Universal Material Testing Machine

Equipment summary:
RT-201A desktop computer servo testing machine is a new material testing machine that combined with the electronic technology and mechanical transmission, it has accurate load speed, range of force measurement, Has high accuracy and sensitivity for the load, displacement measurement and control. This series of machine using single-space structure, operational space at the bottom,it is mainly applied to test non-metallic and metallic material ,which the load is less than 2kN , it has the parameters, such as stress,strain, control mode of displacement ,calculated max force, tensile strength, bending strength, compressive strength, elastic modulus, rate of elongation, yield strength and others.

Main function:
This machine can be applied to test lots of materials in tension, compression, tear, peel (can 90 degrees and 180 degrees) and other mechanical test, such as rubber, tires, belt, shoes, plastic, film, acrylic, FRP, ABS, EVA, PU, aluminum-plastic pipe, composite materials, waterproof materials, fibers, textiles, wire and cable, paper, gold foil, ribbons,thread, spring, wood,medicine packaging materials, tapes etc.

Technical parameters:
Model RT-201A
Maximum load 50N,100N,200N, 500N, 1KN,2KN(optional )
Accurate grade 1grade / 0.5 grade
Effective measuring range Force from 0.2% to 100% / from 0.4% to 100%
Measuring accuracy the value ±1% / the value ±0.5%
Tester resolution Max load: 1/200000, constant the resolution
Load sensor Basic configuration sensor max load: one
Effective tensile stoke 500mm (can be increased the tensile space according to customers requirement )
Testing speed From 0.001 to 500mm/min
Accuracy of displacement measurement Tolerance:±0.5% / tolerance: ±0.2%
Safety Electronic-limit protection
Testing platform moving device Fast /slow( two speeds to control ),can jog
Return Back Manual or automatic operation, After the test, the moving iron return to initial position with the highest speed by manual or automatic operation
Overload protection Overload 10%, automatic protection
fixture A set of tensile clamp
Machine size 45x58x135cm (L*W*H)
Motor Delta AC servo motor and drive
Power supply 220V , 50HZ or according to the requirement
Power 0.4KW ( depending on different demand of force,using different motor)
weight About 75KG
Unit KG,N,LB, TON can be exchanged.

1. Applications of testing machine
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.
2. Features of testing machine
1) adopting aluminum alloy cover, with attractive streamline structure
2) mainly used to test mechanical properties for metal, non-metal and composite materials
3) adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications
4) after test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out.
5) with remote control box to realize speed adjustment of crossbeam, flexibly and freely switched
6) with functions of automatic return to original position, intelligently, efficiently, quickly
7) with limit position function of any working position and over voltage, over current protection functions, reliable and safe
8) with many control modes of constant speed control to force, stress, deformation, strain and low cycle and user self-programming control
9) switch among many test curves: stress-strain curve, load-deformation curve, load-displacement curve, load-time curve, deformation-time curve, displacement-time curve. Partial enlargement, overlap and comparison.

1. Applications of testing machine
This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration.

2. Features of testing machine
1) Adopting aluminum alloy cover, with attractive streamline structure

2) Mainly used to test mechanical properties for metal, non-metal and composite materials

3) Adopting precision auto control and data acquisition system to realize fully digital adjustment to data acquisition and control process. During test, it can test max. Bearing tensile force, compression force, tensile strength, deformation, elongation, yield point and other technical specifications

4) After test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be printed out.

3.Spec. of testing machine
No.Item Spec.
1Max. Load 20KN
2Resolution of test force±300000
3Resolution of displacement0.001mm
4Precision of crossbeam displacement±0.5%
5Precision of deformation±0.5%
6Measuring range of test force1%-100%FS
7Relative error of test force±1%
8Relative error at zero point±0.5%
9Speed of crossbeam0.01-500mm/min
10Precision of crossbeam speed±1%
11Speed range of load0.005%-5%FS/s
12Precision of load speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value

13 Speed of deformation0.005%-5%FS/s
14 Precision of deformation speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value

15 Stroke of crossbeam 900mm
16 Effective tensile height 650mm
17 Effective test span 400mm
18 Effective compression height 800mm
19 Diameter of compression platen 100mm
20 Voltage and power 220V10%, 50Hz, 700W
21 Dimension of main machine650X450X1650mm
22 Weight of main machineabout 300kg

1. Applications of testing machine
ï?·This machine is applicable to metal, cementing compound, tubes, sectional bars, aerospace, petrochemical, waterproof rolls, wire and cable, textile, fiber, rubber, ceramics, food, mechanical packaging, geo-textile, film, wood, paper and other industries and quality supervision department, and it also can be used in college for teaching demonstration. 
2.Specs. of testing machine
No.ItemSpec.
1Max. Load10KN
2Resolution of test force1/±300000
3Resolution of displacement0.001mm
4Precision of crossbeam displacement±0.5%
5Precision of deformation±0.5%
6Measuring range of test force1%-100%FS
7Relative error of test force±1%
8Relative error at zero point±0.5%
9Speed of crossbeam0.01-500mm/min
10Precision of crossbeam speed±1%
11Speed range of load0.005%-5%FS/s
12Precision of load speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value
13Speed of deformation0.005%-5%FS/s
14Precision of deformation speedWhen speed is less than 0.05FS/s, precision is within ±1% of set value, when speed is more than 0.05FS/S, precision is within ±0.5% of set value
15Stroke of crossbeam900mm
16Effective tensile height650mm
17Effective test span390mm
18Effective compression height800mm
19Diameter of compression platen100mm
20Voltage and power220V±10%, 50Hz, 700W
21Dimension of main machine550X400X1650mm
22Weight of main machineabout 260kg

Application:
For static and cuasi-static test (low frequency fatigue) for high loads in many types of tests. Specially indicated to switch test mode, thanks to its dual space design.

Double test space frame:
With high structural stiffness,4 columns and 2 screws with double testing space
The upper space is intended for tensile tests, and the lower for compression, shear, bending, folding, etc.
Manufactured according to Standards EN 10002-2; ASTM E4, ISO 7500-1; DIN 51221 and BS1610 guide. Mobile crossbar separates the two test zones and is positionable in height by means of two spindles driven by an integrated electric motor frame.

This series materials testing machine product group was primarily developed for standardized tests on ma- terials and components. Used in conjunction with the intuitive KStest software.

Typical test applications for wide range of tension, compression, bending, shearing and low cycle test, include metal, rubber, plastic, spring, high strength steel (HSS), aerospace and automotive structures, screws, nuts, etc.

Standards:
ASTMA370, ASTME4, ASTME8, ASTME9, ISO6892, ISO7438, ISO7500-1, EN10002-4, GB/T228-2002, GB 16491-2008, HGT 3844-2008 QBT 11130-1991, GB13-22-1991, HGT 3849- 2008,GB6349-1986, GB/T 1040.2-2006, ASTM C165, EN826, EN1606, EN1607, EN12430 etc

Its new floor type universal material testing machine which applied by latest design and producing skill to have strong structure, saving transmission power and electric current without specific power system. Undoubtedly we still keep the advantage for testing precision, simply operation, expand strong. Its the best choice for material testing machine.

1. Equipment usage:
This testing ± 1/500000,
Relative error of indication: better than ± 1% of the indication,
2 displacement (moving crossbeam, excluding stretching fixture),
Measurement range: 0-700mm,
Resolution: 0.0025mm,
3 Test speed:
Speed adjustment range: 0.01-500mm/min (stepless speed regulation),
Accuracy: better than ± 0.5% of the indicated value,
Displacement rate control accuracy: within ± 1.0% of the set value when the rate is less than 0.1mm/min;
When the speed is 0.1mm/min, within ± 0.2% of the set value,
4 Control:
Force control speed regulation range: 0.005-5% F.S/S,
Force control rate control accuracy: within �± 2% of the set value when the rate is less than 0.05% FS/S;
When the rate is 0.05% FS/S, within the set value of ± 0.5%/ ± 1.0%,
Deformation speed regulation range: 0.005% FS/S,
Deformation rate control accuracy: within ± 2% of the set value when the rate is less than 0.05% FS/S;
When the rate is 0.05% FS/S, it is within ± 0.5% of the set value,
Constant force, constant deformation, and constant displacement control range: 0.5% -100% FS/S,
Constant force, constant deformation, and constant displacement control accuracy: within ± 0.1% of the set value when the set value is â 10% FS;
When the set value is less than 10% FS, within ± 1% of the set value.
5 Effective test space (with fixture):
Effective stretching space: 700mm,
Effective compressed space: 700mm,
6. Working environment: Room temperature 10~35 , humidity 20%~80%,
7. Power supply for the entire machine: single-phase, 220V ± 10%, 50Hz,
8 Host size: 530 370 1400mm,
9 Weight: 140 kg,