Beryllium Copper Master Alloy Cube4 Cube10

We are manufacturer of beryllium metal, beryllium oxide, beryllium fluoride, aluminum beryllium master alloy, beryllium copper master alloy, beryllium copper alloy(C17000, 17200, 17300, 17410, C17500, C17510, JK520, JK38, etc).

Raw melting material - aluminum scraps, cans, engine waste etc.
Output capacity - 5-30 tons/h, customized
Automation - Full automatic/ half automatic (based on output requirement and investment budget
Ingot type - ADC12 (7.5kg/ 10kg / customized)

1. After cleaning the oil and grease of waste aluminum, manually put it into the furnace with a forklift;


2. Ignition for melting furnace .Heat up to 680C, and input appropriate proportion of alloy elements. Heat up to 800C, melt and stir evenly, then fetch samples to the spectrometer for testing.

Every lot of production need to do testing .


3. Put A tool that attracts iron into the furnace by forklift, to suck away the iron in the aluminum water.


4. Put the slag agent into Alu liquid to remove the slag. After slag removed , put the slags into Aluminum ash separation machine , and let the aluminum water and ash separate. The proportion of slag agent and aluminum liquid is 1:500


5.Open the drain valve and the aluminum water flows automatically to the ingot production line After the ingot casting is completed, the ingot stacking robot will stack the ingots, which means the production is completed.

Cube2--c17200 (cda 172) beryllium copper is the most commonly utilized copper beryllium alloy and is notable for its highest strength and hardness compared to commercial copper alloys. C17200 alloy contains appr. 2% of beryllium and achieves its ultimate tensile strength can exceed 200 ksi, while the hardness approaches rockwell c45. Meanwhile, the electrical conductivity is a minimum of 22% iacs in the fully aged condition.C17200 also exhibits exceptional resistance to stress relaxation at elevated temperatures.
Available sizes:
Custom diameter & sizes, random mill lengths
International specification: ú¿¦·+O¦µ+¦ú¬
Rods/bars/tubes: astm b196, 251, 463; sae j461, 463; ams 4533, 4534, 4535; ams4650, 4651;
Rwma class 4
Strips:astm b194, ams4530, 4532; sae j461, 463
Sheets: astm b194
Wires:astm b197, ams4725, sae j461, 463
Plates:astm b194, sae j461, 463; ams4530, 4533, 4534, ams4650, 4651; rwma class 4.
European standards: cube2, din 2.1247, cw101c to en
Note:
Astm: american society for testing and materials
Sae: society of automotive engineers
Ams: aerospace materials specification (published by sae)
Rwma: resistance welder manufacturers' association
Note: unless otherwise specified, material will be produced to astm.


Plywood cases/plastic pipes/wooden cases

Key Properties of Copper Alloys
Excellent heat conductivity.
Excellent electrical conductivity.
Good corrosion resistance.
Good biofouling resistance.
Good machinability.
Retention of mechanical and electrical properties at cryogenic temperatures.
Non-magnetic.

We also have interest in selling Bulk Ferro Alloys and especially Low/Medium Carbon Silico Manganese and we are already exporting these product/s. We have tied up with a manufacturer bin , Bhutan to sell their products.

Products are:-

Low Carbon Silico Manganese. Typical Specifications are:

Mn: 55 % Minimum
Si: 25-28%
C: 0.2% Maximum
P: 0.15% Maximum
Size: 10-150 MM (90%)

Medium Carbon Silico Manganese. Typical Specifications are: -

Mn: 55%-60%
Si: 22%-25% Max
C: 0.5% Max
Si: 0.05% Max
P: 0.2%-0.40%
Size: 10-150 MM (90%)

For sure, we will be able to meet the requirements, once we get your reply

The third-generation Hastelloy alloy alloy20 is one of the more commonly used components in the C series. Due to its low nickel content, low cost, excellent mechanical and corrosion resistance, it is widely used in pump flow components where corrosion and wear coexist. The solubility of hardness in the ferrite phase reaches its maximum at 850, and as the temperature increases, the solubility increases rapidly and is much smaller than that of the austenite phase. The Cu content in c-276 has exceeded the high solubility in the ferrite phase.
The Hastelloy alloy alloy20, formed by a large amount of Ni element composition, is used in industries such as chemical engineering, pharmaceuticals, seawater, fertilizers, and other industries for projects with high corrosion resistance requirements due to its unique characteristics that lie between ferrite and austenite structures, and its resistance to intergranular corrosion. In recent years, the nuclear power industry has developed a corrosion-resistant ability in the operation of power station equipment, which cannot be replaced by other materials. Containing a large amount of Cr component, with high oxidation resistance.
The molybdenum element in stainless steel materials is only about 2%, which is far less than the molybdenum content of Hastelloy alloy alloy20. Therefore, high concentration acidity requires the use of materials well. Mainly used, it has the following corrosion resistance properties in oxidation and reduction, and excellent corrosion resistance to most corrosive media. In this oxidizing environment, such as in sulfuric acid manufacturing and solutions containing a large amount of oxidizing ions, it has excellent resistance to pitting corrosion, crevice corrosion, and stress corrosion.



Product name

ALLOY 20 STAINLESS STEEL
Thickness range

0.3mm-3.0mm,

Width range

600mm-1500mm

Length

2000mm, 2438mm, 3048mm

Size

1000mm*2000mm, 1219mm*2438mm, 1219mm*3048mm, or as required

Finish

No. 1 , No. 4, hairline , 2b, BA, 8K, embossed, PVD color coated, sand blasted, anti-fingerprint

Lead time

7 to 15 working days after the receipt

Packing

Wooden pallet or according to customer's request

Application

Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet, kitchen sink, advertising nameplate



Warehouse Storage

Shandong Jintuo Metal Materials Co., Ltd is located in Liaocheng City, the capital of steel tubes. It is a large enterprise specializing in the sales of carbon steel, stainless steel, galvanized color coated products, and copper and aluminum.Our company adopts a flexible business approach and management mechanism to provide good services to customers, while also considering the interests of the owner and the project, in order to ensure the quality of the project.