Nickel Rod

Standard
ASTM B160 / ASME SB160


Dimensions
ASTM, ASME and API


Round Bars Size
10 mm To 100 mm Dia in 100 mm TO 6000 mm Length.


Round bar Diameter
3-~800mm


Hex Bar size
2-100mm A/F


Square bar size
4 to 100mm


Flat bar Thickness
2 -100mm


Flat bar Width
10 to 500mm


Length
3 to 6 meter, Custom Cut Lengths


Form
Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wiremesh, Billet, Ingot, Forging Etc.,

Inconel 600 is a nickelbase alloy with excellent carburization, and good oxidation resistance at elevated temperatures.
The alloy is widely used in the heat treating industry.
600 alloy has useful resistance to dry Cl2 and HCl gases at moderately elevated temperatures.
Alloy 600 is not suggested for use at red heat when sulfur is present due to elevated nickel quantities.

Grades 200 and 201 nickel are normally preferred for handling concentrated, high temperature caustic.
However, when sulfur compounds are present as well, or for ammonium hydroxide service,
600 alloy is suggested. 600 alloy is subject to stress corrosion cracking in hot, concentrated caustic alkalies.
To avoid stress corrosion cracking, the 600 alloy fabrication should be fully stress relieved prior to use.
A minimum treatment of 1650°F for 1 hour is suggested, but 1800-1850°F for 1 hour preferred.

Name Nickel Bar / Nickel Rod
Standard ASTM, ISO, JIS, GB
Material Ni200, Ni201, Inconoly, Inconel, Hastelloy etc.
Dimension Dia. 6 ~ 200 mm
Condition Annealed
Application Chemical Industry, Petroleum Industry, Nuclear Power Industry, Marine Industry, Electrolytic Industry etc.
Certificate ISO 9001:2008, MTC or The Third Party

Solder rods for nickel-based dental constructions, free of toxic components; excellent properties; free samples for tests and evaluation

Inconel 718 alloy is a precipitation-hardening nickel-chromium-iron alloy containing niobium and molybdenum. It has high strength at 700 C, good toughness and corrosion resistance in high and low temperature environments. The delivery condition can be solution treated or precipitation hardened.
No matter in high temperature or low temperature environment, Inconel718 alloy has excellent resistance to stress corrosion cracking and pitting corrosion. Inconel718 alloy is especially excellent in oxidation resistance at high temperature.
Inconel 718 is a high-temperature alloy with excellent corrosion resistance and high-temperature strength, commonly used in aerospace, energy, chemical, and marine engineering fields. The following are the common national standard designations for Inconel 718:
US standard designation: UNS N07718, AMS 5662, AMS 5663, AMS 5664, AMS 5832, AMS 5962, AMS 5596, ASTM B637, ASTM B670, ASTM B906, ASTM B983, ASTM B655, ASTM B751, ASME SB637, ASME SB670, GE B50TF15, GE B50TF14, GE B50TF14E, GE B50A714, SEW 555. European standard designation: EN 2.4668, EN 10216-5, EN 10250-4, EN 10263-4, EN 10269, EN 10302, EN 10305-1, EN 10308, EN 10312, EN 10314, EN 12266-1, EN 13480-5, EN 13544-2, EN 14456. German standard designation: DIN NiCr19NbMo, DIN 2.4668, DIN 17742, DIN 17754. French standard designation: AFNOR NC19FeNb, AFNOR NC 19 Fe Nb. British standard designation: BS HR 51, BS HR 52, BS HR 601, BS HR 602, BS HR 605, BS HR 506. Russian standard designation: �?�?�¡�¢ �­�?678, �?�?�¡�¢ 5632-72, �?�?�¡�¢ 9940-81, �?�?�¡�¢ 14955-77, �?�?�¡�¢ 22897-86.
Note: Standard designations may vary depending on the different standard organizations or countries.

We can provide the following the form:Inconel718 alloy coil; Inconel718 alloy strip;Inconel718 alloy plate; Inconel718 alloy sheets; Inconel718 alloy tube; Inconel718 alloy pipe;
Inconel718 alloy flat; Inconel718 alloy bar

BS:HR 51;DIN:NiCr19NbMo;UNS:N07718;W.Nr:2.4668

1. Steam turbine
2. Liquid fuel rockets
3. Low temperature engineering
4. Acid environment
5. Nuclear engineering.

Monel 400 (UNS N04400, NCu30) The structure of Monel 400 alloy is a high-strength single-phase solid solution. It is a corrosion-resistant alloy with the largest amount, the widest application and excellent comprehensive performance. This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas medium, and also has excellent corrosion resistance to hot concentrated lye. At the same time, it is also resistant to corrosion by neutral solutions, water, sea water, atmosphere, organic compounds, etc. An important feature of this alloy is that it generally does not produce stress corrosion cracks and has good cutting performance.
The alloy has excellent corrosion resistance in fluorine gas, hydrochloric acid, sulfuric acid, hydrofluoric acid and their derivatives. At the same time, it is more corrosion resistant than copper-based alloys in seawater.
â?² Acid medium: M400 is corrosion-resistant in sulfuric acid with a concentration of less than 85%. M400 is one of the very few important materials in durable hydrofluoric acid.
â?² Water corrosion: M400 alloy not only has excellent corrosion resistance under most water corrosion conditions, but also pitting corrosion and stress corrosion are rarely found, and the corrosion rate is less than 0.25mm/a.
â?² High temperature corrosion: The maximum temperature of M400 continuous work in the air is generally around 600�°C, and in high temperature steam, the corrosion rate is less than 0.026mm/a.
â?² Ammonia: Due to the high nickel content of Monel 400 alloy, it can resist corrosion under anhydrous ammonia and ammoniation conditions below 585�°C.
American standard designation: UNS N04400, Specifications: ASTM B164, ASTM B127, ASTM B165, ASTM B725, ASTM B163, ASTM B366, ASTM B164, ASTM B564, ASTM B164, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544, AMS 4574, AMS 4675, AMS 4730, AMS 4731, AMS 4544.
German standard designation: W.Nr. 2.4360, Specifications: DIN 17743, DIN 17750, DIN 17752, DIN 17753, DIN 17754.
Japanese standard designation: JIS NW4400, Specifications: JIS G4902, JIS G4903, JIS G4904, JIS G4905, JIS G4906, JIS G4907.
Chinese standard designation: NS111, Specifications: GB/T 2054, GB/T 2055, GB/T 2056, GB/T 2057, GB/T 2058, GB/T 2059, GB/T 2060, GB/T 2061.

We can provide the following the form:Monel alloy 400 coil; Monel alloy 400 strip;Monel alloy 400 plate; Monel alloy 400 sheets; Monel alloy 400 tube; Monel alloy 400 pipe;
Monel alloy 400 flat; Monel alloy 400 bar

GB: NS111 ;JIS:NW4400;UNS:N04400;W.Nr:2.436

This alloy is mainly used for
1. Seamless water pipes and steam pipes in power plants
2. Sea water exchanger and evaporator
3. Sulfuric acid and hydrochloric acid environment
4. Crude oil distillation
5. The pump shaft and propeller of the equipment used in seawater
6. The nuclear industry is used to manufacture equipment for uranium refining and isotope separation
7. Manufacture of pumps and valves used in the production of hydrochloric acid equipment

We put forward a high quality of assortment of Nickel which is available
in many forms including LME registered and non registered cathodes,
cut cathodes, briquettes, pellets, disks, shots, granules, foil, powder,
flakes, sheet, wire, mesh, spheres, “evaporation slugs”, and rods.
Nickel is a silvery white metal that takes on a high polish. It is hard, malleable, ductile,
somewhat ferromagnetic, and a fair conductor of heat and electricity

Nickel is a hard, ductile and ferromagnetic metal that is highly polished and resistant to corrosion. Nickel is a ferrophilic element. The core is mainly composed of iron and nickel elements. In the crust, iron-mafic rocks contain more nickel than silico-alumina rocks. For example, peridotite contains 1,000 times more nickel than granite, and gabbro contains 80 times more nickel than granite.
On October 27, 2017, the World Health Organization's International Agency for Research on Cancer released the preliminary list of carcinogens for reference. Nickel compounds are in the list of carcinogens, metal cobalt, metal nickel and 66-67% nickel, 13-16% nickel. Chromium and 7% iron alloy powders for implantation of foreign bodies in vivo, nickel metal and nickel alloys are on the list of Class 2B carcinogens.
Niclkel powder is mainly used in atomic energy industry, conductive materials, battery electrode materials, chemical catalysts, hard surface spray welding, special welding rods, porous filter materials, magnetic materials, contact materials,
Diamond tools, automobile manufacturing, cemented carbide, high-temperature high-strength alloys and other powder metallurgy fields.

Application Nickel plating is used in various alloys such as new silver, Chinese silver, German silver; for coins, electronic boards, storage batteries; magnets, lightning rod tips, electrical contacts and electrodes, spark plugs, mechanical parts; catalysts for the hydrogenation of oils and other organic substances. See also Raney nickel. Manufacture of monel metal, stainless steel, heat-resistant steel, heat-resistant and corrosion-resistant alloys, nickel-chromium resistance wire; alloys for electronic and space applications. Use Nickel is used in various alloys such as German silver, monel and nickel-chromium alloys; for coins; coins, metals, etc. In storage batteries; in spark plugs; and as a hydrogenation catalyst. Preparation Nickel is obtained by processing sulfide and laterite ore concentrates using pyrometallurgical and hydrometallurgical processes. The nickel matte powder obtained by roasting and smelting is further cleaned by electrometallurgical, steam and hydrometallurgical refining methods. A portion of the matte surface is baked to obtain commercially available nickel oxide agglomerates. 99.9% pure nickel can be obtained by electrolytic refining process. The purest nickel (99.97%) is obtained by vapor metallurgy. In this process, also known as the Mond Chemicalbook process, a mixture of nickel and copper sulfide is converted into oxides and then reduced by heating with water vapor at 350â??400 �° C. The resulting active form of nickel is treated with carbon monoxide to obtain volatile nickel carbonyl [Ni (CO) 4]. The reaction of the latter is reversible. Heating produces pure nickel and carbon monoxide. Overview Nickel is a slightly yellowish silvery-white metal, hard, easy to polish, magnetic (not as good as iron and cobalt) and good plasticity. Density 8.902g/cm3, melting point 1453 �° C, boiling point 2732 �° C. The chemical properties are relatively active. It has good corrosion resistance, is difficult to oxidize in air at room temperature, is not easy to react with concentrated nitric acid, and can resist alkali corrosion. Fine nickel wire is flammable, reacts with halogens when heated, and slowly dissolves in dilute acid. It can absorb a considerable amount of hydrogen. It is mainly used to make various alloys composed of iron, copper, zinc and other metals, and is widely used in cutting-edge technology, high-temperature ceramic products, corrosion-resistant alloys, chemical equipment, electronic and electrical equipment, special utensils, glass and other industries. Adding nickel to steel can improve the toughness and corrosion resistance of steel, such as nickel steel, chrome-nickel steel, etc.