Metal tin is mainly used in the manufacture of alloys.
Tin and sulfur compounds - tin sulfide, which is similar in color to gold, is commonly used as a gold pigment.
Tin's modern application is as a solder for the electronics industry. Used in various purities and alloys (often with lead or indium), tin solders have a low melting point, which makes them suitable for bonding materials.
Standard
ASTM B29-03, BS EN 12659:1999, GB/T 469 -2005 ,
Content
Pb â?¥ 99.99 %
Density
11.34 g / cm 2
Color
Bluish
Weight
35 kgs / lump, 55 kgs / lump
Dimension
21" x 4" x 2.5"
Package
Standard Sea-worthy package, fixed by belt per ton
Shape
Rectangular Lump
Application
lead-acid storage batteries
Ammunition, cable sheathing, and building construction materials
counterweights, battery clamps
cast products such as: bearings, ballast, gaskets, type metal, terne plate, and foil
11,Mainly used for the preparation of â?¢ - V compound semiconductor InSb, Bi2Sb, GaSb, high purity alloys, electronic refrigeration element materials and germanium, silicon single crystal dopants.
Calcium is a silvery white metal that is harder and heavier than lithium, sodium, and potassium;
It melts at 815 C. The chemical nature of metallic calcium is very active. In the air, calcium is quickly oxidized and masked with an oxide film. When heated, calcium will burn and emit a beautiful glow of brick red. Calcium and cold water have a slower effect, and intense chemical reactions occur in hot water to release hydrogen (lithium, sodium, and potassium can cause intense chemical reactions even in cold water). Calcium is also easily combined with halogens,
sulfur, nitrogen, and the like.
1,product name:calcium metal
2,Shape :powder, lump and granulates
3,CAS:7440-70-2
4,Density:1.54g/cm
5,Melting point:850C
6,Boiling point:1440 C(lit.)
7,Application:Wheel keel
Product use:
At present, in the steel industry, the main use of metal calcium is to process into metal calcium particles, and then to make calcium iron wire or pure calcium wire, and finally used for steel refining outside the furnace, its role is to desulfurization, deoxidation, increase the fluidity of molten steel. Promote the rapid rise of inclusions in molten steel, generally used in the production of high-quality steel; as a dehydrating agent to produce anhydrous alcohol; in the petroleum industry, as a desulfurizing agent, in the metallurgical industry, it is used to deoxidize or
desulfurize . However, calcium compounds have a very wide range of uses, especially in the construction industry.
Product Name: Isopropyl myristate
Synonyms: Isopropyl Myristate, 96% 25GR; IPM 100; IPM-EX; IPM-R; Radia 7730 (IPM); Isopropyl myristate Vetec(TM) reagent grade, 98%; MYRISTIC ACID ISOPROPYL ESTER MINIMU; ISO-PROPYL N-TETRADECANOATE
CAS: 110-27-0
MF: C17H34O2
MW: 270.45
EINECS: 203-751-4
Melting point ~3 �°C (lit.)
Boiling point 193 �°C/20 mmHg (lit.)
density 0.85 g/mL at 25 �°C (lit.)
vapor pressure <1 hPa (20 �°C)
FEMA 3556 | ISOPROPYL MYRISTATE
refractive index n20/D 1.434(lit.)
Fp >230 �°F
storage temp. 2-8�°C
solubility <0.05mg/l
form Liquid
Specific Gravity 0.855 (20/4�ºC)
color Clear
Odor odorless
Application
Isopropyl myristate (IPM) is a fatty acid ester which is used as solvent in water-in-oil emulsion, oils and fatty based ointments. The use of IPM is recommended in the Sterility Test chapter of the European, Japanese and United States Pharmacopoeia (EP, 2.6.13, JP, 4.06 and USP, 71) as diluent for oils and oily solutions, as well as for ointments and creams. Indeed, its solvent properties improve the filterability of these samples.
Isopropyl myristate is known as a penetration enhancer for topical preparations. It is a water clear, low viscous oily liquid with a very good spreading capacity on the skin. Isopropyl Myristate is mainly used in cosmetics as an oil component for emulsions, bath oils and as a solvent for active substances.
1_ Machine Sizes =l=2000 Mm X W=800 Mm X H=2300 Mm
2_ Max. Waste Sizes =l=2000 Mm X W=600 Mm X H=600 Mm
3_ Sytrafoam Melting Capacity =45 Kg/ Saat
4_ Motor Power =5,5 Kw
5_ Max Melting Sizes =600 Mm X 600 Mm
6_ Safety Control =emergency Stopper
7_ Body Structure =high Speed And Pressure Resistant Welded Wire Construction
Gas yield: 210L/KG,230L/KG,260L/KG, 295L/KG according different partical size
Physical and chemical characteristics: the ore is a solid brown or black solid, pure white crystal products(including CaC2 is purple).Density of 2.22g/cubic centimeter,melting point of 2300 degrees C(with CaC2 content),in case of water immediately produce a violent reaction, the formation of acetylene, and the release of heat, calcium carbide content of different melting point will also change.
Calcium carbide (CaC2) is a pivotal inorganic compound known for its industrial form as gray-black block-like material, often displaying purple or gray cross-sections. When exposed to water, it undergoes an energetic reaction, producing acetylene gas and releasing heat. Primarily, it's employed for two key purposes: as a source of acetylene gas with applications in welding, cutting, and fuel, and as a raw material in organic synthesis for chemicals like vinyl chloride and synthetic resins.
It is mainly used in bonding upper and lower epe foam by ironing, instead of traditional bonding machine bond by hot glue and hot sol.
The working Principle is very easy, upper EPE will be iron by our high temperature heating plate, and 1~3 mm EPE foam will be removed by ironing, then laminated together with the lower EPE quickly.
Advantage:
1, double working station, improve work efficiency
2, each working station operated independently by one person, saving labor and production cost.
3,do not need hot melt glue, saving glue cost.
