Custom Adss Tension Clamp

ASS Tension Clamp
The ADSS tension clamp is designed to securely connect ADSS fiber optic cables to poles or towers. It uses an armor rod to protect and cushion the cable, helping to prevent damage. Thanks to its preformed wire design, the clamp distributes stress evenly, so the cable isnâ??t over-strainedâ??this helps maintain the long-term performance of the cable system. Made from either aluminum-clad steel or galvanized steel wire, the clamp is typically used for ADSS cable installations with spans under 100 meters, such as at tension towers, angle towers, mid-span joint towers, and terminal towers.

Composition: twisted wire, thimble, PH-type shackle, U-type shackle etc.

Purposes: support all strain, make ADSS cable connect the strain pole and tower.

Features:
Preformed wire connect the pole and tower by thimbles etc. link fitting, afford the load of the transmission line.

Grip strength not less than cable 95%RTS in case that not more than lateral pressure of the cable

E xcellent aluminum clad steel improve the mechanical and resist-corrosion function, extend life.

Corrosion-resistant materials such as aluminum or plastic to ensure durability and longevity.

Gripping mechanism that securely holds the cable without causing damage.

Tensioning mechanism that allows for adjustment of the cable tension.

Insulating material to protect the cable from electrical currents.

Suitable for use with a range of cable diameters.

Easy installation and maintenance.

Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods

ADSS with The DN Short-span Tension Clamp
ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure.
Tension Clamp
ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. The ADSS tension clamp is typically made of corrosion-resistant materials such as aluminum or plastic and is available in different sizes to fit various cable diameters.

OEM ADSS Tension Clamp

Pre-twisted tension clamps are also known as pre-twisted dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC.

Pre-twisted dead end is a tension clamp that plays an important role in ADSS/OPGW transmission lines. Dead-end fiber optic cable clamps are used to connect ADSS/OPGW/OPPC to overhead towers or poles.

The unique design of the pre-fabricated tension clamps not only simplifies installation, but also ensures a secure cable connection. Dead-end cable clamps provide superior performance in protecting ADSS/OPGW/OPPC cables from stress point damage and preventing signal degradation during transmission.

Pre-twisted tension clamps and pulling dead-end cable clamps used on conductors and ground wires are similar in appearance, but the specifications, raw materials, and strength requirements of the two types of pulling dead-end cable clamps are quite different.

Although there are different design standards in different countries, we can make OEM according to customers' requirements.

ADSS Preformed Short Span Tension Clamp
Tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors.

China ADSS Tension Clamp
ADSS tension clamps are designed to hold conductors and strands evenly to prevent conductor deformation. This product is designed for bare and stranded conductors and is recommended for use with plastic sheathed conductors. At the same time, the tension clamp can withstand at least 95% of the rated breaking strength of conductors and strands, and is made of high-strength materials.
Composition: twisted wire, rubber insert, cast aluminum shell, right-angle shackle, U-shackle.
Purposes: supporting cableï¼?make the ADSS hang on the tower.
Features:
1. Component: preformed wire, rubber inserting, casting aluminum shell, right angle shackle, U shackle etc.

2. Usage: supporting,make ADSS cable hang on the pole and tower.

3. Features: a, stress on average, no concentration stress, protect cable better and increase the stiffness of cable in the mount point. b, good dynamic stress. It can provide enough grip strength(10%RTS) c, rubber inserting make abrasion low. d. excellent aluminum alloy improve the mechanical and resist-corrosion function, extend life.
Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods..

Preformed tension clamp is also called preformed dead end or dead end cable clamp. The raw material of preformed tension clamp is aluminum clad steel wire or galvanized steel wire, For communication ADSS optical fiber, OPGW cable and OPPC.

The unique pre-formed tension clamp design not only simplifies the installation but also ensures the safety of the cable connection. Terminal cable clamps provide excellent performance to protect ADSS/OPGW/OPPC cables from stress points and prevent signal drops during transmission.

What is the raw material of the pre-formed tension clamp
The raw material of the prefabricated tension clamp is aluminum-clad steel wire or galvanized steel wire.

What is the purpose of prefabricated tension clamps
Prefabricated tension clamps are designed to connect ADSS/OPGW/OPPC to overhead towers or poles.

What are the types of prefabricated tension clamps
The preformed tension clamp and guy wire dead end grips used on the conductor and earth wire look alike in shape, but there are really big differences in the specification, raw material, and strength requirement of the two types of guy grips.

1. Dead-end for short span ADSS
Dead-end for short span ADSS with a small tension clamp material for aluminum-clad gang wire, mainly used for the corner towers, the middle of follow-tower and connecting the terminal tower, the largest installation file from the less than 100 meters.

2. Dead-end for medium/long span ADSS
Dead-end for medium span ADSS in tension and large tension clamp material for aluminum-clad steel wire, mainly used for files larger than 100 meters away from the corner tower, the middle tower and Terminal Tower successive connection.

As an experienced manufacturer and supplier of preformed tension clamps, Boersen Photoelectric is able to OEM to customer specifications. If you have any questions, please feel free to contact us.

ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. The clamp is typically made of corrosion-resistant materials such as aluminum or plastic and is available in different sizes to fit various cable diameters.



ADSS Tension Clamp

Composition: twisted wire, thimble, PH-type shackle, U-type shackle etc.

Purposes: support all strain, make ADSS cable connect the strain pole and tower.

Features:
Preformed wire connect the pole and tower by thimbles etc. link fitting, afford the load of the transmission line.

Grip strength not less than cable 95%RTS in case that not more than lateral pressure of the cable

E xcellent aluminum clad steel improve the mechanical and resist-corrosion function, extend life.

Corrosion-resistant materials such as aluminum or plastic to ensure durability and longevity.

Gripping mechanism that securely holds the cable without causing damage.

Tensioning mechanism that allows for adjustment of the cable tension.

Insulating material to protect the cable from electrical currents.

Suitable for use with a range of cable diameters.

ADSS with The DN Short-span Tension Clamp
ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure.
Tension Clamp
ADSS (All-Dielectric Self-Supporting) tension clamp is a device used to attach and support ADSS cables to poles or towers in overhead fiber optic cable installations. It is designed to grip the cable without damaging it while also providing the necessary tension to keep the cable taut and secure. The ADSS tension clamp is typically made of corrosion-resistant materials such as aluminum or plastic and is available in different sizes to fit various cable diameters.
Composition: twisted wire, thimble, PH-type shackle, U-type shackle etc.

Purposes: support all strain, make ADSS cable connect the strain pole and tower.

Features:
Preformed wire connect the pole and tower by thimbles etc. link fitting, afford the load of the transmission line.

Grip strength not less than cable 95%RTS in case that not more than lateral pressure of the cable
E xcellent aluminum clad steel improve the mechanical and resist-corrosion function, extend life.
Corrosion-resistant materials such as aluminum or plastic to ensure durability and longevity.
Gripping mechanism that securely holds the cable without causing damage.
Tensioning mechanism that allows for adjustment of the cable tension.
Insulating material to protect the cable from electrical currents.
Suitable for use with a range of cable diameters.
Easy installation and maintenance.

Technical requirements: meet the DL / T 766-2003 ADSS with the preformed helical fittings technical requirements and test methods

ADSS Cable Suspension Clamp


ADSS Suspension Clamps, also known as Prefabricated Suspension Clamps or AGS Suspension Clamps, offer a full range of aluminum cladding, rubber, armored clamps, bolts, and nuts to support and protect ADSS/OPGW cables from bending damage. Armored Clamp Suspensions can be customized for different gauges, various cable sizes, wire raw materials, and armored clamp suspension design options to precisely match the clamping strength, span, and cable type requirements, including Dual Suspension Clamps, AGS Suspension Clamps, Cushion Clamp Suspension Clamps, ADSS Cable Suspension Clamps, and OPGW Suspension Clamps. adss Suspension Clamps are specifically designed for use in applications where there is a large drop in long spans, river crossings, or on hills. The double suspension clips have a vertical breaking load of 100kn. as your OEM partner for prefabricated suspension clips, we can help you save money and stay competitive. Whether it is standard, customized or different types, Huaneng Clamp Suspension offers quality solutions for all market needs.

ADSS Downlead Clamp
DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips.

Downlead Clamp
DownLead Clamp, also called lead wire pads, are fixed to poles or strain relief towers to guide fiber optic cables up or down through them. According to the application, the lead wire clips include tower lead wire clips, pole lead wire clips, ADSS lead wire clips and OPGW lead wire clips.

The downlead clamp consist of a stainless steel band and a rubber part. The stainless steel band is used to fix the rubber clip on the pole. At the same time, the rubber part fixes the optical fiber. This way, the fiber does not shake and at the same time reduces damage caused by friction.

The lead wire clamps for towers have a different structure than the lead wire clamps for poles. The clamps consist of steel brackets, bolts and nuts, and rubber parts. The bolt secures the lead clip to the tower.

Compared to other lead clip manufacturers, Huaneng offers the end user a wide range of lead clip design options. huaneng lead clips can be custom manufactured with a wide range of cables, materials and different connection options.