Light Cycle Oil Lco

Specification: Refinery product

MOQ: 50,000 - 1,000,000 MT/Month

Technical Details:
Density at 15 C: 920-980 kg/m³
Sulfur Content: 0.5-1.5%
Flash Point: 65°C min
Cetane Index: 25-35
Trading Details
Origin: Republic of Kazakhstan
Incoterms: CIF/FOB
Loading Ports: Port of Aktau, Rotterdam, Houston, etc.
Payment Guarantee: SBLC, DLC
Payment Terms: MT103 or TT
Performance Bond: 2% PB
Contract Term: 12 months minimum (with rolls and extensions)
Inspection: SGS, CIQ or similar

Light Cycle Oil LCO is a diesel boiling range product from fluid catalytic cracking units flexible process to process LCO into desired products such as verylow sulphur diesel and high octane higharomatics naphtha It is a light lubricating oil that is suitable for use on bicycles and similar equipment

It is a diesel boiling range product from fluid catalytic cracking units Light cycle oil is a poor diesel fuel blending component LCO are produced at the bottom of the fluidized catalytic cracking FCC process in a refinery and are enriched with 5080 wt heterocyclic aromatic compounds 3 wt S and 600 ppm N

Light Cycle Oil, also known as LCO, is a refined product derived from the processing of crude oil. It has a higher density and boiling point range compared to diesel fuel but lower than heavy fuel oil. LCO is commonly used as a feedstock for fluid catalytic cracking units (FCCU) and is also used as a blend component for marine fuels.

Minimum Quantity : 10,000 Metric Tons per Month
Maximum Quantity : 150,000 Metric Tons per Month

Light Cycle Oil (LCO)

Light Cycle Oil (LCO)

We are trading in - Light Cycle Oil

Light Cycle Oil (LCO) is a diesel boiling range product from Fluid Catalytic Cracking Units (FCCUs). However, LCO is a poor diesel fuel blending component without further processing. Oil refining is an industrial process which involves separation, conversion and finishing. FCC centered refinery uses Fluid Catalytic Cracking Unit (FCCU) has the major conversion unit. FCCU is responsible for the production of petrol, LPG and Light Cycle Oil (LCO).

Diesel is the most important fuel used in automobiles because of its high efficiency. The global demand for diesel is increasing than petrol but many older refineries have optimized their plant for producing more petrol than diesel. Light Cycle Oil is the diesel boiling range material, which is produced in addition to gas and petrol in the FCCU. LCO is treated in the diesel hydrotreater (DHT) unit to produce low sulphur environment friendly diesel.

Production of LCO is increased in the FCCU by employing medium conversion mode rather than using traditional low conversion mode. Low conversion mode will cause a loss of gas production, deteriorate petrol octane rating and also increase the production of low valued slurry oil. With medium conversion technique both gas quality and quantity is maintained and improves the petrol octane rating. Medium conversion mode also reduces the amount of low valued slurry oil. Slurry oil contains LCO boiling range material in it; hence a separate slurry oil stripping tower is employed to recover the LCO from slurry oil.

LIGHT CYCLE OIL (LCO)
Minimum Quantity: 5000 MT per Month
CIF Price: USD $400.00MT/USD $390.00 NET on CIF

TERMS OF NEGOTIATION
ORIGIN: FEDERAL REPUBLIC OF NIGERIA
INCOTERMS: CIF/FOB/TTO
LOADING TERMINAL: GULF OF GUINEA / FORCADOS PAYMENT
TERMS: SBLC-MT760, MT103
PERFORMANCE BOND: 2% PB
CONTRACT TERM: 12 MONTHS MINIMUM (WITH ROLLS AND EXTENSIONS)
INSPECTION: SGS, CIQ OR SIMILAR
COMMISSION: STRUCTURED NCNDA/IMFPA

FOB ROTTERDAM TANK TAKEOVER (SELLER TANK EXTENSION)
1. Buyer sends ICPO in line with seller working procedures
2. Seller issues Commercial Invoice (C.I.), Buyer Signs within 24 hours and returns to Seller Within its validity.
3. Upon receipt and review of the signed C.I., Seller sends to the buyer detailed information of Tank
Storage facility where the product is stored for buyer to contact and extend the tank for at least a minimum of three (3) days.
4. Upon confirmation of Buyer's tank tension from seller's tank farm, Seller submits to by an
Unconditional Dip Test Authorization (UDTA) along with the below full POP documents: -
SGS report,
Pre- Injection Report,
Commitment Letter to Supply
Authorization to sell & collect.
5. Buyer appoints their testing teams SGS or Equivalent to vessel. dip test in seller tank before injection to the buyer's vessel or conduct test upon injection completion into the buyer's vessel to ascertain the Quality and Quantity injected to the vessel.
6. Upon successful completion into buyers tanker, Seller issues payment invoice for Buyer to pay for the product value
7. Seller issues Tittle ownership documents to buyer upon confirmation of buyer payment. NCNDA/IMFPA sign and seal by all intermediaries connected in the transaction.
8. Seller within 24 hours upon receipt of the buyer's payment pays commission to all intermediaries involved in the transaction.

LIGHT CYCLE OIL ( LCO )
"***Special offer***
Russian origin-----
DELIVERY TERM: FOB & CIF
" MOQ: 40,000 MT/Month ( 1-year Contract )----- PACKING: Bulk, etc----- "Payment Term: DLC/MT700 --- SBLC/MT760 --- 5% Guarantee WORKING PROCEDURE CIF/TTO --- 10% Deposit in Escrow Agent WORKING PROCEDURE CIF--- Any World Safe-----
Without any payment in advance"

Origin: Russia
Quantity: 100.000 Barrel / 1,000,000 Barrels/ per month
Delivery: CIF