Motorcycle Starting System Simulator

Igniter (cold starting aid unit)

Motorcycle igniter (cold starting aid unit)
Nickname: shilan holy flame
Model no.: sh3330
A) function: shilan holy flame possesses super starting auxiliary function. Designed for the purpose of resolving the difficulties in electrical starting and cold starting of motorcycles, the shilan holy flame can produce an extremely powerful voltage while working, and it adds to the voltage produced by the original ignition charging coil at the same time, promptly increasing the multiplied igniting energy. Thus, the engine can be started by a touch no matter in a freezing environment (-20 degree celsius) or under the weather of normal temperature. After starting, the holy flame stops working, and the engine remains in its original circuit. The holy flame can also be a direct substitute for the original igniting charging coil.
B) models of motorcycles: applied for a variety of cdi ignition models with spark coil and ignition charging coil, such as ch-125, gy6-125, cb-125t, fxd-125, zj-125.
C) technical parameters:
Working voltage: dc6-12v
Working current: 200-450ma
Output voltage: dc80-220v

1)stem material : carbon steel & electrophoresis
2)shell material : pp plastic
3)mirror material : float glass
4)curve radius :1200mm
5)stem length : 9.5*180mm
6)packing : 40 pairs/ctn
7)g.W/n.W :22.8kg
8)measurement : 57*31.5*54.5 cm

1)packing : 40 pairs/ctn
2)g.W/n.W :22.8kg
3)measurement : 57*31.5*54.5 cm

Specification of by-3
1)stem material : carbon steel & electrophoresis
2)shell material : pp plastic
3)mirror material : float glass
4)curve radius :1200mm
5)stem length : 10.5*190mm
6)packing : 40 pairs/ctn
7)g.W/n.W :19.5kg
8)measurement : 41.5*32*51cm



1. Packing: 40 pairs/ctn
2. G. W/n. W: 19.5kg
3. Measurement: 41.5*32*51cm

Model no: sd1290b
A) Functions: adopting high-tech light boosting technology, shilan holy light combines the loss reduction function and light boosting circuit into one unit. It can reduce the circuit wastage, and at the same time make good protection for the power switch, headlight switch and the main circuit. It independently boosts the light of the front headlight with stable brightness. Whether the vehicle has started or not, it can achieve a strong light boosting effect once the headlight is turned on. The light can be boosted by more than 200%.
B) Motorcycle models: applied for the 12v three-phase power generating models with headlight electricity provided by storage batteries.

Motorcycle three-phase rectifier

Motorcycle three-phase rectifying regulator (dc 12v)
A) function: switch type design with quick charging, good regulating and oil saving. It can prolong the life span of the storage battery.
B)work principle: generally the motorcycle rectifying regulators use the design of short circuit discharging type. When the voltage of the storage battery reaches its rated voltage point, the control circuit of the rectifying regulator starts to work. Two scrs (silicon controlled rectifiers) simultaneously carry out the short circuit discharging to the positive and negative half-wave voltage (the scr will consume a large amount of electricity power and waste energy when it discharges short-circuitedly), and they weaken the regulating effects of the charging currents. However, the switch-type rectifying regulators use the design of switch type. When the voltage of the storage battery reaches its rated voltage point, the control circuit of the rectifying regulator starts to work. It orders the cutoff of the charging currents to achieve the regulating effects. The charging stops. The rectifying regulator itself consumes only some weak control currents. The magneto load is reduced, and the oil consumption drops. Thus the oil is saved to a degree of 20%.
C)major models: s132, 133, 134, 135, 136, 137, 138, 139
S132 is applied for zy-125 (lingying).
S133 is applied for gs-125 (suzuki king/lingmuwang).
S134 is applied for gs-125 (suzuki king/lingmuwang).
S135 is applied for gn-125 (haojue).
S136 is applied for cbt-125 (honda king/bentianwang).
S137 is applied for ch-125 (big shark/dasha).
S138 is applied for cm-125.
S139 is applied for xv-125.
Note: for other motorcycle models please use different models according to different plug types.