Flat Sheet Membranes

APPLICATION OF SK-HB K-SILICATE MORTAR :

* K-SILICATE is used for jointing Acid Resisting brick in construction of vessels in suited for construction of fume chambers and stacks handling hot, dry Acid fumes and vapors.
It is also used for jointing chemical resisting stoneware pipes.
K-SILICATE cement is good bedding material for Acid â?? Resisting bricks and tiles.
The concrete surface needed protection should be dryed, clean and rough.
The bricks or tiles will be set with K-SILICATE cement over concrete surface applied with a suitable an impermeable interliner.

When Bedding and Jointing Materials are the same.
On the treated surface bricks or tiles are bedded to a thickness of about 6 mm and tamp gently with a wooden piece till the paste squeezes out of joints.
The paste that is squeezed out of the joint should be removed by trowel with good finishing. After the mortar of the joint is dryed treat the joints with 20% Hydrochloric Acid Solution by means of brush. A.R.lining should be always in contact with Acid and not with water.
Concrete subtract like Floor, Wall, tanks and similar surface should be protected with a membrane of Bitrok Mastic or compound steel tanks should be protected with rubber or PVC subjected to chemical conditions and temperature of chemical media. The Brick lining is recommended over the protective layer of Bitrok Mastic.
When Bedding and Jointing Materials are Different.
Spread the silicate type mortar about 6 to 8 mm thick on the back of the tile or brick. Press the tile on the bed leaving required space for joints between tiles for bricks. After the bedding mortar is set, fill Mp the joints with specified cement.PRODUCT DATA SHEET FOR SK-HB ( K-SILICATE) MORTAR
A general purpose cement for acid conditions Resistant to High & medium concentrations of most of the common organic and inorganic acids except Hydroflouric acid. Recommended where the concentration of the acid is high suitable for high temperature. Unsuited to aqueous solutions, alkaline conditions.

PREPARATIONS OF MORTAR :
* Measure 1 part by weight of K-SILICATE solution into a suitable mixing pan.

* Add slowly and gradually 3 parts by weight K-SILICATE mortar and mix thoroughly to form a smooth mortar.

* In hot season very large batches of mortar will become stiff quite rapidly therefore small batches, not exceeding 4 to 8 kgs. Will be prepared.

* The cement mortar will be used before it starts setting.

Item: Tarpaulin banner, PVC Flex banner, Hot/cold laminated.
Range: Frontlit banner, Backlit flex, Coated banner, Blockout, Banner greyback, Knife coated banner, Mesh banner.
Material: PVC + strong mesh
Surface: glossy, matt.
Weight: 230 gsm â?? 750 gsm
Yarn: 200X300D, 300X500D/18X12; 500X500D/9X9, 1000X1000D/18 X18, etc or customized.
Size: Width 1- 3.2 M, 5 M or customized. Length: 50 M or customized.
Character: Weather resistant(anti-UV, rain and frost), excellent applicability for different climate.
Anti flame.
Seamless and high strength.
High bonding strength.
Stable ink absorption, high color expressive force, self-cleaning, faster drying, perfect printing ability.

Metal Aids India a accredited with AN ISO 9001: 2015, 14001: 2015, OHSAS 18001 & PED Certified Company and was established in since 2010. We take the pleasure to introduce ourselves as a largest Manufacture & Exporter of all type of industries products like Seamless & Welded Elbow, Tee, Reducer, Clamp, Cap in different
shape & size (as per client drawing & specification) etc.
Product Specification: UNS 32750 Duplex Elbow
Specification: ASTM / ASME
Size: 1/2\" To 48\"NB & OD (Welded Thk: 1MM to 40MM)
Seamless Thk: Sch10, Sch 30, Sch 40, Sch 60, Sch 80, Sch 160
Type: Elbow (Short & Long Elbow),90 Deg Elbow, 45 Deg Elbow.
Form: Seamless & ERW (Welded)
Grade:
Duplex & Super Duplex: UNS 31803, UNS32205 (F51), UNS 32750
(F 53), UNS 32760 (F 55), UNS 31254 (SMO. 254)

Product Details:
Size 3 inch, 2 inch, 1/4 inch, 1 inch, 3/4 inch, >3inch
Connection Flange, Male, Female, Welded
Material TITANIUM
Application Hydraulic Pipe, Gas Pipe, Structure Pipe, Chemical Fertilizer Pipe
Elbow Bend Angle 90 Degree, 180 Degree, 45 Degree
I Deal In New Only
Metal Aids India, are one of the leading manufactures & suppliers of Titanium Forged Elbow.
Grade:-
Titanium Gr 1, Gr 2, Gr 3, Gr 4, Gr 5.
Dimensions
ANSI/ASME B16.11 & BS3799, etc.
Class:-
2000LBS, 3000LBS, 6000LBS, 9000LBS, etc.
Type:-
Socket Weld (S/W) & SCREWED (SCRD) â?? NPT, BSP, BSPT
Types of Titanium Forged Fittings : â?º Forged Threaded Elbow
â?º Forged Threaded Equal & Unequal Tee