Aviation Fuel For Gas Turbine Engines (Jet-A1)

JET FUEL , EN590, D2, D6, ETC.

DIP AND PAY PROCEDURES FOR FOB - Non-Negotiable) - KAZ Origin - Code: HT025
* ICPO - CI
* Seller issues POP : TSR, STAT. OF PRODUCT AVALIBILITY, ATV, DTA.
* Buyer extends Seller's Tank and makes arrangement for Dip Test Schedule.
*Buyer Conducts Dip Test on Seller's Tank at Buyer's expenses & Buyer makes 100% payment for the first trial lift via TT wiring and Seller transfer title ownership of the product to the buyer. Buyer lift product into Vessel or completely take over seller's tanks for further product storage.
* Seller issues final agreement to Buyer to review contract on R&E Monthly Deliveries,
* Buyer reviews and approves contract and issued SBLC/ DLC Irrevocable, Non-Transferable, Auto Revolving for 12 months shipment value, Documentary Letter of Credit for length of Contract and for each lifting as schedule
* Buyer pays after successful Dip Test by MT103 wire transfer on each Monthly delivery.
* The Subsequent delivery shall commence according to the terms and conditions of the Contract and Seller pays

Jet A-1 Aviation Fuel - Commercial Grade Supply

We offer Jet A-1 aviation turbine fuel for commercial airlines and cargo operators. Our product meets international ASTM D1655 and DEF STAN 91-91 specifications, ensuring high thermal stability and performance. Sourced from certified refineries and terminals, available on CIF or FOB basis from major ports including Rotterdam, Houston, and Fujairah. Minimum order: 2,000,000 barrels. Full documentation and SGS inspection provided.

Request pricing, Soft Corporate Offer (SCO), and procedures today.

Aviation Jet Fuel is a type of aviation fuel designed for use in aircraft powered by gas-turbine engines. It is colourless to straw coloured in appearance. The most commonly used fuels for commercial aviation are Jet A and Jet A1, which are produced to a standardised international specification. The only other jet fuel commonly used in civilian turbine-engine powered aviation is Jet B, which is used for its enhanced cold-weather performance.

Jet fuel is a mixture of a variety of hydrocarbons. Because the exact composition of jet fuel varies widely based on petroleum source, it is impossible to define jet fuel as a ratio of specific hydrocarbons. Jet fuel is therefore defined as a performance specification rather than a chemical compound.

Aviation Jet Fuel is commonly referred to as JP54. However, this is the wrong terminology as there is no such grade of Jet Fuel. Jet A and Jet A1 are what refineries offer. Aviation Jet fuel Gas is what powers turbine aircraft engines. Worldwide, Jet Fuel is the most used low Sulphur content Kerosene. For instance, Colonial JP54 is similar to Jet A except the energy is 18.4 mj/Kg compared to the 42.8 MJ/kg of Jet A. Most importantly there is also a slight difference in additives.



Aviation Jet Fuel B is used for its extremely cold weather performance. However, aviation Jet fuel Bs lighter composition makes it more dangerous to handle. For this reason, it is rarely used except in very cold climates. A blend of approximately 30% Kerosene and 70% Gasoline. Because of its very low freezing point (60 C (76 F), it is known as a wide cut fuel and has a low flash point as well. Aviation Jet Fuel B is primarily used in some military aircraft. In Canada, it is also used because of its freezing point. Aviation Kerosene standards are published as GOST10227-86. The standard consists of different properties. It separates paraffin and gasoline in the refinery.

Military organisations around the world use a different classification system of JP (for Jet Propellant) numbers. Some are almost identical to their civilian counterparts and differ only by the amounts of a few additives. For instance, Jet A1 is similar to JP 8, Jet B is similar to JP 4. Military fuels are highly specialised products and are developed for very specific applications. Jet fuels are sometimes classified as kerosene or naphtha type. Kerosene type fuels include Jet A, Jet A1, JP 5 and JP 8. Naphthatype jet fuels, sometimes referred to as wide cut Jet Fuel, including Jet B and JP 4.

Original Jet A1 Fuel is a high-performance aviation fuel designed for use in turbine-engine aircraft. Known for its excellent combustion properties, it ensures safe, efficient, and reliable operation of aircraft, meeting international quality and safety standards.

Vopak to Vopak deals prices EN590 10 ppm US$ 540/MT, Jet fuel A1 is $82/bbl
Procedure as follows:
*VOPAK TO VOPAK*
*ROTTERDAM ð??³ð??± HOUSTON ð??ºð??¸*

ð??¢ï¸? *EN590 10PPM*
NON SANCTIONED


*PRE QUALIFICATION STEPS*
1. Buyer to provide CIS
2. Upon acceptance, Seller details will be provided for issuance of ICPO

*PROCEDURE*
1. BUYER to issue ICPO addressed to SELLER for verification and approval
2. SELLER to issue CI. BUYER signs and returns CI within 24 hours
3. SELLER to issue Authorization to BUYER for BUYER's Vopak Terminal Manager to communicate with SELLER's Vopak Terminal Manager to verify the existence of the products.This is to allow BUYER to verify fuel is real
4. After confirmation from BUYER's Vopak Terminal Manager, BUYER's Vopak Terminal Manager submits below documents to SELLER's Vopak Terminal Manager:
* Vopak Terminal Agreement or Vopak Reference Code
* Vopak Barcode
5. BUYER finalizes the Vopak Terminal Protocols
6. SELLER to issue Full POP documents to BUYER's Vopak Terminal Manager and injection begins
7. Upon completing the injection, BUYER makes full payment via MT103 TT and SELLER transfers title to BUYER
8. SELLER pays commission to its own intermediaries until the Contract is complete along with all rolls and extensions.

EN590 10ppm & Jet Fuel A1 available .Tank to Tank procedure :
TRANSACTION PROCEDURES FOR FOB â??TTTâ??
(TANK-TO-TANK)
1. Buyer issues ICPO together with tank storage agreement (TSA) for
seller approval.

2. Seller issues Commercial Invoice (CI), ICC WARNING LETTER for the
available product quantity in the
storage tank in the terminal port.

3. Buyer signs and then returns the commercial invoice with NCNDA/IMFPA
signed by all buyer Groups
with commission structures.

4. Seller Issue (3 DAY unconditional Dip Test Authorization (DTA) to be
endorsed by Sellerâ??s Company,
Buyerâ??s Company and Buyerâ??s chosen Logistic Company. Upon confirmation
of the signed unconditional
Dip Test Authorization (DTA) by both parties, Seller programs the
injection and then issues buyer the
following documents.
A.FRESH SGS REPORT INSPECTED IN LOADING TERMINAL PORT.
B.TANK STORAGE RECEIPT (TSR) WITH GPS COORDINATES).
C.AUTHORIZATION TO VERIFY (ATV).
D.INJECTION REPORT SHORE TANK.
E.CERTIFICATE OF ORIGIN.
F.AUTHORIZATION TO SELL & COLLECT (ATSC).

5. Buyer upon physical verification of the product and PPOP
confirmation, contracts SGS to conduct the
Dip test in Seller Storage Tank on Buyerâ??s expense.

6. Upon successful Dip Test, Buyer presents the tank storage receipt
(TSR).

7. Seller commences injection immediately into buyer tank and â??issues
buyer Title of Ownership
Certificate to be followed by all export Documentation.

8. Buyer makes payment by MT103 or TT wire transfer for the total
product and lifts the product, andseller pays all
intermediary involved in the transaction

Available stock in Rotterdam tank farm for jet fuel A1:
CI DIP AND PAY FOB PROCEDURE

1. Buyer sends ICPO, Company Profile along with current and valid TSA company registration certificate+ buyer passport number + company profile to seller on receipt of seller's soft corporate offer.
2. Seller issues commercial invoice of the product in tanks at the port of Rotterdam and returns commercial invoice.

3.seller will provide the Proof of Product (PPOP) documents for product verification Which include
Tank Storage Receipt (TSR)
Certificate of origin
Statement of Product Availability,
Authorization to Verify (ATV), and
Dip Test Authorization (DTA) Letter.

4.After successful verification of the PPOP, the buyer will contact the seller's Tank Storage Company to request a 1-day payment invoice to enable Buyer obtain all the necessary authorization and clearance for a Dip Test schedule.
*Or*
Buyer must have a minimum of 10 days TSR to avoid one day tank extension.

5.Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
6. Upon a successful Dip Test conducted in the seller's tanks, the buyer will make the payment for the total product cost based on the SGS Report via MT103. The seller will transfer title ownership to the buyer and send all exportation documents. The buyer can then either transfer the product into a vessel or take over the seller's tanks for further storage.
7. All intermediaries involved in the transaction will sign a Non- Circumvention, Non-Disclosure Agreement (NCNDA) and International Master Fee Protection Agreement (IMFPA). These documents will be forwarded to the seller for endorsement, and the seller will provide the Endorsed NCNDA/IMFPA and Authorization to Sell and Collect (ATSC).

TTT procedure: EN590 10pm price $460/MT, Jet fuel A1 price $76/BBL

(1) FREE ON-BOARD TRANSACTION PROCEDURE - (TANK TO TANK). Rotterdam, Houston, Fujairah, Jurong, Ningbo-Zhoushan

1. Buyer issues an official ICPO with the seller's procedure, passport copy, banking details along
with their Tank Storage Agreement "TSA".
2. Seller issues their Commercial Invoice "CI" to the buyer, Buyer signs and returns the commercial
invoice to the seller along with an Acceptance Letter of the sales and purchase procedure.
3. Seller verifies the buyer's storage facility and their Tank Storage Agreement (TSA) with the port
authority. (NB: Seller will issue a Tank-to-Tank Injection Agreement (TTIA) to be signed by all
parties only if buyer's TSA is engaged, not active or cannot be verified with the local port
authority).
4. Seller issues all POP documents below to the buyer upon a successful verification and approval
of the buyer TSA or after receiving the TTIA fully signed by all parties:
a. Injection Report.
b. Product Passport.
c. 24 Hours SGS Report.
d. Product Certificate of Origin.
e. Tank Storage Receipt (TSR).
f. Authorization to sell and collect.
g. Unconditional Dip-Test Authorization.
h. Product Title Holder Transfer Agreement.
i. NCNDA/IMFPA.
5. If required buyer may inspect by SGS (Dip Test In Tanks) at buyer's expense.
6. Upon successful verification of POP or Dip Test in the seller's tank, buyer provides Tank Storage
Receipt (TSR) to seller in order to issue the scheduled Injection Programming (IP) to be signed by
buyer storage facility and then injects the product into buyer's tanks.
7. Buyer makes the payment for the product via MT103, seller transfers the Title Holder &
Ownership of the product to the Buyer.
8. After successful Trial Lift (First Lift), Seller issues SPA/Contract for 12 months with R&E to
Buyer for processing.
9. Seller pays commissions to all intermediaries involved, for the initial lift and all subsequent lifts
according to the signed NCNDA/IMFPA.