Inner ring is processed through heat treatment and precision machining, tolerance of dimension and geometric accuracy accords to the national standard. There is guiding chamfering at the two ends of the bearing race of the inner ring, which is convenient for installation. They are used for situation when the axis can not be processed with heat treatment and can not be treated as bearing race. When the needle rollers with inner ring and without ring are used together, normal working windage can be reached.
Inner ring tolerance of lr is more than ir, terminal facet is not grinded, the price is low and they are usually used together with needle roller bearing with pressed outer ring.
Got-400r metal flat gasket can also be processed into the inner and outer ring of the spiral wound gasket. We will punch the gasket that with the size smaller than 8fª by punching machine, and for the one that with large size by lathe. If for the expensive material as ss304, ss316, etc. As long as the sealing plane is not over wide, we will basically use the special ring rolling machine, process by the wire rod, to largely cut cost. The carbon steel outer ring can be coated with zn, white zn, or paint-drying, and the typing will be according to the standards or the demands.
Product structure:
The metal interface flat gasket, choose kinds of solid metal, mechanically cut and processed into kinds of metal sealing gaskets by high precision nc lathe, suitable for the sealing parts of pressure container, valve, cylinder head with high temperature, high pressure, and strong corrosion. General characteristic is installation area small and preload pressure high.
Got-400r metal flat gasket can also be processed into the inner and outer ring of the spiral wound gasket. Got self design and manufacture the ring processing special equipment, outer ring trench cutter, and inner ring chamfering machine. Comparing with the traditional lathe, it is high efficient, low cost, and need no special fixture.
Inventory product:
Size:
Asme b 16.20
1/2fª ~ 24fª
150lb, 300lb, 600lb, 900lb
Other sizes or standards on require.
Material:
Carbon steel, zinc plating, or without zinc plating
Ss304, ss304l, ss316, ss316l
The following special material on require:
Ss321, ss317l, duplex 31803,
Ti, ni, inconel, monel, hastelloy, and zr, etc
Supplier: Precision machined parts: cnc machined parts, vmc machined parts, forged and casting parts machined to drawing, carbon steel, stainless steel, aluminium and engineered plastic machined parts precision cnc/vmc machined parts like shaft, shaft sleeve, shaft spacer, pin, dowel pin, plug, end cap, ring, rotor, forged fitting, flange, bush, coupling, pulley, piston, cylinder, nozzle, back plate, cover plate, valve parts (stem, trunnion, seat, gland, lantern ring) as per customer requirements and specification. Buyer: Carbon steel, stainless steel, duplex, aluminium, and titanium stocked round bar, hollow bar and hex bar
Material : Steel
Contact Angle : 0
Lube Hole Center : 0.179 in
Eccentric Collar Offset : 0.188 in
Rows of Balls : Single
Preload Level : None
Static Load Rating [Max] : 4,600.0 lbf
Bearing Type : Radial
Width [Nom] : 2.219 in
Precision : Standard
Radial Internal Clearance : C3
Cage Type : Metal
Origin : Wide Inner Ring
Seal Protection Width : 1.070 in
Collar No. : S1112K
Locking Device : Eccentric Locking Collar
Snap Ring : No Snap Ring
Precision Level : Standard (ABEC 1)
No. in Set : Single Bearing
O.D. [Nom] : 3.3465 in
.D. Type : Straight
Cage Material : Steel
Inner Ring Width : 1 11/16 in
Inch/Metric : Inch Bore
Outer Ring Width : 22.000 mm
Collar O.D. : 2 1/2 in
Capacity : Standard Capacity
Bore Type : Round Bore
Seal O.D. : 2.908 mm
Enclosure : Double Sealed
Ball Material : Steel
Temperature Range [Max] : 275 F
Seal Material : Rubber
Seal Type : Contact Seals
Temperature Range [Min] : -30 F
Dynamic Load Rating [Nom] : 8,160.00 lbf
I.D. : 1 3/4 in
Radial Internal Clearance Specification: Greater Than Normal Clearance
Collar Width : 0.719 in
Lubricant : Polyurea Base
Metal Aids India a accredited with AN ISO 9001: 2015, 14001: 2015, OHSAS 18001 & PED Certified Company and was established in since 2010. We take the pleasure to introduce ourselves as a largest Manufacture & Exporter of all type of industries products like Flange, Forging Flange, Component Flanges, Precision Different Component Flanges in different shape & size (as per client drawing & specification) etc in CNC Lathe & Milling Machine (VMC)
Description: Stainless Steel Flange
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Size: 1/2" To 48" (15 NB To 1500 NB)
Type : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectable, Ring Joint Flanges
Class : 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
Form : Circle, Square, Plate, Ring, Flat
Grade :
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Metal Aids India a accredited with AN ISO 9001: 2015, 14001: 2015, OHSAS 18001 & PED Certified Company and was established in since 2010. We take the pleasure to introduce ourselves as a largest Manufacture & Exporter of all type of industries products like Flange, Forging Flange, Component Flanges, Precision Different Component Flanges in different shape & size (as per client drawing & specification) etc in CNC Lathe & Milling Machine (VMC)
Description: Stainless Steel Flange
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES
Size: 1/2\" To 48\" (15 NB To 1500 NB)
Type : Socket Weld, Slip On, Blind, Lapped, Screwed, Weld Neck, Long Weld Neck, Reducing, Spectable, Ring Joint Flanges
Class : 150#, 300#, 400#, 600#, 900#, 1500#, 2500#
Form : Circle, Square, Plate, Ring, Flat
Grade :
Specification: ASTM / ASME B16.5, ASME N 16.47 SERIES