Normally Closed Solenoid Gs021600V + Ccp230M

Plunger Type Pumps, Hydraulically Actuated Diaphragm Type Pumps, Mechanically Actuated Diaphragm Type Pumps, Solenoid, Operated Diaphragm Dosing Pumps, Complete Skid Mounted Dosing Systems, Chemical Process Pumps, Seal free Magnetic Drive Pumps, Progressive Pumps, Y Type Strainers, Pulsation dampners, etc.

Design Features:
Horizontal, Centrifugal, Monobloc (pump & motor have been combined to form a single unit) type pump fitted with single stage closed Impeller in Volute Casing having axial end suction and vertical centerline delivery.
No fear of motor burning due to wide operating voltage range and Non-overloading power characteristics at any operating point.
Advantage of mounting space saving due to elimination of base plate, coupling and coupling guard.

Custom-built Design:
Pumps with variable supply voltage / frequency and different material of construction can be offered on request.

AIR Circuit Breaker Spares And Parts
Str 38 S , Motor Spring Charges , Coil , Shunt Closing Trip Etc

* 200 Amps Normally Open 24VDC with auxiliary switch
* Double coils
* Customized available

Cable Standard
Generally conforms to IS 694:2010, IEC60228, BS 6004

Silent Features
- Special heat resistant insulation
- Higher current carrying capacity
- Fine copper wires
- Highly thermal stable insulation
- High electrical conductivity
- Long Life
- Excellent mechanical & electrical properties

Technical Data
Operating Temp : -10�?�°C to max.+90�?�°C
Nominal voltage : 1.1 KV
Test voltage : 3.0 KV

Standard Packing
Coils 100, 200, 500 and 1000m.

Conductor
Bare Copper class1 or class-2 as per IS:8130,
IEC 60228

Insulation
PVC FR, FRLS,HRFR,ZHFR as per IS:5831-1984

Color
Black, Green, Yellow/green or as per customer requirement

Application
Neskeb - Earth : Installation in surface mounted or embedded
conduits, or similar closed systems

SANDI SERIES charging module is for electric vehicle charging station. With single-phase non neutral conductor AC input, it has the advantages of high efficiency, high power density and low harmonic.
Functional details
1. Hot plug
Plug technology is applied to the charging module to provide convenience for installation and maintenance. The access of the charging module to the system shall not disturb the output voltage of the system.
2. Advanced current sharing technology
Under constant voltage working mode, the charging modules can share current automatically within 10S, with degree of unbalance less than �±0.5A.
3. Control of input limited power
Refer to Fig. 1-10 for the relation between the output power and input voltage of the charging module. When the input voltage is within 360 Vac ~ 450 Vac (return difference is less than 5V), the module can output the maximum power of 20 KW; when the input voltage is within 260 Vac ~ 320 Vac, the module can still work normally under limited power mode.
4. Control of output constant power
When there is a rated input voltage, the output power of the module is 20 KW. Refer to Fig. 11 for the relation between the output voltage and the output current of the module.
The SD75050 module uses two operating modes with output voltage ranges of 50 to 750V.
The module only selects the operating mode based on the value of the received demand voltage, and does not select the operating mode based on the actual output voltage.
5. Temperature limited power
6. Regulation of output current limiting point
8. Regulation of output voltage
The output voltage of the module can be regulated constantly through the external monitoring module, with regulation range of 50Vdc ~ 750Vdc and minimum regulation step of 0.1 Vdc.
9. Fan control
The built-in processor of the module can regulate the speed of the fan according to the internal temperature and output current of the module.
10. Protection of input overvoltage/ voltage shortage
11. Output overvoltage protection
The overvoltage protection point is 260Vdc ~770Vdc (�±10 Vdc). Default is 778Vdc.The module can be started after manual intervention upon overvoltage protection.
12. Over-temperature protection
The environmental over-temperature protection point is 80�°C. When the DC panel has a temperature over 100�°C, the module will stop working; when the DC panel has a temperature below 90�°C, the module will automatically work again.
13. Protection of internal bus fault
When the internal bus voltage of the module is beyond the overvoltage/ voltage shortage protection point, the module will be powered off automatically. At this time, there is no output from the module and the fault indicator light is on.
14. Short circuit protection
In case of short circuit of the module, it will be subjected to protective shutdown and the red indicator light of the panel is on, and this condition will be transmitted to the monitor of the "module fault".

- Bar Connector
- Terminals
- Auto Connector
- EV Charging Connector
- Mobile Connector