Dead End Clamp

Place of Origin -Hebei, China
Product Name -Dead End Clamp
Certificate -CE,IS9001,test report
OEM/ODM -Offer
Cable Size -4X16~50mm2

Dead end grip for OPGW


Component

Inner armor rods, outer armor rods, thimble, U-shaped hanging loop, Extensioe Rods, bolt, nut, etc.

Characteristic



1. Stress is distributed equally, without stress focus. It can protect optical cabl-es very well.

2. Under the condition of not exceeding the intensity of cable's side pressure, it has higher grip power for the cable, and can support higher tensile force.

3. The grip power for the cable is not less than 95% of rating's pulling resisting intensityof the optical cable, completely satisfying the needs of setting up the cable.


Conditions For The Usage

1. Terminal poles/towers;

2. Corner poles/towers;

3. Dead-end poles/towers;


Intensity

According to the requirement of customers, 30kN, 70kN, 100kN, 120kN, etc, can be supplied.


Select Chart

Model Grip(KN) Length of Inner Armor Rods(mm) Length of Outer Armor Rods(mm) Estimated Weight(KG) Color
ONZ-60-* * 60 1900 1500 2.9 Yellow
ONZ-70-* * 70 2000 1600 3.5 Yellow
ONZ-80-* # 80 2200 1700 4.2 Yellow
ONZ-90-* # 90 2400 1800 4.3 Yellow
ONZ-100-* # 100 2500 1900 4.5 Yellow
ONZ-120-* # 120 2600 2000 5.0 Yellow
Note: representing the outer diameter of the optical cable (mm).

OEM ADSS Tension Clamp

Pre-twisted tension clamps are also known as pre-twisted dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC.

Pre-twisted dead end is a tension clamp that plays an important role in ADSS/OPGW transmission lines. Dead-end fiber optic cable clamps are used to connect ADSS/OPGW/OPPC to overhead towers or poles.

The unique design of the pre-fabricated tension clamps not only simplifies installation, but also ensures a secure cable connection. Dead-end cable clamps provide superior performance in protecting ADSS/OPGW/OPPC cables from stress point damage and preventing signal degradation during transmission.

Pre-twisted tension clamps and pulling dead-end cable clamps used on conductors and ground wires are similar in appearance, but the specifications, raw materials, and strength requirements of the two types of pulling dead-end cable clamps are quite different.

Although there are different design standards in different countries, we can make OEM according to customers' requirements.

OPGW Preformed Double Tension Clamp
Preformed tension clamps are also named preformed dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC.
A preformed dead end is a tension wire that has an important role in ADSS/OPGW transmission lines. Dead-end cable clamps are designed to connect ADSS/OPGW/OPPC to overhead towers or poles.

Preformed Tension Clamp
Preformed tension clamps are also named preformed dead-end or dead-end cable clamps for communication ADSS fiber, OPGW cable or OPPC.
A preformed dead end is a tension wire that has an important role in ADSS/OPGW transmission lines. Dead-end cable clamps are designed to connect ADSS/OPGW/OPPC to overhead towers or poles.
The unique pre-formed tension clamp design not only simplifies installation, but also ensures a secure cable connection. Dead-end cable clamps provide superior performance to protect ADSS/OPGW/OPPC cables from stress point damage and prevent signal degradation during transmission.
Pre-formed tension clamps for conductors and grounds are similar in appearance to pulling dead-end clamps, but the specifications, raw materials and strength requirements of the two types of pulling clamps do differ significantly.
Although there are different design standards in different countries, we can OEM to customer requirements.
As an experienced manufacturer and supplier of preformed tension clamps, Seinei understands the standards, the manufacturing process and understands your needs.

If you have any questions, please feel free to contact us.