Psm1500 Electrical Standard Tester

Electrical voltage tester
Contact ac voltage range: 80v to 500v
Long life of neon lamp, turn/off 50000 times or more, flash up to 20000 hours
Shell made of transparent plastics, impact-resistant, insulation voltage up to 1000v
The end with a hole for hanging up, hardness of blade head up to hrc52

40x26x22.5cm
N/g 7.56kg/9.93kg

Product description

The current booster is used on checking current transformer,to be the power source supply once current for current transformer or to be other 50Hz single phase current source device.



Technical index

Temperature

Humidit

Capacity: 20kVA

Specification

Weight: 75Kg

Allow long-term work on the rated current

Allowable overload 1.5 times,30 minutes of continuous work.



Feature

This PSLLQ is make up of input Winding(220V), output winding below 100A and CXRZ.

Output current indicated on the nameplate is defined the rated current that through winding allow to pass.When CX many circles, the rated current its permitted to pass through will inversely decline.

The value which ouput capcity divided by product of output current and each circle voltage was the biggest circle number allowing.



The current booster is designed to provide the primary current power supply for the current transformer when verifying the current transformer or as other 50HZ single-phase power equipment. The current booster for transformer verification is suitable for power departments such as power testing, power measurement, and power maintenance. The current booster is developed and produced according to the industry standard of transformer error testing, and is used as a current transformer to verify the primary current of the current transformer. The output current can be customized according to customer requirements. The lifter is equipped with casters for easy on-site movement.

Designed to test all types of relays.
6 x 30 a ac/dc
4 x 125 v ac/dc
1x 3 a /100v
1 x 0-265 v aux DC
8 binary inputs
4 binary outputs
Rs 232, ethernet port

Based on linear power amplifier techmology, the test set is highly accurate and is the economical solution for relay testing.


15 kg

GF112D is a single-phase handheld electronic meter test unit in accuracy class 0.1or 0.2, used for testing single phase electricity meters error on site. Wide measurement range from 1mA to 120A and 0 to 300V, and also can be used to test alternating current parameters - voltage, current, active power, reactive power, apparent power, harmonics, phase angle, power factor, frequency, energy etc.

Application
GC-7960 Organic Solvent Residue Tester applies to test of solvent residue on various printing films, laminated films, extrusion films, various drug-use films and sheets,.
Technical Indexes
1.Temperature Control:
Oven: room temperature +8~420°C, accuracy ±0.1°C (at 200°C)
Injector: room temperature +8~420°C, accuracy ±0.1°C (at 200°C)


-

Function:

Microcomputer Vertical Tensile Strength Tester, Computer paper tensile testing machine is widely used in paper, paperboard and other non-metallic materials tensile strength, elongation, tensile energy absorption determination test occasions.

Function:

To test the oxygen transmission rate (OTR) of packaging materials, such as plastic film, composite film, coextrusion film, aluminum-plated film, aluminum foil, infusion bag,etc.Widely used in the industries of food, pharmaceuticals, personal care, household, electronics and so on.

leak tester (0- -90KPA) for testing of the leakage of the packaging . meet the astm D3078 standard.
we have 3 different chambers 210*270mm 360*585mm 460*330mm.

Test different types of MU in electronic transformer input, magnetic transformer
input and electromagnetic transformer input, integrate with reliable analog output
and high-speed digital signal process. Support GPS, IRIG-B and PPS timing
method, 0.05% high accuracy analog output and strong abnormal SMV function.
POM2-3333 can also test SMV accuracy, data process delay, clock synchronization,
time accuracy, abnormal SMV and SMV time dispersion,etc items.
Functions:
Background software can do programming of the electrical wiring graph
and configuration and fault simulation of protection relays, analog the
setting of specifications of MU, digital terminal devices and
specifications setting of fault and fault points. The entire testing and
operation process can be controlled by the background software.
Two kinds of test modes ensure absolute time delay parameters of MU
and complete the SMV response time test accurately.
The timing function makes tests on MU's clock synchronization and time
accuracy, etc time characteristics.
SMV analysis analyzes SMV and GOOSE messages output by MU in
real-time.
It tests the MU's self-checking and fault process by SMV quality bit,
signal remark in GOOSE or the defined warning information in GOOSE.
The electric quantity in SMV can display the wave, binary status and
previous displacement time.
The SMV and GOOSE abnormal output by MU can be judged and
analyzed by multi abnormal SMV detection systems.
The accurate timing remark on SMV can statistic and evaluate the time
dispersion of MU's SMV.