150Kva Three Phase Servo Voltage Stabilizer

Three Phase input and Three Phase output Servo Voltage Stabilizer

GALATA SERIE DVR-M3H
Full Automatic Servo Dynamic Voltage Regulator
DVR-M3 150KVA THREE PHASE

The DVR-M3H Regulator provides the following:
-Protection of the user from negative voltages.
-Protection of the user and the device from excessive current.
-Undisturbed pure sinus voltage regulation.
-Long-term overload protection and short-term protection.
-AC voltage balancing with extremely high accuracy.
-Run smoothly on all loads from 0% to 100%.
-Manual transfer to bypass regime without regulating.
-Display all values against the probabilities in the bypass regime.
-Record mains input voltage limits and load current values.
-Static, not gradual, dynamically correct output voltage too quickly without user notice.
-When protections are activated, record the number of protection trips and the reason for each parameter separately.
-Generation as standard is 0.4% (379.87V - 382.6V) stable when the input voltage is within the range of 112.6V ..... 537V.

TECHNICAL SPECIFICATIONS
INPUT
Input Voltage Correction Range :190-415 / 275-450 / 310/485 VAC
Input Voltage Operating Range : >155v...490v<
Operating Frequency : >47.....64 <
Input Protection : Overcurrent. Low and High Voltage Protection (Optional)
OUTPUT
Output Voltage : >380v...415v< +/- %0,4
Overload :10 SECOND % 200 load
Correction Speed / Recovery Speed : - 90 Volt / S (150-250VAC the range)
Output waveform : Pure Sine
Output protection : Overcurrent. Low and High Voltage Protection (Optional)
Output protection at low voltage : 337V on - 303V off
Output protection at high voltage : 424v on ... 433 off
OPERATING PRINCIPLES : Servo Motor - Microprocessor - Dynamic Servo
GENERAL
Cooling : Smart fan system (Thermostat)
Measurement and imaging : Input and Output Voltage Led Display / Input, Output Voltage and Ampere Led Display MULTIMETER
Continuous operating time at full load : 0..105%.
Continuous load 96%
Mechanical By-pass : Manual control network / 1-0-2 Pako Switch / Remote Switch / Lock key On / Off
Protection Class : IP20 and Other Options

TECHNICAL SPECIFICATION OF 100KVA THREE PHASE OIL COOLED SERVO VOLTAGE STABILIZER

1. Capacity : 100KVA Three Phase
2. Model : Make SERVOSINE
3. Input Voltage Range : 190V-270V 1Phase / 340V-470V 3 Phase
4. Output Voltage : 230V +/-1% 1 PH / 400V +/-1% 3 PH
5. No. of phases : Three, 4 Wire
6. Line Frequency : 47-53Hz.
7. Output Voltage Regulation : +1%
8. Type of Cooling : Oil Cooled
9. Type : Unbalanced supply and Load conditions
10. Efficiency :> 98%
11. Speed of Correction : 30V per sec (For 3 Phase)
12. Wave form distortion : Nil
13. Effect of Load power factor : Nil, Suitable for all power factors
14. Ambient Temperature : 0-65C with RH 90%
15. Duty Cycle : Continuous
16. Indications on each phase : Input Mains, Input Low, Input Voltage, Input High, Out
Voltage.
17. Controls on each Phase : Auto/Manual Push Button, Increase/Decrease Push
Button Volt adjuster Set Button
18. Metering : Digital
19. Mounting : On Wheel
20. Construction : MS Sheet Body, Prime Grade Powder Coating
21. Spares Availability : Available with Company
22. Transformer Winding : Prime Grade Copper Wire on CRGO Core
23. Servicing & Maintenance : Easley can be do by any technical known Person
And from company side on call log.

Technical Specification Of 75kva Three Phase Oil Cooled Servo Voltage Stabilizer

1. Capacity : 75KVA Three Phase
2. Model : Make SERVOSINE
3. Input Voltage Range : 190V-270V 1Phase / 340V-470V 3 Phase
4. Output Voltage : 230V +/-1% 1 PH / 400V +/-1% 3 PH
5. No. of phases : Three, 4 Wire
6. Line Frequency : 47-53Hz.
7. Output Voltage Regulation : +1%
8. Type of Cooling : Oil Cooled
9. Type : Unbalanced supply and Load conditions
10. Efficiency :> 98%
11. Speed of Correction : 30V per sec (For 3 Phase)
12. Wave form distortion : Nil
13. Effect of Load power factor : Nil, Suitable for all power factors
14. Ambient Temperature : 0-65�ºC with RH 90%
15. Duty Cycle : Continuous
16. Indications on each phase : Input Mains, Input Low, Input Voltage, Input High, Out
Voltage.
17. Controls on each Phase : Auto/Manual Push Button, Increase/Decrease Push
Button Voltâ??s adjuster Set Button
18. Metering : Digital
19. Mounting : On Wheel
20. Construction : MS Sheet Body, Prime Grade Powder Coating
21. Spares Availability : Available with Company
22. Transformer Winding : Prime Grade Copper Wire on CRGO Core
23. Servicing & Maintenance : Easley can be do by any technical known Person
And from company side on call log.

Specifications
1)Input voltage:304V-456V
2)Output voltage:380V
3)Three-phases, four-line
4)Output deviance:1%~5% adjustable
5)Frequency:50HZ/60HZ
6)Efficiency:Y95%( power above 50kVA)
7)Response time:¨¹1.5S
8)Ambient temperature:- 10centigrates ~+40centigrates
9)Insulation resistance:Y5M|
10)Overload capacity:Double rated current, one min
11)Waveform distortion:Non-lack fidelity waveform
12)Protect:Overvoltage, overcurrent, lack sequence,phase sequence

Products Models are below or also can be as your required

Model Output Power Outline(L*W*H) Net Weight
SBW-50K 50KVA 80*54*135cm 250kg
SBW-60K 60KVA 80*54*135cm 255kg
SBW-100K 100KVA 85*62*150cm 357kg
SBW-150K 150KVA 100*70*165cm 482kg
SBW-180K 180KVA 100*70*165cm 515kg
SBW-200K 200KVA 100*70*165cm 562kg
SBW-225K 225KVA 110*80*185cm 670kg
SBW-250K 250KVA 110*80*185cm 710kg
SBW-300K 300KVA 110*80*195cm 755kg
SBW-320K 320KVA 110*80*195cm 810kg
SBW-400K 400KVA 100*80*200cm 1175kg
SBW-500K 500KVA 100*80*200cm 1510kg
SBW-600K 600KVA 100*80*200cm 1790kg
SBW-F-800K 800KVA 85*120*200cm 2750kg
SBW-F-1000K 1000KVA 85*120*200cm 2780kg
SBW-F-1200K 1200KVA 85*120*200cm 4050kg
SBW-F-1600K 1600KVA 135*130*220cm 5500kg
SBW-F-2000K 2000KVA 135*130*220cm 7050kg


Exporting packing standard

Eldee servo voltage stabilizers are available in a wide range and various models. The standard three phase models are suitable for balanced and unbalanced supply and loads.Our voltage stabilizers are available ranging from 1 kva-2000 kva

As per required good

High-speed copper plating of welding wire is brown brown liquid, which is used for non electrodeposition of high-speed copper plating film on iron to facilitate wire drawing process. It can make copper ions deposit orderly, make copper deposit compact, and have strong adhesion. At the same time, the complexing agent can also effectively complexe excessive iron ions in the tank solution, so that the tank solution remains stable. The deposition film is golden yellow and pink, which is loved by users. It can be used as immersion or continuous production line. The weight of copper film is 5-20g/m2

(Using Variable Auto Transformer)
Technology -controller based with digital signal processing
Type Three Phase, 4 wire
Make BHAGWATI
Input Voltage Rangecustomized
Output Voltage customized +/- 1%
Input Frequency Range Hz
Rate of correction 70 V/Sec Line to Line
Efficiency - >98% at full load
Type of Load Unbalanced
Features:-
� controller based technology with digital signal processing.
Output voltage adjustment +/-10V.
Output voltage On-delay 5 Sec.
LCD display for all critical parameters.
Continuous voltage and current monitoring for each phase.
Load Power factor Unity
Protection :-
High / Low Voltage cut off at input and output
Short circuit / Overload protection
Input/Output Line - Neutral voltage monitoring.
Load current monitoring for each phase.
Single Phasing Protection.

Beta Power Controls, Coimbatore, India an ISO 9001:2015 TVE accredited company, leading manufacturing & Exports of Industrial Voltage Stabilizer, Isolation Transformers, Frequency Converter ,Two phase to three phase converter, Variable Transformer, Rectifiers energy saving equipment in India . Our products are well appreciated world over and received much recognition for their quality.

Established in 2007 with a corporate objective to provide efficient energy for greener future,Beta power controls has grown to be one of the countryâ??s biggest manufacturers of power saving and power conditioning equipmentâ??s with the largest satisfied customer base. The products manufactured by us have made a distinct place in the market owing to their features like excellent performance, longer lifespan and less power consumption. With an objective to manufacture quality products, our experts use the latest equipment and best quality raw material provided by our trusted vendors of the market. We regularly Exports to Servo voltage Stabilizer in sudan.We are successfully meeting the varied requirements of our clients by providing the best quality range of 60kVA Oil Cooled Servo Stabilizers offered comprise highly functional Voltage Stabilizers that are designed using latest technology support so as to provide for optimum functional usage. These Voltage Stabilizers find extensive usage in controlling voltage fluctuations using solid state electronic circuitry. Being oil cooled stabilizers, these function as automatic line voltage correctors that use the synchronous motor that provides for optimum functional usage.

Features:

High efficiency & Fast response
Wide input voltage range trip conditions
99.99% failure proof control circuit
No over under, shoots and hunting
Built in by pass switch up to 300 kVA
Less active component avoids failure ratings
Special electronic circuit to operate on gensets
No effect of power factor and frequency variation
The Voltage at speed related to the rate of fluctuations and avoids oscillations & hunting In AC motor drive
Variable speed high torque ac servo motor proportionally controls corrections
Separate isolated PCB for triac switching for the motor

Protection:

Input and Output Low/high Voltage protection.
Phase rotation/single phasing preventer.
Input protection using mcb / mccb.
Output overload protection
Surge control protection

Input voltage range:

Range I: 360 - 480 V

Range II: 340 - 480 V

Range III: 310 - 480 V


*The input voltage, output voltage, frequency and phase can be custom made.