Multi - Channel Forj

Hybrid singmode multimode multi - channel FORJ max speed 1000RPM moog rotary joint slipring connector



Using light signal transmission, no electromagnetic leakage.
Good sealing.
Resistance to electromagnetic interference
No contact transmission, no wear and tear.
Long life, can be up to 10 million RPM.
No friction, can be used in inflammable and explosive environment.
Can be used in extreme natural environment.
High magnetic current interference, also can work normally.

Single or Multi-Channel FORJ
FORJs are available in single and multi-channel options. The most cost and size efficient options are the single and dual channel designs. If more than two fibers are present in a system, multiplexing solutions are available to combine multiple channels onto one or two fibers to allow the use of a one or two channel FORJ.

Hybrid singmode multimode multi - channel FORJ max speed 1000RPM moog rotary joint slipring connector



Using light signal transmission, no electromagnetic leakage.
Good sealing.
Resistance to electromagnetic interference
No contact transmission, no wear and tear.
Long life, can be up to 10 million RPM.
No friction, can be used in inflammable and explosive environment.
Can be used in extreme natural environment.
High magnetic current interference, also can work normally.

Hybrid singmode multimode multi - channel FORJ max speed 1000RPM moog rotary joint slipring connector



Using light signal transmission, no electromagnetic leakage.
Good sealing.
Resistance to electromagnetic interference
No contact transmission, no wear and tear.
Long life, can be up to 10 million RPM.
No friction, can be used in inflammable and explosive environment.
Can be used in extreme natural environment.
High magnetic current interference, also can work normally.

MS150 Series multi-channel temperature monitor is a multi-point temperature measurement instrument. It takes the highest measured temperature in measuring loops as its output signal which is sent out in the form of a 4 to 20 mA standard current signal and the temperature is displayed by the built-in LED. If required, temperature at any measuring point can be shown by operating the keys on panel. Isolation is provided between the input and output.
It is mainly used in the applications of multi-point temperature measurement or alarm warning system. By adopting SMT technology, it offers excellent accuracy, reliability and anti-disturbance.
Primary Technical Characteristics
Measuring range 0¡«100¡æ¡¢0¡«150¡æ¡¢0¡«200¡æ
£¨according to user's demand£©
Input type Pt100,Cu50£¨TC if specially required£©
Measuring Points 2,3,4,5,6 points
Convert accuracy ¡Ü0.5£¥FS
linearity error < 0.1%
Output 4¡«20mA Electrical isolation output
Digital display LED
Display accuracy 0.5%
Voltage drop for display 3V
Isolated voltage Drop 2V
Isolate Voltage 1500V AC (Input/Output¡¢with isolator)
Max-load £¨V -14V~16V£©/0.025A£¨Current output £©
Limit current ¡Ü25mA
Response time 1s
Power supply 14~30V DC
Temperature draft 0.025% FS/ 1¡æ
Long-term stability ¡Ü0.1¡æper year or 0.05£¥ per year
Ambient -40~+85¡æ£¨Aluminium alloy .Casing£©
-25 ~+75¡æ£¨Plastic Casing£©
Protection level IP66£¨Aluminium alloy£©/IP62£¨Plastic£©
Anti-RFI >10v/m(80MHz¡­¡­1000MHz).

The MCM400 main for Non - industrial users sub-metering, use
../100mA or 0.333mV CT, split core design easy for install, Din-rail
mounting for every style of electrical panel in build.
The unit performs real-time metering, measures energy consumption, multi-tariff time-of-use (TOU) and monitors power quality max 4
channels circuit for three phase circuits, with LCD screen and keypad
for easy for configuration. RS485 port can send out collected value to
remote host.
Enable reliable monitoring of building electrical loads with a low
installation cost-per-point by combining sub-metering. It is ideal for
multi-tenant or departmental metering applications within office
towers, condominiums, apartment buildings, shopping centers and
other multi-user environments. Features: ·Class 0.5 basic parameter and class 1 for active energy
·4 channels three phase metering
·Current measuring .../5 or .../1 A (optional 333mV)
·Standard 35mm - 4 module DIN rail mounting
·Provide RS-485 MODBUS-RTU Communications
·Build in LCD screen, keypad for configuration
·Optional TOU record for each monitor channel
·Accept customization design

DCEM are special design for DC circuit metering, muti-channels signal
design can much reduced the hardware cost of project. One meter
provide different four channel amp reading and energy consumption
value record.
same 35mm din rail mounting shell can work with Blue Jay MCM series
meter for combine energy metering project in AC & DC circuit. Optional
analog, digital, relay and alarm output is available via field-swappable
plug-in communications modules. Also provide on-board RS485 serial
communication port (MODBUS RTU) to send data to the external
systems. ·DC Excitation Systems
·Light Rail Transit Systems
·EV Charging Monitoring
·Data Center
·Cellular Tower Energy Monitoring
·DC Energy Management Systems
·Power Distribution for Telecommunication Room
·Solar Photovoltaic Systems
·Industrial DC Control Systems
·Metallurgy and Electroplating Industries
·Wind Power Generation Features:
·DC power / energy sub-meter provides Voltage, Current, Power and Energy
measurements
·Monitor and control power switches
·Bi-directional for renewable systems (NET metering)
·Interfaces with shunt or external Hall Effect current sensors
·Up to 1000Vdc Voltage input
·Up to 4 channels energy metering
·Record last 30days energy data for all channels
·RS-485 connectivity - Modbus RTU
·Optional alarming and analog output
·Optional 4 channels digital inputs / 2 channels digital outputs

The MCM1000 Series provides a compact and robust metering solution, enable reliable monitoring of building electrical loads with a low installation cost-per-point by combining sub-metering. The unit performs real-time metering, measures energy consumption, multitariff time-of-use (TOU) and monitors power quality for max 18 channel circuits for single phase or 6 channel for three phase circuits. Advanced communications options including Modbus via RS485, I/O communications provide for extensive reliable data exchange. Multiple units can be connected together to meter unlimited number of circuits. The versatility of MCM1000 meters are ideal for multi-tenant or departmental metering applications within office towers, condominiums, apartment buildings, shopping centers and other multi-user environments. Features: ·Class 0.5 basic parameter and class 1 for active energy ·6 channels three phase or 18 channel single phase metering ·Current measuring .../5 or .../1 A (optional 333mV) ·Standard 35mm - 8 module DIN rail mounting ·Provide RS-485 MODBUS-RTU Communications ·Optional 6DI / 2DO for signal detect and remote control ·Optional external connection LCD screen, 96*96mm panel mount ·Optional TOU record for each monitor channel ·Accept customization design

Syringe pump :

Body weight and adjustable occlusion sensitivity !


Syringe 20 ml: 0.1~600 ml/h
Syringe 30 ml: 0.1~900 ml/h
Syringe 50 ml: 0.1~1300 ml/h