Analyzing software features
1. Multi-windows operation
2. 46 different types arrhythmia analysis
3. Demix morphologies
4. Check sinus node recovery time
5. Check parasystole
6. Check accelerate escape rhythm
7. Check reciprocal beat
8. T wave alterans
9. Heart rate variability
10. Hrt (heart rate turbulence)
11. Sleep apnea analysis
12. Intellectual analysis of various tachycardia
13. Display start and end point of arrhythmia on same screen
14. Beat to beat analysis, no missing beats
15. 26 types histogram analysis
16. Pacemaker analysis can label 7 types shapes
17. St-t analysis
Recorder features
*1.77 inch color lcd, displays three leads ecg for each screen
*high resolution make it is convenient to observe p or q wave and other micro-signal. Lcd screen display ecg grid to facilitate physician to watch ecg waves, count hr and other parameter
*skin resistance measurement can evaluate the connection between electrode and patient skin
*can freeze the ecg strip in the screen to observe it in detail
*battery estimate in case of non-record by low power
*holter information browser to display the start time and duration of current recording
*speed: 25mm/s, gain: 5mm/mv for lcd screen display
*no operation within two minutes, the screen will be auto-off to save power. And button can be locked automatically in case of misoperation
*event button can make mark for symptom
*the cable socket is mis-plug and break-off proof design.
Recorder specification
A) holter recorder power: dc 3.0v;
B) recording time: 24 hours;
C) recording mode: continuous;
D) sample rate: 4000hz;
E) standard sensitivity: 10mm/mv (-5%, +5%);
F) input circuit current: ín0.1ª8a;
G) input impedance: >=2.5 m? ;
H) noise electric level: <=15ª8vp-p;
I) frequency response: 0.05 -150 hz;
J) cmrr: í60 db;
K) lower frequency feature: time constant is not
Less than 3.2s;
L) equipment safety type: the holter recorder is type-bf with internal power;
In-circuit Test Probe Pogo Pin P156 Series for PCB Assembly Inspection
In-circuit test probes are mainly used for testing electrical performance of in-circuit components on PCB and the connection between circuit networks. It could quantitatively measure components such as resistors, capacitors, inductors, crystal oscillators, and perform functional tests of diodes, triodes, optocouplers, transformers, relays, operational amplifiers, power supply modules and integrated circuits.
We will introduce in-circuit test probe PQ156 series here. Its test center is 156 mil. The diameter is 2.36 mm and the total length is 33.79 mm. Various tip styles, for example, B, C, G, J, K, L, T, etc., are available for test probes. There are roughly four types of receptacles, namely CR, SC, WW and WW-L, to fit each test probe
For details, please check below parameters.
Technical Specifications
Recommended
Minimum Center: 3.96 mm (156 mil)
Current Rating: 5 Amps, continuous
Contact Resistance: 50 milliohms
Mounting Hole Size: 2.75 mm
Full Stroke: 6.35 mm
Rated Stroke: 4.32 mm
Spring Force: 113/198/255/285 gf (4/7/9/10 oz)
Company Information
Centalic Technology Development Ltd was founded in 1980. Specializing in R&D, manufacture, sales and technical service, Centalic is one of the earliest high-tech enterprises which concentrates on large-scale production of various test probes and precision metal parts, and has a professional manufacturing base owning complete production lines and test equipment.
Our products include semiconductor test probes, in-circuit test probes, radio frequency probes, harness probes, battery contact probes, switching probes, big-current probes, spring probes, universal complex test probes, wafer probes, and so on. They are widely applied to the tests of various electronic products, such as in-circuit tests of semiconductor components, chips, PCB and other electronic peripherals.
