Chopped Glass Fiber For Concrete

40x60*40 CM Fiber Glass

The basalt fiber roving of our company adopts the new tank kiln method and 2400 hole large leakage plate to form basalt roving products With a series of advantages such as high strength, large modulus, good temperature resistance, good chemical corrosion resistance and good electrical insulation, basalt is produced with homogenized basalt raw materials, with excellent performance, stable quality and small dispersion coefficient.
Basalt fiber roving is a new material to replace glass fiber and carbon fiber

Glass fiber mesh cloth alkali resistant and crack resistant plastering of internal and external walls on construction site

Fiberglass chopped strands
Chopped Strand products are used as reinforcement in the thermoplastic such as engineering plastics and in thermosetting resins,such as polyester and phenol resin.Thermoplastics are used a wide range of industries,including the automotive,electrical and electronics industries.Also it is easy to control the cost and is the most ideal choice of the current constructional fibers.
Fiberglass chopped strand used as reinforcement for thermoplastic PA, PBT,PET,PP,ABS,AS,etc.Its surface was painted by silane coupling agent(silane treatment).Widely used in automotive industry,household products,pump casing,anticorrosion chemistry and exercise equipments.

Yixing Product Characteristics:
1.Brand name:Yixing Fiberglass chopped strands
2.Model number:yxcs8001
3.Filament diameter: 13um etc
4.Chopped length: 3mm,4.5mm,6mm,12mm,18mm etc We can produce some customized products with special requirement according to your demand
5.Excellent clustering property,few filoplume.
6.Good dispersibility and fluidity property
7.Compatible well with basic resin,no fiber out product surface,good surface quality
8.Good strand integrity,low static,low fuzz,excellent mold flow ability
9.Quick wet-out by resin,excellent technical&mechanical properties
10.Water ratio:<0.10%.

Common specifications:
1. Length: 3mm,6mm,8mm,10mm,12mm,18mm,20mm;
2. Filament diameter: 10um,11um,12um,13um;
3. Inner packing: Plastic bag inside,then Kraft paper sack outside
4. Shipment packing: Directly on container or 40 bags per pallet.
5. Color: White.


25kg per bag,shrink film bag packing then in carton.or according to your request.

We can produce different lengths 6mm, 12mm, 18mm and 24mm

Usage:
Glass fiber is suitable for use in waterproof plasters, cement-sand screeds, monolithic filling of external and internal walls, and structural thermal insulation.
In industrial and housing construction. Recommended for the production of foam concrete paving slabs, and concrete plates. Ideal for underfloor heating systems.

Glass;Fiber Chopped Strand Mat Description
E-Glass Fiber chopped strand mat is a kind of non-woven glass fiber reinforced material, which is made by chopping glass fiber first, then be settled down non-directional and uniform, adding some powder or emulsion binder. It is mainly used for hand laying up process ;and laminating process, ;easy to process, with excellent ;forming performance. Chopped strand mat ;can be saturated with resin ;fast, ;with high ;transparency,;at the same time, uniform fiber ;makes the products ;smooth on surface ;during the lamination process,good performance on coating model.

Glass;Fiber Chopped Strand Mat Characteristics
1)Weight is evenly distributed per gram
2)Saturated fast,
3)Bubbles easy ;to be eliminated,
4)High transparency
5)Excellent coating model;performance
6)Less;consumption of ;resin.

Glass ;Fiber Chopped Strand Mat Application
Mainly used for;tank, winding pipe;products,;the surface layer;of the glass products. Can improve the;surface;corrosion resistance and;enhance the;compressive strength for finished fiber glass products,;prevent leakage,;prolong the service life.
Hand laying up;type glass;fiber mat ;is mainly used for;hand laying up ;product;with complex geometric curve,;it is with excellent coating model performance,rapid resin;saturated speed, canimprove the strength and;corrosion resistance performance for finished glass fiber mat products.

Glass;Fiber Chopped Strand Mat Technical Parameters
ModelTypeMass per Unite Area(g/m2)WidthLinear density(172;m) Loss on lgnition(%)
WDQ150 E-Glass 150 104011-13 1.5%-8.5%
WDQ225 E-Glass 225 1040 11-13 1.5%-8.5%
WDQ280 E-Glass 280 1040 11-13 1.5%-8.5%
WDQ300 E-Glass 300 1040 11-13 1.5%-8.5%
WDQ450 E-Glass 450 1040 11-13 1.5%-8.5%
ZDQ280 C-Glass 280 1040 13-17 3.0%-6.0%
FDQ300 CP-Glass 300 1040 13-17 3.0%-6.0%



Glass;Fiber Chopped Strand Mat Packaging
Packing Quantity
Plastic Film+ Carton Box+Pallet About 10tons/ 20 ft
23tons/ 40ft


Plastic Film+ Carton Box+Pallet About 10tons/ 20 ft
23tons/ 40ft

Fiberglass chopped strands
Chopped strand products are used as reinforcement in the thermoplastic such as engineering plastics and in thermosetting resins, such as polyester and phenol resin.Thermoplastics are used a wide range of industries, including the automotive, electrical and electronics industries.Also it is easy to control the cost and is the most ideal choice of the current constructional fibers.
Fiberglass chopped strand used as reinforcement for thermoplastic pa, pbt, pet, pp, abs, as, etc.Its surface was painted by silane coupling agent(silane treatment).Widely used in automotive industry, household products, pump casing, anticorrosion chemistry and exercise equipments.

Yixing product characteristics:
1.Brand name:yixing fiberglass chopped strands
3.Filament diameter: 13um etc
4.Chopped length: 3mm, 4.5mm, 6mm, 12mm, 18mm etc we can produce some customized products with special requirement according to

Your demand
5.Excellent clustering property, few filoplume.
6.Good dispersibility and fluidity property
7.Compatible well with basic resin, no fiber out product surface, good surface quality
8.Good strand integrity, low static, low fuzz, excellent mold flow ability
9.Quick wet-out by resin, excellent technical&mechanical properties
10.Water ratio:<0.10%.

Common specifications:
1. Length: 3mm, 6mm, 8mm, 10mm, 12mm, 18mm, 20mm;
2. Filament diameter: 10um, 11um, 12um, 13um;
3. Inner packing: plastic bag inside, then kraft paper sack outside
4. Shipment packing: directly on container or 40 bags per pallet.
5. Color: white.


25kg per bag, shrink film bag packing then in carton.Or according to your request.

Fiberglass Reinforced Plastic grating is made by interlacing glass fibers and molded by
resin casting. With its many rectangular and square spaces, it provides two-dimensional
homogeneous mechanical characteristics.
The typical size of the product is - 1220 x 3660 mm. However, it is available in different mesh
sizes and thickness
- Advantages
- Easy to assemble
- High Load-bearing capacity
- Easy to install and maintain / repair
- Durable in harshest environments
- Suitable for ventilation and natural lighting