Product Features:
1. PFA material (translucent)
2. High and low temperature resistance: -200 C to 260 C
3. Strong acid and alkali resistance, high temperature resistance, wear resistance, antistatic
4. No dissolution and precipitation, no contamination of samples
5. Integral molding
The PFA cleaning tank, also known as an acid tank, acid bath, square tank, or acid pickling tank, is a high-performance cleaning device specifically designed for industries such as semiconductors, photovoltaics, and optoelectronics. It is produced through integral molding using imported high-purity PFA raw materials, eliminating the risk of leakage. This cleaning tank can be used for storing high-purity reagents, cleaning wafers and chips, and placing on electric heaters to steam and clean laboratory utensils.
PFA Cassette / Teflon Cassette, Capacitor of wafer can be customized and designed by customers' request, able to resist strong acid, strong hydrofluoric acid, strong base and heat up to 200~220 C, use to deliver wafers in acid & base process of Fabrication factory.
The Wafer Carrier is made from PFA, able to resist strong acid, strong hydrofluoric acid, strong base and heat up to 200~260 C, use to deliver wafers in acid & base process of Fabrication factory.
Low profile design allows the greatest possible wafer exposure to increase cleaning and drying efficiency. Enhanced stability for horizontal wafer handling.
H-shaped end for equipment interface. Solid end wall. Wash slots in side walls. Improved predictability of wafer .
1. Product introduction
The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers.
Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank
Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm
Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination.
2. Features:
1. The appearance is translucent, making it easy to observe the reagents in the tank;
2. High and low temperature resistance: -200ï½?+260â??
3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents;
4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency;
5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb;
6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.;
8. Stable chemical properties, good recoverability, and not easy to deform;
9. Teflon plastic, durable and not fragile.
PFA cleaning tank is a container used for soaking and cleaning semiconductor wafers and chip flower baskets, and can also be used for soaking and cleaning of trace analysis laboratory PTFE containers (such as microwave digestion tanks, reagent bottles, beakers, crucibles, etc.).
The design of integrated molding can avoid liquid leakage.
The PFA cover can prevent dust pollution.
The PFA cleaning tank size can be customized to meet different experimental needs.
#labwarecleaning #cleaningtank #semiconductor #wafercleaning #traceanalysis
The cover and body are made of high-purity imported PFA material and do not contain other impurities. Resistant to strong acids and alkalis, the utensils can be put into a cleaning tank and soaked in acid for cleaning.
#acidcleaning #teflon #labware #icpms
1. Product Introduction
PFA cleaning tank is an upgraded version of PTFE cleaning barrel, specially designed for semiconductor photovoltaic and other industries, with one-piece molding, no need to worry about leakage. It is mainly used for soaking and cleaning flower baskets with chip silicon wafers. Due to the characteristics of PFA, it can withstand the corrosiveness of the cleaning solution, and at the same time, the blank value of metal elements is low, there is no dissolution or precipitation, and it will not pollute chip wafers, etc.
Alias: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank
Tank capacity: 15L External dimensions: 300*210*240mm Cover: 340*240*45mm
Tank capacity: 18L External dimensions: 390*280*205mm Cover: 400*300*42mm
New model: 400*300*12cm
The size of the semiconductor wafer cleaning tank can be customized as required. At the same time, it is equipped with the same PFA cover to prevent pollution.
2. Features:
1. Translucent appearance, easy to observe the reagents in the tank;
2. High and low temperature resistance: -200ï½?+260â??
3. Corrosion resistance: strong acid, strong alkali, aqua regia, HF and various organic solvents;
4. Insulation resistance: dielectric properties are independent of temperature and frequency;
5. Anti-pollution: low background value, metal element lead and uranium content is less than 0.01ppb;
6. No dissolution and precipitation, will not pollute chips, wafers, silicon wafers, etc.;
8. Stable chemical properties, good recoverability, not easy to deform;
9. Teflon plastic, durable and not easy to break
Nanjing Binzhenghong Instrument Co., Ltd. has more than 30 years of experience in the production and processing of PFA products. The company has invested a lot of manpower and material resources in the research and development of solar photovoltaic related products. Up to now, the photovoltaic products launched by the company include-solar silicon wafer basket, solar silicon wafer carrier, silicon wafer basket, semiconductor cleaning basket, PFA tweezers, wafer gripping tweezers, PTFE basket, etc.
3. PFA products:
PFA reagent bottle, PFA volumetric flask, PFA beaker, PFA measuring cylinder, PFA measuring cup, PFA washing bottle, PFA absorption bottle, PFA tweezers, PFA flower basket (PTFE flower basket)
1. Product introduction
The PFA cleaning tank is an upgraded model after the PTFE cleaning bucket. It is specially designed for semiconductor photovoltaic and other industries. It is formed in one piece, so there is no need to worry about leakage. Mainly used for soaking and cleaning flower baskets or wafer cassettes with chip silicon cells. Due to the characteristics of PFA, it can withstand the corrosiveness of cleaning solutions. At the same time, it has a low blank value of metal elements, no dissolution or precipitation, and will not contaminate chip wafers.
Other names: anti-corrosion tank, pickling tank, overflow tank, pure water tank, soaking tank, water tank, drip tank
Tank capacity: 15L External dimensions: 300*210*240mm Lid: 340*240*45mm
Tank capacity: 18L External dimensions: 390*280*205mm Lid: 400*300*42mm Semiconductor wafer cleaning tank size can be customized as required. It also comes with the same PFA lid to prevent contamination.
2. Features:
1. The appearance is translucent, making it easy to observe the reagents in the tank;
2. High and low temperature resistance: -200ï½?+260â??
3. Corrosion resistance: resistant to strong acid, strong alkali, aqua regia, HF and various organic solvents;
4. Insulation resistance: dielectric properties have nothing to do with temperature and frequency;
5. Anti-pollution: The background value is low, and the content of lead and uranium of metal elements is less than 0.01ppb;
6. No dissolution or precipitation, and will not pollute chips, wafers, silicon wafers, etc.;
8. Stable chemical properties, good recoverability, and not easy to deform;
9. Teflon plastic, durable and not fragile.
PFA translucent customizable cassette
PFA Cassette / Teflon Cassette, able to resist strong acid, strong hydrofluoric acid, strong base and heat up to 200~220C, use to deliver wafers in acid & base process of Fabrication factory.
These cassettes keep specimens safely submerged in liquid and are resistant to histological solvents.
Low profile design allows the greatest possible wafer exposure to increase cleaning and drying efficiency and enhance stability for horizontal wafer handling.
