
Pour Point max... 30 0C
Micro Carbon Residue max... 15 % (m/m)
Ash max.... 0.1 % (m/m)
Total Sediment Potential max... 0.1 % (m/m)
Vanadium max.... 200 mg/kg
Aluminium + Silicon max... 80 mg/kg
Zinc max... 15 mg/kg
Phosphorus max... 15 mg/kg
Calcium max... 30 mg/kg

FUEL OIL CST - 180
Quantity Minimum 10,000 MT Trial Shipment
Maximum 500,000 MT Monthly

FUEL OIL CST 180
Minimum Quantity: 50,000 MT
Maximum Quantity 1,000,000 MT
FOB Price: Gross 330 USD Net 320 USD
CIF Price: Gross 360 USD Net 350 USD

PROCEDURES DIP & PAY FOB
1. Buyer Issues ICPO alongside with TSA. And Company registration certificate
2. Seller issue CI. The buyer signed and return back along with the Commitment letter to perform. 3. Seller
issue below documents to the buyer as follow. Authorization to Sell and Collect (ATS & C)
Certificate of Origin
Statement of Product Availability
Commitment to Supply
Company Registration Certificate
4. Buyer and seller Agreed Negotiations on tanks extension to conducts Dip-test in Seller tank
with SGS official and receives fresh SGS report not less than 24 Hours. 5. Within 72 Hours, Buyer provides
TSR or Vessel storage for the injection of the product into Buyer
hired Tanks or Vessel. 6. Upon successful dip test and injection Buyer pays total cost of product MT103. 7.
Seller confirms Buyer payment; Seller pay commission to all involved mandate according to the
transactions. 8. Contract Begins with Rolls and Extensions for 12 months.)

WE HAVE ALSO FOB TANK TAKE OVER WORKING PROCEDURE, CIF, FOB TANK TO VESSEL PROCEDURE, FOB ROTTERDAM PROCEDURE, FOB TANK TO TANK PROCEDURE, TANK TO TANK/VESSEL TRANSACTION PROCEDURE, TABLE TALK MEETING PROCEDURE (TTM)
MT103, TT wire transfer. Any Buyer Mandate, Facilitator, Agent, Representative, Intermediary or Broker (who has no signed NCNDA with us) requesting to receive and/or to know the name and details of our Seller must first sign a standard NCNDA issued by the ICC that protects both sides; No information on past performances from the Seller is issued to any third party as it violates the Confidentiality Agreement signed between Seller and Buyers;
If ICPO is to issue the Buyer should copy the Procedures of Seller in full without deviation and without change as any change will render ICPO unacceptable to Seller.