Dh-Budenberg / Mensor Cpb3800-Dualst-10000Psi

High humidity environment is a big impact factor of power transmission and transformation equipment, it will bring discharge, flashover will eventually cause the switch to trip, even burning down equipment caused a large-scale blackout. Switchgear, electrical cabinet, exchange control cabinets, outdoor terminal boxes, Due to the compact internal equipment installation, wet and condensation will be more serious consequences.

At present, most user choose heating, ventilation and other method to prevent condensation. but in some well sealed cabinet and high temperature environment, traditional heating and exhaust air method is hard to work well.

Blue Jay company developed DH series using semiconductor technology, in a certain place to lead controlled condensation, make the cabinet interior humidity fall to safe value. It designed ultra-small install size, high efficiency energy-saving, do not need extra heater and fan wiring. And comes with the data acquisition module for remote monitoring, It's an efficient and reliable device to replace the old thermostat and heater / fan combination.

Screws

Electrical conveyor belt vulcanizer

Cglhj series of electrical conveyor belt vulcanizer are specialized equipments for curing joints of belts of conveyer machines. The machine is made of light aluminum alloy materials, and with small bulk, light weight , ordinary three-phase current power supply, temperature uniformity of heating plate, uniform pressure (1.0 ~ 2.0 mpa) of water supply system. It is equipped with light automatic electronic control box, which is connected with mainframe by integrative plug-in and multi-core cable .It»s reliable and convenient to operate. At the same time, it has the merit of fast warming, uniform temperature, high thermal efficiency, etc. It is a kind of ideal adhesive joint equipment mechanical rubber conveyor belt.
The quality of the belt connection will influence the working efficiency and service life of belts directly, especially for the long distance and high-strength conveyer belts. Therefore, cglhj vulcanizer is the necessary assistant equipment of belt conveyer.

Purposes
The device is widely used in vulcanizing and adhesive joint of canvas, nylon, steel cord, conveyer belt at spot in metallurgy, mining, power plants, ports, building materials, chemical industry around where are without sufficient explosive gases and the harmful gases which can corrupt metal. It can also be applied to the vulcanizing joints of belts of special features, such as anti-corrosion, thermal-protection, etc.
Technical parameters
1. Vulcanization pressure: 1.0-2.0mpa;
2. Vulcanization temperature: 145 ;
3. Difference in surface temperature of vulcanized plate: 5 ;
4. Calefactive time (at normal temperature to 145 ) :¿q30 min;
5. Power supply voltage: 380 v. 50hz;
6. Output power of electronic control box: 36 kw;
7. Temperature adjustment range: 0 to 200 ;
8. Timing adjustment range: 0 to 99 min;
9. After the pressurization of 0.8 mpa, the gap between upper and lower heating plate is not more than 0.4 mm


Wooden case or steel case

These are medium-weight suspended sediment samplers for hand line or sounding reel suspension. The DH 59 sampler comprises a streamlined bronze casting, 15 inches (38 cm) long, which partially encloses a pint-size (0.47-liter) sample container (sold separately). This sampler weighs approximately 22 pounds (10 kg), and is equipped with a tail vane assembly to orient the intake nozzle of the sampler into the approaching flow as the sampler enters the water.

Introduction
DHS-16A halogen moisture meter adopts HBM weighing system to ensure accurate weighing. Ring quartz tungsten halogen infrared heating source, quick drying of samples; in the drying process, the moisture content lost by the sample is continuously measured and displayed immediately. After the drying procedure is completed, the final moisture content value is locked.
It can fully meet the requirements of moisture testing in areas like food, medicine, tobacco, paper making, chemical and mineral industry and so on.

Material: steel, alloy steel, stainless steel
Standard: DIN934, DIN555, DIN439, UNI5587, DIN985, DIN982, DIN6915, DIN1587, DIN439, A194, A563, DIN6923, DIN557, DIN580, DIN928, DIN929, ANSI B18.2.2
Grade: 2, 5, 6, 8, A194 2H, A194 4, A563 DH
Surface: plain, black, phosphate, zinc, hot dip galvanizing, dacromet, teflon
Package: standard export package.