To match up the growing and varying needs of customers, we are providing a large range of Two-Bed Demineralizer. The product we provide is used to remove ionized impurities from water. This Two-Bed Demineralizer is quality tested and known for their effectiveness.
The demineralizer is a modern technology, which is used to purify water by means of ion exchange. These units have a very simple construction: the tank for water and resin beads, which are needed for the ion exchange process.
Traveling Microscope With horizontal and vertical scales. The bed is of cast iron and accurately machined. The horizontal carriage is machined and inters ground on the guide ways of the horizontal bed. The carriage is fitted with vertical brass pillar carrying a microscope tube on a ground fitted vertical carriage. The base is fitting with two leveling screws Horizontal scale is 20cms and vertical 15cms. Long. Both the horizontal scale and vertical carriages are provided with slow motions, which travels app. 3cms in one traverse. Microscope tube is provided with rack & pinion. A milk white Perspex platform is provided on the horizontal bed. Vernier constant 0.001cms. Complete in well-polished wooden case. Having stainless steel scale.
The Cornell Type Tester test the long-term capacity of bedding to resist cyclic loading. In detail, it is created to measure two critical elements of a mattress, firmness retention and surface deformation, at various cycle points from 0 to 100,000 cycles in efforts to simulate mattress performance after approximately 10 years of use.
After the upgrade, the full automatic pin system vacuum membrane press machine does not require manual placing of the backing plate.
The press cycle is as follows:
1) Layup of parts onto tray with pins in upright position
2)Press the button to drop the parts that does not touch the pins
3) Pulling of vinyl over finished bed
4) Loading of press
5) Processing parts through the press cycle
6) Unloading of press
7) Turn over device removes parts from tray
8) Tray returns for new cycle
All of this is done with two rotating trays,the working period of ordinary workpiece is less than 2 minutes (results vary based on part configurations, and ambient conditions).
Introduction
The features of the equipment are advanced technology, reliable performance, rational structure, flexible layout, simple application and maintenance. The PLC control system is applied to realize mechatronics integration system. At present, there are 16 series, more than 80 kinds of production for the regeneration production line.
Clay sand processing production line
Vibration conveyor, cast hanging conveyor, belt conveyor, magnetic separation machine, winding machine, hexagonal mesh, sand library, two-way cooling bed, hoisting machine, belt machine, boiling reclaimer, belt conveyor, hoist, discharger, belt machine, sand library, the disc feeder, belt conveyor, hoist, belt conveyor, exhaust ventilator, accessories, two-way feeder, screw feeder, accessories electronic scale sand mixing machine, belt machine, the disc feeder.
1. Flask shaker
Exciting fore of vibration motor make the falling sand along the chute to the bucket machine, with advanced and reasonable structure, shakeout of high efficiency, smooth and steady, low noise.
2. Belt conveyor
This conveyor is a new type designed according to the special application of casting plant. It is mainly used for conveying the new sand, used sand, molding sand, coat and lime stone as well as the construction material, chemical industry and food processing for all granular or block shape material.
If any new inquiry of Filtration Equipment ,Mineral Processing EPC, Mining Machine, Hydrocyclone, Heavy Medium Cyclone, High Frequency Linear vibrating Screen , We have been a professional mineral processing equipment manufacturer in China for almost 30 years. We are very glad to help you.
1.what the material that you deal with?(iron,copper,chorm ore,or other)
2.what the overflow and underflow do you want? and what the machine use which process or stage?
3.and whats your capacity required and your
If any new inquiry of Filtration Equipment ,Mineral Processing EPC, Mining Machine, Hydrocyclone, Heavy Medium Cyclone, High Frequency Linear vibrating Screen , We have been a professional mineral processing equipment manufacturer in China for almost 30 years. We are very glad to help you.
1.what the material that you deal with?(iron,copper,chorm ore,or other)
2.what the overflow and underflow do you want? and what the machine use which process or stage?
3.and whats your capacity required and your
Thickener equipment is mainly used for concentrating of fine and tailings pulp. its structure is simple ,torsion is large, standardization level is high. Adopting intelligent control, can test the running resistance random , adjust the running state. It can realize stepless speed control (hydraulic or inverter), in order to adapt to ore pulp works are of different concentration and proportion .Kefan Heavy Industry developed efficient thickener ,sludge thickener, drum thickener, multi-function extraction thickener ,are widely used in metallurgy, mining, chemical, ceramics, coal and other industries.
1.Deaeration cell is provided to prevent solid particles from attaching to bubbles so that solid particles can fall like a parachute.
2.The mineral-feeding pipe is lower than the pulp surface; it prevents the air to be brought in while feeding
3.The feeding sleeve is moved to a lower position and receiving plate is equipped. Therefore, the fed slurry fall evenly and steadily, preventing rolling phenomena because of the residual pressure from feeding
Hydrocyclones is also called cyclone separator.Hydrocyclones include hydrocyclone desander(10 in. cone) and hydrocyclone desilter(4 in. cone),which used to separate sand and silt from the drilling fluid.
A hydrocyclone has two exits on the axis: the smaller on the bottom (underflow or reject) and larger at the top (overflow or accept). The underflow is generally the denser or thicker fraction, while the overflow is the lighter or more fluid fraction. Centrifugal pump is used to pump the drilling fluids from mud tank into the set of hydrocyclones.
cyclone unit can be equipped with automatic control system to set parameters for black metal, non-ferrous metals, coal, industrial minerals, non-metallic minerals and building materials. It also checks and adjusts the liquid level of pump tank, slurry flow, outlet pressure, slurry concentration, and motor rotation speed to ensure the indexes are within optimal range.
Hydrocyclones is also called cyclone separator.Hydrocyclones include hydrocyclone desander(10 in. cone) and hydrocyclone desilter(4 in. cone),which used to separate sand and silt from the drilling fluid.
A hydrocyclone has two exits on the axis: the smaller on the bottom (underflow or reject) and larger at the top (overflow or accept). The underflow is generally the denser or thicker fraction, while the overflow is the lighter or more fluid fraction. Centrifugal pump is used to pump the drilling fluids from mud tank into the set of hydrocyclones.
cyclone unit can be equipped with automatic control system to set parameters for black metal, non-ferrous metals, coal, industrial minerals, non-metallic minerals and building materials. It also checks and adjusts the liquid level of pump tank, slurry flow, outlet pressure, slurry concentration, and motor rotation speed to ensure the indexes are within optimal range.
