Ptfe Rod

Rod from 6mm to 100mm

1. Description:
Recognized as the first fluorocarbon material in the world and referred to as PTFE or tfe, it is the most chemically resistant plastic known. It has a working temperature range of minus excellent thermal and electrical insulation properties and a low coefficient of friction.
With a non-stick surface, very few materials will adhere to it and those that stick can easily be peeled or rubbed off. Ptfe's mechanical properties are lower than other engineering plastics, but that can be improved by adding fillers such as glass fiber, carbon, graphite, molybdenum disulfide and bronze.
2. Features:
High chemical resistance
High temperature resistance
Non-contaminating
Maintenance free
Long durability
Self lubricating
3. Specifications:

Types Diameter(mm163,169, Length(mm163,169
Pressed rod 2~4Produced under requirements
Extruded rod 5~120500~3000
Die pressed rod 25~300100~300

Main technical data:
Properties Unit Result
Apparent density G163,175,cm 32.10~2.30
Tensile strength(min) Mpa4.0
Crack elongation(min) 163,165,140
Remarks:
We can also produce extruded teflon ptfe rod in other diameter and length according to customer's requirements.
4. Applications:
Common applications include food processing, electrical parts, insulators, medical components, seals, bearings and high heat situations.
Note: virgin grade rod is made from unreprocessed ptfe resin and costs more then the less expensive "mechanical grade" PTFE rod, which is made from reprocessed ptfe resin. Our factory offers both grades.



Plywood case for easy shipping

PTFE rod has two types, PTFE molded rod and extrude rod.
Molded rod size:dia6mm~300mm
Length:300mm
Extrude rod size:dia4mm~200mm
Length:1Meter.


Molded rod size:dia6mm~300mm
Length:300mm
Extrude rod size:dia4mm~200mm
Length:1meter.

Specifications:

1) Does not age

2) Has a wide range of practical temperature from -180oC ~

+260oC

3) Wax-like surface, to which anything hardly sticks

4) 2 kinds of PTFE rods available:

a) Extrusion rod:

i) Size: diameter 4 - 100mm

ii) Length: 1m, 2m, or cut according to customer's demand

b) Molding rod:

i) Size: diameter 20mm (min.) - 600mm (max.)

ii) Length: 300mm (max.)

5) Processing capacity: 8MT/month

6) Applications: electrical insulation, seal, anti-sticking materials



Main properties:

1) Apparent density: 2.10 ~ 2.30g/cm3

2) Tensile strength (min.): 14.0MPa

3) Ultimate elongation (min.): 140%

Ptfe rods

Product range of ptfe rods, sheets and hollows:
Rods : extruded - diameter 3 to 200, length 1000 / 2000
Molded - diameter 20 to 775, length 300
Psheets : skived - thick 0.05 to 5, width 300 to 1800
Molded - thick 1 to 150, area 300 x 300 to 1500 x 1500
Hollows : skived - od 10 to 150, id 4 to 100, length 1000
Molded - od 25 to 1440, id 10 to 1420, length 300
Other made-to order sizes on request


As per as product

Hiwell offers a wide range of sizes of high quality extruded and molded PTFE rods. Our molded rods are available in virgin PTFE, modified PTFE and PTFE compound materials. The high quality PTFE rods are commonly used in machined components.

Virgin PTFE 100% vingin PTFE material,excellent thermal, chemical, and electrical resistant properties.
Modified PTFE PTFE modified to exhibit superior physical properties.
PTFE Compounds PTFE blended with specific additives to suit specific applications.

It is moulded with PTFE and has good chemical resistance and high electrical property. Widely used as insulating parts and sealing in chemical, electrical, etc.
Diameter: 4mm~200mm
Density: 2.1 2.3g/cm3
Tensile strength: 15Mpa
Ultimate elongation: 150%
Dielectric strength 10KV/MM

PTFE rod is made of 100% of PTFE extrusion,It has the best chemical resistance and dielectric properties,no aging,non-stick, when no load ,it can be used in the temperature of -180 +260

Specifications of single screw plastic ptfe teflon extruded rod

1. Use virgin ptfe resin to make
2. The size is:
A)od: 3mm~25mm, max length 4200mm.
B)od: 25mm~150mm, max length 4200.

C)od 150~500mm, 1000mm.
3. Tolerance: -0.1~+0.1mm
4. Color: natural white, red, yellow, black.
5. Surfact: smooth, no impurities, no black spot.
6. Perfect package: inside is plastic paper, outside is fumigation wooden box.
7. Delivery time is usually 10days, as can according to the fact quantity to deliver.

Characteristics of single screw plastic ptfe teflon extruded rod



One key important advantage of ptfe rod is its operating temperature range, it can
Easily out perform other engineering plastics by being able to perform continuously
At -250°c, right up to an amazing 250°c. Another important advantage of ptfe rod
Is its outstanding co-efficient of friction, ptfe is in the record books as having one of
The lowest friction values known to man. Ptfe also has excellent acid and chemical
Resistance. Another feature of ptfe is its ability to set by or due to compression.
Ptfe has excellent electrical resistance. Ptfe is also water repellent and is often used
In the manufacture of modern high performing, water repellent and breathable clothing.