Pendulum Impact Testing Machine

Glass Bottle Pendulum Impact Test Machine is applicable in testing the impact resistance of various glass bottled products, for instance, beer bottles, wine bottles, beverage bottles, etc. It is a referential instrument for breweries, glass bottle plants, pharmaceutical manufacturers.

Features
Automatic electronic measurement mode.
Touch interface can concurrently display impact energy and angle values.
The instrument is equipped with micro-printer.
Users can freely shift modes of passing test and destructive test.
Functions of ISP remote online control and upgrade are advanced.
The loading clamp can be moved freely in vertical and horizontal directions, which is convenient for users to adjust the position of the bottle during the process.
The design and manufacturing of the instrument strictly comply with the international standard requirements for parameters of materials and accessories to provide reliable guarantees for users to accurately test and experiment.
Positioning accuracy, rotating and moving freely of the pendulum are attained. Protective cover of stainless steel safety shield is full of hommization.

Principle
According to the law of conservation of energy, the energy of the pendulum impacting the sample bottle each time is determined by the potential energy when the pendulum is suspended and positioned before impact. When the angle at which the pendulum is suspended is a certain value, the potential energy of the pendulum is also a certain value, and the impact energy of the pendulum on the glass bottle is also a certain value. According to the fixed relationship between the hanging angle of the pendulum and the impact energy of the pendulum, the pendulum is released after a certain amount of energy is present, so that the striking point impacts the sample bottle placed on the sample loading fixture, and then observe the sample bottle is broken or not, and judge the impact resistance of the sample bottle accordingly.

Standard
GB/T 6552-86.

Specifications
Impact Capacity 0 ~ 2.5 N�·m
Diameter of Specimen �¤20-165 mm� (Clamp can be customized)
Height of Specimen 20 ~ 180 mm
Resolution 0.01 Nm
Dimension 530mm (L) 350mm B) 700mm (H)
Net Weight 20 kg

Configurations
Standard: Instrument, Protective Cover, Level-Meter.
Optional Non-standard Loading Clamp.

Reference Standard:
BS EN 12600:2002 Glass in building Pendulum test Impact test method and classification for flat glass
Technical Data:
1) Pneumatic Tyres Impactor:
Weight: 50 kg ± 0.1 kg
Tyre pressure: 0.35Mpa ± 0.02Mpa
Tyre type: 3.50-R8 4PR
Sample size: 876 mm ± 2 mm * 1938 mm ± 2 mm
Inside the sample frame: 847 mm ± 5 mm * 1910 mm ± 5 mm
Impact frame footprint: 1300 mm*3900 mm*3700 mm
Lifting mode: manual, automatic optional
Impact body release mode: manual, automatic optional
2) Impact Testing Frame:
Frame Size: 1900mm*1500mm*3570mm
Samples Size: 1930mm*864mm
Lift: Electric
Release: Auto
Maximum impact height: 1200mm (customized)
Rubber Pad Width: 15mm
Rubber Pad Thickness: 3mm
Rubber Pad Hardness: Shore A50


Manual type: Manual lifting , manual release, mechanical clamping
Main frame: internal width(847±5)mm internal height(1910±5)mm
Clamping frame: internal width(847±5)mm internal height(1910±5)mm
Rubber strip: (20±2)mm wide, (10±1)mm thick, hardness: (60±5) IRHD
Note: we will provide (20±2)mm wide, (10±1)mm thick, hardness: (60±5) Shore A
Dimension of test pieces: width(876±2)mm, height(1938±2)mm
Drop height: 190mm, 450mm, 1200mm

Impact Testing Equipment
Testing Machine for Mechanical Properties of Tempered Glass

Shot Bag
1) Weight:45kg±0.1kg 46kg±0.1kg
2) Height: 330mm ± 13mm
3) Max diameter: 250mm
4) Lead sand size: 2.5mm
Pneumatic Tyres Impactor
Pneumatic Tyres Device for Pendulum Test of Glass In Building According to BS EN 12600
Reference standard:
BS EN 12600:2002
Glass in building - Pendulum test - Impact test method and classification for flat glass
MS 1498:2017
Safety glass in building - Specification
Technical Parameters:
Weight 50 kg ± 0.1 kg
Tire pressure: 0.35Mpa ± 0.02Mpa
Type: 3.50-R8 4PR

Impact Frame
Test Frame:
Frame Size: 1900mm*1500mm*3570mm
Samples Size: 1930mm*864mm
Lift: Electric
Release: Auto
Maximum impact height: 1200mm (customized)
Rubber Pad Width: 15mm
Rubber Pad Thickness: 3mm
Rubber Pad Hardness: Shore A50
Drop Ball Impact Test Machine
Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object
Hardness steel ball:
a) 2260g ± 20g, diameter of approximately 82.5mm
b) 227g ± 2g, diameter of approximately 38 mm
c) 1040g ± 10g, diameter of approximately 63.5 mm
d) 508g±3g, diameter of approximately 50 mm
Frame Height: 1000mm, 5000mm, 12000mm, Customized
Automatic release and lift. Power: 220V 50Hz 580W
Supporting fixture:
a) Support Size: 350mm*350mm and 660mm*660mm (Customized)
b) Frame width 15mm
c) Steel box height 150mm
d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50
e) Interposed sheet of rubber: thickness 3mm, hardness shore A50
Applied Test Pieces Size: 300mm*300mm 610mm* 610mm
Head-form Test Device
Head Weight: 10kg
Head Size: 500mm*932mm
Impact height: < 1.5m
Samples size: 1100mm*500mm
Felt hat: 90g/89mm/3mm
Frame size: 1400mm*666mm*320mm

It is used to measure the rebound value of vulcanized rubber and elastomer. ( Hardness requirement: 30-85IRHD)

227 g Ball Test
2260 g ball test
Test Method for Ball Drop Impact

Glazing Materials Ball Test Device
Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object
Suitable for impact test of safety glass and tempered glass.
Related Standard:

1) ISO 3537 Road vehicles Safety glazing materials Mechanical tests Clause 6: 227 g ball test, Clause 7: 2260 g ball test
2) GB 15763.3 Safety glazing materials in building Part 3: Laminated glass--Appendix B Drop ball impact specimen support
Principle:
Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object

1) Top pulley group 2) Column 3) Square tube 4) Lower limit switch 5) Encoder bracket 6) Motor 7) Wire take-up 8) Base 9) Release device 10) Electromagnet 11) Expansion bolt 12) Leveling screw



Steel Ball 2260g / 82mm 1040g / 63mm 535g / 51mm 508g / 50mm 227g / 38mm
Drop Height: 1000mm, 5000mm, 12000mm, Customized
Automatic release and lift. Power: 220V 50Hz 580W

Supporting fixture:
a) Support Size: 350mm*350mm and 660mm*660mm (Customized)
b) Frame width 15mm
c) Steel box height 150mm
d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50
e) Interposed sheet of rubber: thickness 3mm, hardness shore A50
Applied Test Pieces Size: 300mm*300mm 610mm* 610mm




227 g Ball Test, 2260 g Ball Test, Test Method for Ball Drop Impact, Ball Test, Support Fixture, Support Frame, Safety Glazing Materials Test, Mechanical Test, Drop Ball Impact, Ball Drop, Glass test, Impact Test, Glass Impact

Support Fixture and frame for 227 g ball test and 2260 g ball test of Safety glazing materials. Laminated glass Drop ball impact specimen support. Related standard ISO 3537. Professional impacting testing equipment of Mechanical tests for Building glazing and Road vehicles glazing


This testing device confirms to the standards of ISO3537and GB15763.3. It is applicable for the impact performance test of the equipment enclosure. It has the advantages of accurate performance and convenient operation as well as reasonable layout. Adjusted to a certain height, the steel ball, whose weight is required, falls down to hit the testing sample. Then the tester can judge the quality of the sample according to the damage degree of the testing sample. It can be used in the fastness test of the enclosure with the material of plastic, ceramic, acryl and Glass fiber.

Usage :
Measuring the impact resistance intensity of the non-metal materials (including plastic pipes)
Conform to the standards
Iso179, jb/t8762-1998, iso9854
Main technical parameter
Modeldigital display
Typexjjd-50
Impact energy7.5j, 15j, 25j, 50j
Velocity at impact3.8 m/s
Strike center distance395mm

Impact test bench is a kind of impact and impact test equipment with novel design, high degree of automation, simple operation and easy maintenance. It can perform the conventional impact test of half sine wave, back peak sawtooth wave, square wave and other waveforms.

Ball Drop Impact Test Machine
Drop Ball Impact Specimen Support and Frame for Laminated Glass


Related Standard:
ISO 3537 Road vehicles Safety glazing materials Mechanical tests Clause 6: 227 g ball test, Clause 7:2260 g ball test
GB 15763.3 Safety glazing materials in building Part 3: Laminated glass Appendix B: Drop ball impact specimen support



Ball Drop Impact Test Machine



1: support steel box 2: rubber pad 3: steel box pressure frame 4: sample control rod 5: control box 6: sample control rack 7: adsorption device 8: steel ball



Principle:
Determination of whether the safety glazing material has a certain minimum strength and cohesion under impact from a small hard object

Apparatus:
Hardness steel ball:
a) 2260g, 82.5mm
b) 227g, 38 mm
c) 1040g, 63.5 mm
d) 508g, 50 mm

Frame Height: 1000mm, 5000mm, 12000mm, Customized
Automatic release and lift. Power: 220V 50Hz 580W

Supporting fixture:
a) Support Size: 350mm*350mm and 660mm*660mm (Customized)
b) Frame width 15mm
c) Steel box height 150mm
d) Rubber Gasket: thickness 3mm, width 15mm, hardness shore A50
e) Interposed sheet of rubber: thickness 3mm, hardness shore A50
Applied Test Pieces Size: 300mm*300mm 610mm* 610mm